An aftershock study of the El Asnam (Algeria) earthquake of 1980 October 10

Summary. An array of 28 portable seismic stations was operated in the region of El Asnam following the magnitude 7.3 ( M _s) thrust earthquake of 1980 October 10. Locations of 494 events are presented in this paper and provide an indication of the overall form of the aftershock distribution. Tests to establish location accuracy (particularly depth) reduce this set to 277 events which, it is argued, are well constrained. P -waves alone are used in this study as a consequence of a debate about the reliability of reading S -phases. From the reduced set of 277 events, 81 events provide well-constrained focal mechanisms.
The locations are presented in the form of maps and cross-sections, and discussed in relation to information already derived from field mapping of surface breaks and teleseismic studies of the waveforms of the main event. The zone of surface faulting (including secondary normal faulting) extended for 35 km but the aftershock distribution extends for twice this distance. Along the part of the fault which experienced substantial displacement in the main shock, the fault plane itself appears to be devoid of aftershocks, although many lie in the footwall beneath the fault. At junctions between segments of thrust faulting, strike-slip motion occurs. This is apparent in the aftershock focal mechanisms, and in the surface ruptures in one place.
The large number of aftershocks in the north-east area appears to be due to the reactivation of a fan-like system of smaller reverse faults associated with surface folding. Activity at the south-west end is considerably less than that in the north-east, and is not obviously associated with recognizable geological or morphological features.     

Eastern Mediterranean palaeoclimates from 26 to 5 ka B.P. documented by pollen and isotopic analysis of a core in the anoxic Bannock Basin

Continuous pollen and isotopic records were established for core BAN 84 09 GC retrieved from the anoxic Bannock Basin in the Eastern Mediterranean. On the basis of two ¹⁴C dates, they document the palaeoclimate between about 25.7 ka B.P. and 5.2 ka B.P. in the northern borderlands of the Ionian Basin. The upper half of the core has been redeposited.

The isotopic record displays a correlation with pollen percentages that is strong and positive for Artemisia (sage-brush) and negative for Quercus (oak). The last glacial maximum and the deglaciation are identified by these combined taxa, together with Chenopodiaceae. The glacial maximum around 18 ka B.P. (which has elsewhere been dated from 20 to 15 ka B.P.) has pollen percentages that are high for Artemisia and low for Quercus. The climate in the pollen source area was arid, cold in winter, briefly warm in summer and sustained the vegetation of a semi-desert. The onset of deglaciation after 18 ka B.P. coincides with that of the decline in Artemisia pollen percentage. However, this decline does not indicate reduced aridity, because it is accompanied by a pollen percentage rise of the even more arid herbs Chenopodiaceae and Ephedra. Throughout the deglaciation from 18 to 11 ka B.P., the aridity progressively increases, culminating at 11 ka B.P. This trend is briefly interrupted by a more humid event, shown by a peak in Artemisia pollen percentage and a smaller peak in oak; these two peaks are coeval with the Bölling-Alleröd chronozone (13-11 ka B.P.). Maximum aridity occurs during the Younger Dryas chronozone (11-10 ka B.P.). Afterwards, the oak pollen percentage begins a steady increase, and its maximum value is coeval with the lowest isotopic value, dated at 8760 ± 170 yr B.P. This period was one of high moisture, warm summers, and, according to altitude, mild to cool winters. This climate sustained forests that were Mediterranean in the lowlands and warm temperate in the uplands. A high pollen concentration is observed during this period and reveals the presence of sapropel S1, which is otherwise unrecognizable in this entirely black core. During the following period between 8760 ± 170 and 5200 yr B.P., the δ¹⁸0 reverts to slightly higher values and the Quercus pollen percentage decreases, while the pollen percentage of the wetter Ostrya, the oriental hornbeam, increases. The high pollen concentration during the deposition of sapropel S1 cannot have been caused by increased pollen input into the sea, this pollen being wind-borne, nor by increased pollen production for all taxa, both trees and herbs. We conclude that it is entirely due to increased preservation of this allochtonous organic material by the deep anoxia of the bottom water, below a thick anoxic water column. The coincidence of sapropel deposition with warm and humid local climate as well as with the second global meltwater pulse suggests that the cessation of bottom-water ventilation was due to decreased surface water density, resulting from less saline incoming Atlantic surface water, increased local runoff, and warmer winters.     

On the condition number of covariance matrices in kriging, estimation, and simulation of random fields

The numerical stability of linear systems arising in kriging, estimation, and simulation of random fields, is studied analytically and numerically. In the state-space formulation of kriging, as developed here, the stability of the kriging system depends on the condition number of the prior, stationary covariance matrix. The same is true for conditional random field generation by the superposition method, which is based on kriging, and the multivariate Gaussian method, which requires factoring a covariance matrix. A large condition number corresponds to an ill-conditioned, numerically unstable system. In the case of stationary covariance matrices and uniform grids, as occurs in kriging of uniformly sampled data, the degree of ill-conditioning generally increases indefinitely with sampling density and, to a limit, with domain size. The precise behavior is, however, highly sensitive to the underlying covariance model. Detailed analytical and numerical results are given for five one-dimensional covariance models: (1) hole-exponential, (2) exponential, (3) linear-exponential, (4) hole-Gaussian, and (5) Gaussian. This list reflects an approximate ranking of the models, from best to worst conditioned. The methods developed in this work can be used to analyze other covariance models. Examples of such representative analyses, conducted in this work, include the spherical and periodic hole-effect (hole-sinusoidal) covariance models. The effect of small-scale variability (nugget) is addressed and extensions to irregular sampling schemes and higher dimensional spaces are discussed.     

