Textural and micro-analytical insights into mafic–felsic interactions during the Oruanui eruption,Taupo

Quenched juvenile mafic inclusions (enclaves) are an occasional but informative component in the deposits of large felsic eruptions. Typically, the groundmasses of these inclusions rapidly crystallize as the mafic magma is chilled against a more voluminous, cooler felsic host, providing a physical and chemical record of the nature and timing of mafic–felsic interactions. We examine mafic inclusions of two compositional lineages (tholeiitic and calc-alkaline) from deposits of the 25.4 ka Oruanui eruption (Taupo, New Zealand). 2-D quantitative textural data from analysis of back-scattered electron images reveal a marked diversity in the groundmass textures of the inclusions, including median crystal sizes (amphibole: 14–45 µm; plagioclase: 21–75 µm) and aspect ratios (amphibole: 1.7–4.2; plagioclase: 2.1–4.0), area number densities (amphibole: 122–2660 mm^?2; plagioclase: 117–2990 mm^?2), area fractions (?) of minerals (?_plag?=?23–45%, ?_amph?=?0–28%, ?_cpx?=?0–6%, ?_oxides?=?0.6–5.5%), and the relative abundance of plagioclase and amphibole (?_plag/?_amph?=?1.0–4.6). Textural parameters vary more significantly within, rather than between, the two compositional lineages, and in some cases show marked variations across individual clasts, implying that each inclusion’s cooling history, rather than bulk composition, was the dominant control on textural development. Groundmass mineral compositions are also diverse both within and between inclusions (e.g. plagioclase from An_34–92, with typical intra-clast variability of ~?20 mol%), and do not correlate with bulk chemistry. Diverse groundmass textures and mineral and glass chemistries are inferred to reflect complex interplay of a range of factors including the degree and rate of undercooling, bulk composition, water content and, possibly, intensive variables. Our data are inconsistent with breakup of a crystallizing ponded mafic layer at the base of the Oruanui melt-dominant body, instead implying that each inclusion partially crystallized as a discrete body with a unique cooling history. Extensive ingestion of mush-derived macro-crystals suggests that mechanical breakup of mafic feeder dikes occurred within a transition zone between the mush and melt-dominant magma body. In this zone, the mush lacked yield strength, as has been inferred from field studies of narrow (meters to few tens of meters) mush-melt transition zones preserved in composite intrusions. Evidence for plastic deformation of inclusions during eruption and the abundance of fresh residual glass in inclusions from all eruptive phases suggest that the inclusions formed syn-eruptively, and must have been formed recurrently at multiple stages throughout the eruption.     

Compositional Zoning of the Bishop Tuff

Compositional data for >400 pumice clasts, organized accordingto eruptive sequence, crystal content, and texture, providenew perspectives on eruption and pre-eruptive evolution of the>600 km³ of zoned rhyolitic magma ejected as the Bishop Tuffduring formation of Long Valley caldera. Proportions and compositionsof different pumice types are given for each ignimbrite packageand for the intercalated plinian pumice-fall layers that eruptedsynchronously. Although withdrawal of the zoned magma was lesssystematic than previously realized, the overall sequence displaystrends toward greater proportions of less evolved pumice, morecrystals (0·5–24 wt %), and higher FeTi-oxide temperatures(714–818°C). No significant hiatus took place duringthe 6 day eruption of the Bishop Tuff, nearly all of which issuedfrom an integrated, zoned, unitary reservoir. Shortly beforeeruption, however, the zoned melt-dominant portion of the chamberwas invaded by batches of disparate lower-silica rhyolite magma,poorer in crystals than most of the resident magma but slightlyhotter and richer in Ba, Sr, and Ti. Interaction with residentmagma at the deepest levels tapped promoted growth of Ti-richrims on quartz, Ba-rich rims on sanidine, and entrapment ofnear-rim melt inclusions relatively enriched in Ba and CO₂.Varied amounts of mingling, even in higher parts of the chamber,led to the dark gray and swirly crystal-poor pumices sparselypresent in all ash-flow packages. As shown by FeTi-oxide geothermometry,the zoned rhyolitic chamber was hottest where crystal-richest,rendering any model of solidification fronts at the walls orroof unlikely. The main compositional gradient (75–195ppm Rb; 0·8–2·2 ppm Ta; 71–154 ppmZr; 0·40–1·73% FeO*) existed in the melt,prior to crystallization of the phenocryst suite observed, whichincluded zircon as much as 100 kyr older than the eruption.The compositions of crystals, though themselves largely unzoned,generally reflect magma temperature and the bulk compositionalgradient, implying both that few crystals settled or were transportedfar and that the observed crystals contributed little to establishingthat gradient. Upward increases in aqueous gas and dissolvedwater, combined with the adiabatic gradient (for the 5 km depthrange tapped) and the roofward decline in liquidus temperatureof the zoned melt, prevented significant crystallization againstthe roof, consistent with dominance of crystal-poor magma earlyin the eruption and lack of any roof-rind fragments among theBishop ejecta, before or after onset of caldera collapse. Amodel of secular incremental zoning is advanced wherein numerousbatches of crystal-poor melt were released from a mush zone(many kilometers thick) that floored the accumulating rhyoliticmelt-rich body. Each batch rose to its own appropriate levelin the melt-buoyancy gradient, which was self-sustaining againstwholesale convective re-homogenization, while the thick mushzone below buffered it against disruption by the deeper (non-rhyolitic)recharge that augmented the mush zone and thermally sustainedthe whole magma chamber. Crystal–melt fractionation wasthe dominant zoning process, but it took place not principallyin the shallow melt-rich body but mostly in the pluton-scalemush zone before and during batchwise melt extraction. KEY WORDS: Bishop Tuff; ignimbrite; magma zonation; mush model; rhyolite     

