广东东莞地区中侏罗统塘厦组凝灰质沉积物的元素地球化学特征及构造背景

东莞地区中侏罗统塘厦组为富含凝灰质的湖泊沉积。对样品进行全岩分析和ICP-MS微量元素分析,并计算Sr/Ba、B/Ga和Ca/Mg比值,其比值变化与古盐度变化成正相关,特征显示塘厦组为咸水湖泊沉积,由下至上古盐度逐渐降低,水体深度也逐渐变浅。对样品进行ICP-MS稀土元素分析,计算各样品δCe值和(La/Yb)_N比值,δCe值介于0.83 ~ 1.31之间,(La/Yb)_N值均明显大于1或小于1,其特征反映湖泊沉积物沉积速率较低,只在塘厦组底部和上部出现相对高的沉积。元素P和Sr/Cu值反映其富集与迁移,受到气候的控制。元素P平均值在0.205×10^-2; Sr/Cu平均值大于4.0×10^-6,在中晚期出现最低值1.42×10^-6,这是塘厦组以干热气候为主,中晚期出现了短暂温湿气候所造成的。塘厦组为干热气候下缓慢沉积的咸水湖泊沉积。Zr-Th、La-Th-Sc判别图解、稀土元素特征及区域构造分析,显示中侏罗世东莞地区构造背景为活动大陆边缘的弧后盆地。受伸展作用影响,本区发育弧后裂谷型湖盆。泥岩La/Yb-∑REE源岩判别图解显示,源岩为玄武岩、花岗岩和沉积岩。     

Estimation of the rocks statistical parameters from traveltime measurements

In this paper the method for estimating the statistical parameters of the medium from traveltime measurements of refracted waves is applied to study the statistical characteristics of crystalline rocks at the Multifunctional Station Faido (Gotthard Base Tunnel, Switzerland). The method is based on the geometrical optics (GO) approximation. A covariance function for traveltime fluctuations has been obtained by considering quasihomogeneous fluctuations of sound velocity in a plain-stratified medium. Strongly anisometric (having unequal dimensions in different directions) random inhomogeneities were embedded in this medium. To estimate the statistical parameters around the tunnel, the traveltime fluctuations are calculated. It is assumed that each observation of traveltime-distance relation for a given shot-receiver group corresponds to a particular realization of a medium statistical ensemble. By calculating the variance and the zero cross intervals of the first derivative of traveltime fluctuations, the standard deviation of the velocity fluctuations and the characteristic horizontal scale of the inhomogeneities are estimated. Although the method allows to obtain the characteristic lengths of the inhomogeneities in vertical as well as in horizontal direction, the limited offset of the field data made it only possible to measure the latter. The estimated horizontal characteristic scale is about 13 m, which is reasonably close to the direct geological measurements in the studied region, where quartz lenses are dominant among the inhomogeneities. The standard deviation of the velocity is estimated as 4.5%, which might be caused by the fractured structure around the tunnel and also by the fault zone near the study area.     

Spatial predictions of geological rock mass properties based on in-situ interpretations of multi-dimensional seismic data

The article presents a statistical approach to characterize and predict engineering geological conditions in the up to 2000 m deep Faido tunnel and Gotthard base tunnel in Switzerland. Seismic investigations were conducted to improve the technology of interpreting seismic tomographic images. Overall, the goal of this study was to predict spacial maps of geological rock mass properties, such as, uniaxial compressive strength or total fracture spacing, by using up to six seismic features in combination, e.g., compression-wave and shear-wave velocities and dynamic Poisson's ratio. Self-Organizing Mapping (SOM), an artificial intelligent method, was used for the purposes of interpreting multi-dimensional geophysical attributes derived from seismic profiles of tomographic images along tunnel sidewalls. The SOM-method was applied in the Faido tunnel to delineate complex physical relations between the geological and seismic parameters. Then, the method was applied to predict geological properties around a segment of the Gotthard base tunnel with unknown geological–geotechnical conditions. The results illuminate that correlation analyses (pairwise parameter classification) are substantially less powerful than the SOM-method (multi-parameter classification) in order to interpret geological features from seismic in-situ data. Moreover, predicted spatial distributions of the total fracture spacing and the uniaxial compressive strength, for example, corresponded well with drill core and tunnel mapping results. The SOM-approach was a helpful tool for practitioners in predicting zones of instabilities and geological complexity during underground excavation processes of the Gotthard base tunnel. It is suggested to use such an interpretation method as decision support for purposes of sub/surface exploration and long-term geophysical monitoring of large-scale geoengineering projects, such as, disposals of nuclear waste and greenhouse gases or geopower plants for renewable energy (geothermal, biosoils).     

Seismic refraction profiles between Cyprus and Israel and their interpretation

Summary. A long seismic refraction profile was carried out between southern Israel and Cyprus. The seismic energy was generated by 33 sea shots each of 0.8 t explosives and was recorded by land stations in Israel and Cyprus and by ocean bottom seismographs deployed along the profile.
The results showed that the continental crust of southern Israel thins towards the Mediterranean underneath a northward thickening sedimentary cover. Cyprus is underlain by a 35 km thick continental crust thinning south-wards and extending to Mt Eratosthenes. Between Mt Eratosthenes and the Israel continental shelf the crystalline crust is composed of high velocity (6.5 km s^-1)material and is about 8 km thick. It is covered by 12–14 km of sediments and may represent a fossil oceanic crust.     