Dredged marine sediments used as novel supply of filling materials for road construction

The dredged marine sediments are classified as waste and how to deal with such kind of abandoned materials is a great challenge. The main objective of this experimental work is to provide a novel way to reuse dredged sediment as filling materials in road section. The laboratory dewatering test is performed to model the in situ evaporation and dewatering process of untreated and treated sediment with chemical binder. The impact of binder amount and time is discussed on the change of water content influenced by evaporation. To valorize dredged sediments as roadbed materials, a hydraulic binder is incorporated to investigate its effect on the bearing capacity and strength performance. The suitability of stabilized sediment is assessed based on the obtained mechanical results followed by a detailed discussion on the in situ test roads.     

Lithostratigraphy and geodynamic evolution of Lower Cretaceous sedimentary depocenter infilling,in Western Saharan Atlas (Algeria)

The Lower Cretaceous series, in the Western Saharan Atlas, shows important detritic deposits, particularly continental to nearshore red sandstones. Lithologically, it is an alternation of red clay and sandstone intercalated with some carbonate levels at the lower part of the series. These series can be subdivided into three lithostratigraphic units corresponding to Valanginian-Hauterivian, Barremian, and Aptian-Lower Albian. The lithostratigraphic analysis used to reconstitute the important subsidence in the Lower Cretaceous period, particularly in the Lower Albian. The Lower Cretaceous series could be considered as a geodynamic model characterized by individualization of independent depocenter filled with different detritic material and separated by Jurassic structures. This new situation appeared in the beginning of Lower Cretaceous (Valanginian-Hauterivian), following the Neocimmeriean tectonic phase, and it is increasing in the Early Albian, where differences of thicknesses are more important and allow the distinction of the depocenter. The biostratigraphic analysis of the clay samples yielded some foraminifera and palynomorphs. Benthic and planktonic foraminifera confirmed the Hauterivian age of the basal formation, also, two dominant forms of palynomorphs were recognized; according to the large stratigraphic distribution of the identified forms, it can be attributed to the Lower Cretaceous.     

The giant Imiter silver deposit: Neoproterozoic epithermal mineralization in the Anti-Atlas, Morocco

The world-class Imiter silver deposit, in the Anti-Atlas Mountains of Morocco, is a Neoproterozoic epithermal vein deposit genetically associated with a felsic volcanic event, and formed within a regional extensional tectonic regime. Rhyolitic volcanism related to ore formation has been dated at 550Dž Ma by ion-probe U/Pb on zircons. The economic silver mineralization is superimposed on an older, discrete base-metal assemblage associated with calc-alkaline granodioritic magmatism. The magmatism is dated at 572LJ Ma by ion-probe U/Pb dating on zircons, and by ⁴⁰Ar/³⁹Ar dating on hydrothermal muscovites. In the Anti-Atlas Mountains, the Precambrian-Cambrian transition appears as an important period for the formation of major, productive precious-metal deposits associated with volcanic events and extensional tectonics. The Imiter silver deposit constitutes a Precambrian analogue to modern epithermal deposits.     

Cristallisation fractionnée et contamination crustale dans la série magmatique jurassique transitionnelle du Haut Atlas central (Maroc)Fractional crystallisation and crustal contamination in the transitional Jurassic magmatic series of Central High Atlas (Morocco)

The Middle Jurassic plutonism of the Central High Atlas (Morocco) was emplaced in N45° trending anticlinal ridges. It is characterised by various petrographic facies including mafic rocks (troctolites), intermediate rocks (diorites, monzodiorites), and evolved rocks (syenites), together with heterogeneous facies resulting from mixing between acidic and the intermediate magmas. Mineralogical and chemical data show (i) the transitional character of the Jurassic magmatic series of the Central High Atlas and (ii) the implication of continental crust as a contaminant during fractional crystallization. To cite this article: R. Zayane et al., C. R. Geoscience 334 (2002) 97–104.     

Verification of landslide susceptibility mapping: a case study

A methodology is proposed for mapping susceptibility to landsliding and validating the results. Heavy rains in late 1996 and early 1997 led to a large number of landslids in the Rute sector (Córdoba, Southern Spain), where landslide susceptibility mapping had previously been carried out using a ‘matrix’ method developed with a Geographical Information System (GIS). Analysis of the distribution of the new landslides (or reactivated earlier ones) enabled the methodology to be validated by calculating association coefficients and determining the closeness of the match between subsequent field evidence and the previously defined susceptibility levels. From the data obtained, it can be concluded that the susceptibility mapping effectively explained the spatial distribution of landslides, thus providing valuable information on stability conditions over a widespread area. Copyright © 1999 John Wiley & Sons, Ltd.     

A method to determine warm and cool steppe biomes from pollen data; application to the Mediterranean and Kazakhstan regions

An objective method for the assignment of pollen spectra to appropriate biomes has been published recently. The aim of this paper is to improve the distinction between warm and cool steppes, thus refining vegetation and climate reconstruction, particularly during the Last Glacial Maximum. A set of modern pollen spectra from the Mediterranean and Kazakhstan regions, dominated today by open vegetation types, has been analysed statistically in order to relate pollen taxa abundances to warm and cool grass/shrub plant functional types (PFTs). A statistical test using modern pollen data shows that the method is able to distinguish between cool and warm steppe biomes with a high degree of confidence. The method has been applied to two fossil pollen records. The results of this exercise showed that cool steppe dominated in central Greece between 18 000 and 13 000 yr BP, while in western Iran the vegetation was at the boundary between cool and warm steppes. These vegetation types were replaced by warm mixed forest in Greece and warm steppe in Iran after that time span. © 1998 John Wiley & Sons, Ltd.