Preliminary Characterisation of New Glass Reference Materials (GSA-1G, GSC-1G, GSD-1G and GSE-1G) by Laser Ablation-Inductively Coupled Plasma-Mass Spectrometry Using 193 nm, 213 nm and 266 nm Wavelengths

New glass reference materials GSA-1G, GSC-1G, GSD-1G and GSE-1G have been characterised using a prototype solid state laser ablation system capable of producing wavelengths of 193 nm, 213 nm and 266 nm. This system allowed comparison of the effects of different laser wavelengths under nearly identical ablation and ICP operating conditions. The wavelengths 213 nm and 266 nm were also used at higher energy densities to evaluate the influence of energy density on quantitative analysis. In addition, the glass reference materials were analysed using commercially available 266 nm Nd:YAG and 193 nm ArF excimer lasers. Laser ablation analysis was carried out using both single spot and scanning mode ablation. Using laser ablation ICP-MS, concentrations of fifty-eight elements were determined with external calibration to the NIST SRM 610 glass reference material. Instead of applying the more common internal standardisation procedure, the total concentration of all element oxide concentrations was normalised to 100%. Major element concentrations were compared with those determined by electron microprobe. In addition to NIST SRM 610 for external calibration, USGS BCR-2G was used as a more closely matrix-matched reference material in order to compare the effect of matrix-matched and non matrix-matched calibration on quantitative analysis. The results show that the various laser wavelengths and energy densities applied produced similar results, with the exception of scanning mode ablation at 266 nm without matrix-matched calibration where deviations up to 60% from the average were found. However, results acquired using a scanning mode with a matrix-matched calibration agreed with results obtained by spot analysis. The increased abundance of large particles produced when using a scanning ablation mode with NIST SRM 610, is responsible for elemental fractionation effects caused by incomplete vaporisation of large particles in the ICP.     

Soil water dynamics under different forest vegetation cover: Implications for hillslope stability

Though it is well known that vegetation affects the water balance of soils through canopy interception and evapotranspiration, its hydrological contribution to soil hydrology and stability is yet to be fully quantified. To improve understanding of this hydrological process, soil water dynamics have been monitored at three adjacent hillslopes with different vegetation covers (deciduous tree cover, coniferous tree cover, and grass cover), for nine months from December 2014 to September 2015. The monitored soil moisture values were translated into soil matric suction (SMS) values to facilitate the analysis of hillslope stability. Our observations showed significant seasonal variations in SMS for each vegetation cover condition. However, a significant difference between different vegetation covers was only evident during the winter season where the mean SMS under coniferous tree cover (83.6 kPa) was significantly greater than that under grass cover (41 kPa). The hydrological reinforcing contribution due to matric suction was highest for the hillslope with coniferous tree cover, while the hillslope with deciduous tree cover was second and the hillslope with grass cover was third. The greatest contributions for all cover types were during the summer season. During the winter season, the wettest period of the monitoring study, the additional hydrological reinforcing contributions provided by the deciduous tree cover (1.5 to 6.5 kPa) or the grass cover (0.9 to 5.4 kPa) were insufficient to avoid potential slope failure conditions. However, the additional hydrological reinforcing contribution from the coniferous tree cover (5.8 to 10.4 kPa) was sufficient to provide potentially stable hillslope conditions during the winter season. Our study clearly suggests that during the winter season the hydrological effects from both deciduous tree and grass covers are insufficient to promote slope stability, while the hydrological reinforcing effects from the coniferous tree cover are sufficient even during the winter season. Copyright © 2018 John Wiley & Sons, Ltd.     