Early Paleozoic rifting and bimodal volcanism in the Ossa-Morena Zone of south-west Spain

Lower Paleozoic volcanic members have been investigated by geological, petrographical and geochemical means in a traverse across the Ossa-Morena Zone (OMZ) in south-west Spain.The volcanism lasted from the Early Cambrian to the Early Ordovician, with a peak in the Middle Cambrian. The volcanism is bimodal, starting up with acidic and ending with basic compositions. From north to south, peralkaline rhyolites change to rhyolites, and strongly enriched alkali basalts change via transitional basalts to mid-ocean ridge basalt (MORB-type basalts). The geological and magmatic evolution suggests an extensive Early Paleozoic rifting with its center along the southern boundary of the OMZ. Temporal, spatial and crustal aspects of the rifting event are presented in a geodynamic model.     

Main features of crustal structure in western and southern Europe based on data of explosion seismology

During the past two decades deep seismic sounding measurements have been carried out in western and southern Europe, mainly using the refraction method. These investigations were performed partly on a national basis but as well within international cooperative programs under the sponsorship of the European Seismological Commission.

In France, a systematic study has been executed to determine the main feature of deep structures under the Central Massif and the Paris Basin. In the Forez and Margeride regions, the sub-crustal velocity is lower (7.2 km/sec) than the normal value (8.0 km/sec) observed in the adjacent areas.

The central and southern part of Western Germany is covered by an extensive network of refraction profiles. The crustal thickness varies, similarly to France, from 25 to 35 km. A great amount of deep reflection data was obtained by commercial and special reflection work. The crust beneath the Rhinegraben area shows the typical “rift system” structure with a low subcrustal velocity (7.4–7.7 km/sec).

Very intensive refraction work has been carried out in the Alpine area. The maximum crustal thickness found near the axis of the negative gravity anomaly is about 55–60 km. Furthermore, a clear lowvelocity layer at a depth between 10 and 30 km has been detected. A key position with regard to the geotectonic structure of the Alps is held by the zone of Ivrea characterized by a pronounced gravity high. From the refraction work it may be concluded that there material of the lower crust and the upper mantle (7.2–7.5 km/sec) is overlying a layer of extremely low velocity (5.0 km/sec) which is interpreted as sialic crust.

Three years ago, a systematic study of crustal structure of the Italian peninsula has been started. Reversed profiles were observed on Sicily, in Calabria, and in Puglia. On Sicily, the structure is very complicated; the crust of the western part looks like a transition between a continental and oceanic structure whereas the eastern side shows a continental-type crust. In Calabria and Puglia, the crustal thickness has been determined to be about 25–35 km.     

Recent investigations of surficial and deeper crustal structures of the Eastern and Southern Alps

After a review of the surficial structures of the Eastern and Southern Alps a discussion of some important theories of the Alpidic Orogeny is presented. Geological cross sections, based as far as possible on the latest data, are then presented in detail. In the geophysical part the most important results of seismic, gravimetric and magnetic work have been compiled. Two vertical profiles through the earth's crust are presented showing lines of equal velocity of longitudinal waves.     

The Caledonian deformed ordovician of the Rügen area -sediment provenance and tectonic studies

Summary The Ordovician of the Rügen area shows no affinities with that of the adjacent regions of the East European Platform, situated immediately to the north (i.e. Bornholm and Skåne). By contrast, the detritus in the sandstones and greywackes points to an active continental margin in the southwest, along the southern border of the suspect Tornquist Ocean (i.e. northern Peri-Gondwana). Deformation features can be assigned to Caledonian tectonic events. The more than 3 km thick pile comprises a stacked wedge complex, which was emplaced against and onto the southwestern border of Baltica.     

Structural framework of the Bashkirian anticlinorium, SW Urals

The Bashkirian anticlinorium of the southwestern Urals shows a much more complex structural architecture and tectonic evolution than previously known. Pre-Uralian Proterozoic extensional and compressional structures controlled significantly the Uralian tectonic convergence. A long-lasting Proterozoic rift process created extensional basement structures and a Riphean basin topography which influenced the formation of the western fold-and-thrust-belt with inversion structures during the Uralian deformation. A complete orogenic cycle during Cadomian times, including terrane accretion at the eastern margin of the East European platform, resulted in a high-level Cadomian basement complex, which controlled the onset of Uralian deformation, and resulted in intense imbrication and tectonic stacking in the subjacent footwall of the Main Uralian fault. The Uralian orogenic evolution can be subdivided into three deformation stages with differently oriented stress regimes. Tectonic convergence started in the Late Devonian with ophiolite obduction, tectonic accretion of basin and slope units and early flysch deposits (Zilair flysch). The accretionary complex prograded from the SE to the NW. Continuous NW/SE-directed convergence resulted finally in the formation of an early orogenic wedge thrusting the Cadomian basement complex onto the East European platform. The main tectonic shortening was connected with these two stages and, although not well constrained, appears to be of Late Devonian to Carboniferous age. In the Permian a final stage of E–W compression is observed throughout the SW Urals. In the west the fold-and-thrust-belt prograded to the west with reactivation of former extensional structures and minor shortening. In the east this phase was related to intense back thrusting. The East European platform was subducted beneath the Magnitogorsk magmatic arc during the Late Paleozoic collision. The thick and cold East European platform reacted as a stable rigid block which resulted in a narrow zone of intense crustal shortening, tectonic stacking and high strain at its eastern margin. Whereas the first orogenic wedge is of thick-skinned type with the involvement of crystalline basement, even the later west-directed wedge is not typically thin-skinned as the depth of the basal detachment appears below 15 km and the involvement of Archean basement can be assumed.