Thermal evolution and physics of melt extraction on the ureilite parent body

We develop a physical model of the thermal history of the ureilite parent body (UPB) that numerically tracks the history of its heating, hydration, dehydration, partial melting and smelting as a function of its formation time and the initial values of its composition, formation temperature and water ice content. Petrologic and chemical data from the main group (non-polymict) ureilite meteorites, which sample the interior of the UPB between depths corresponding to pressures in the range 3-10 MPa, are used to constrain the model. We find that to achieve the ∼30% melting inferred for ureilites from all sampled depths, the UPB must have had a radius between ∼80 and ∼130 km and must have accreted about 0.55 Ma after CAI formation. Melting began in the body at ∼1 Ma after CAI, and the time at which 30% melting was reached varied with depth in the asteroid but was always between ∼4.5 and ∼5.8 Ma after CAI. The total rate at which melt was produced in the UPB varied from more than 100 m³ s⁻¹ in the very early stages of melting at ∼1 Ma after CAI to ∼5 m³ s⁻¹ between 2 and 3 Ma after CAI, decreasing to extremely small values as the end of melting was approached beyond ∼5 Ma. Although the initial period of high melt production occupied only a short time around 1 Ma after CAI, it corresponded to ∼half (16%) of total silicate melting, and all strictly basaltic (i.e. plagioclase-saturated) melts must have been produced during this period.A very efficient melt transport network, consisting of a hierarchy of veins and larger pathways (dikes), developed quickly at the start of melting, ensuring rapid (timescales of months) transport of any single parcel of melt to shallow levels, thus ensuring that chemical interaction between melts and the rocks through which they subsequently passed was negligible. Volatile (mainly carbon monoxide) production due to smelting began at the start of silicate melting in the shallowest parts of the UPB and at later times at greater depths. Except at the very start and very end of melting, the volatile content of the melts produced was always high - generally between 15 and 35 mass % - and most of the melt produced was erupted at the surface of the UPB with speeds well in excess of the escape velocity and was lost into space. However, we show that 30% melting at the 3 MPa pressure level was only possible if ∼15% of the total melt produced in the asteroid was retained as a small number (∼5) of very extensive, sill-like intrusions centered at a depth of ∼7 km below the surface, near the base of the ∼8 km thick outer crust of the asteroid that was maintained at temperatures below the basalt solidus by conductive heat loss to the surface. The horizontal extents of these sills occupied about 75% of the surface area of the UPB, and the sills acted as buffers between the steady supply of melt from depth and the intermittent explosive eruption of the melt into space. We infer that samples from these intrusions are preserved as the rare feldspathic (loosely basaltic) clasts in polymict ureilites, and show that the cooling histories of the sills are consistent with these clasts reaching isotopic closure at ∼5 Ma after CAI, as given by ²⁶Al-²⁶Mg, ⁵³Mn-⁵³Cr and Pb-Pb age dates.     

Characteristics and implications of some Loch Lomond Stadial moraine ridges and later landforms,eastern Lake District,northern England

Moraine ridges and mounds of inferred Loch Lomond Stadial (LLS) age have been mapped at three sites (Fordingdale, Swindale and Wet Sleddale) in part of the eastern Lake District, northern England, and indicate glaciers were more widespread than envisaged by Sissons (1980, Transactions of the Royal Society of Edinburgh: Earth Sciences, Vol. 71, pp. 13–27). The moraines delimit closely the downslope/downvalley limits of the former glaciers but there is no geomorphological evidence with which to define their upslope/upvalley margins. The former glaciers are considered to have been nourished within the confines of their individual valley, cirque and hillside embayment respectively, rather than being outlet glaciers of plateau icefields. Estimated equilibrium line altitudes (ELAs) are within the range of values determined previously for LLS glaciers in the Lake District and do not necessitate revision of established palaeoclimatic parameters. Individual ELAs were probably influenced by local factors; all three former glaciers had accumulation-area aspects between north and east, limiting the impact of direct solar radiation during the ablation season, and were adjacent to extensive areas of high ground to the west and/or south that would have facilitated transfer of snow to their surfaces by winds from those directions. In Fordingdale, three essentially contemporaneous depositional landforms occur upslope of the moraines and are considered to represent hillslope adjustments following wastage of glacier ice from the site. © 1998 John Wiley & Sons, Ltd.     

A laser beacon for monitoring the mesospheric sodium layer at La Palma

We report the results of the first laser beacon experiment at the astronomical site of La Palma (Canary Islands). A continuous wave low‐power laser (a few hundred mW) system has been set up. The laser, tuned on the sodium D₂ line at 589 nm, is launched close to the zenith angle. The emission of the mesospheric sodium layer is observed from a telescope located 160 m away from the laser. The layer is therefore resolved in altitude and the different features of its dynamics are investigated.     

Evaluating the Geographic in GIS

Despite several decades of discussion and debate around the role of GIS in the discipline of Geography, it would be a stretch to argue that GIS has not irreversibly altered the discipline, both in the scope of research and teaching as well as in the wider imagination of a general public. However, it remains a challenge to incorporate the range of geographic knowledge, born of a diversity of modalities, into operational insights and analytical pre‐conditions in a GIS. To be certain, some irreconcilability between GIS and geographical inquiry is to be expected, epistemologically speaking. In what follows, we consider what might be meant by a shift to geographic analysis as scholars from disciplines in the humanities and social sciences turn to GIS as a method of observation, interpretation, analysis, and representation. In this context, we engage in a thought experiment and offer some commentary, fixing the notion of information system, while opening the geographic in GIS to more variable understanding. The point is to pursue greater development of GIS theory and method, encompassing, while not reducing, scientific, social scientific, and humanities research.     

Management Challenges for Aboriginal Cultural Heritage in Peri-urban Queensland

It is often assumed that places of cultural significance to Aboriginal and Torres Strait Islander peoples are protected under cultural heritage legislation such as the Aboriginal Cultural Heritage Act 2003 in Queensland. Such Acts are improvements on previous policies, which all but neglected Aboriginal cultural heritage. Nevertheless, the aims of policies developed at wider geographic scales, such as States within the Australian system, continue to be disconnected from the experiences of some local Traditional Owners. In this paper, we examine conflicts between non-local policy and on-ground management decisions for Aboriginal cultural heritage in peri-urban Queensland. We focus on the challenges of local Traditional Owners in peri-urban landscapes, basing our discussion on recent experiences conducting research on Indigenous land management in southeast Queensland. We examine three case studies: one in which colonial heritage values were prioritised over existing Aboriginal cultural heritage values, a second where local government failed to support a private landholder’s attempt to identify and protect a cultural heritage site, and a third where a cultural heritage site was protected but in a way that restricts the continuation of cultural practices. Developing more productive and equitable relationships between Traditional Owners and non-Indigenous decision makers, with regards to Aboriginal cultural heritage, requires new locally developed processes for engagement and we suggest how this could be achieved.     

The Symbolic Wolf: A Construal Level Theory Analysis of the Perceptions of Wolves in the United States

Charismatic wildlife can be difficult to manage due to the controversies they generate among stakeholders, which may be rooted in their symbolic meaning. Using construal-level theory, we coded the images of gray wolves mentioned by respondents to a national survey (n?=?621) and an issue public survey (n?=?447) as symbolic (abstract) or corporeal (concrete). We analyzed the relationship between these representations of wolves and several perceptions that may perpetuate social conflict. Most people thought of wolves abstractly, and abstract thoughts were associated with positive feelings toward wolves and agreement with existence beliefs regarding wolves. Concrete representations were associated with identifying as a gun or property rights advocate, hunter, or farmer/rancher. Given these disparate views of wolves, engaging stakeholders through collaborative processes designed to foster a shared understanding of this species, while addressing the concerns of those groups, could be useful in reducing conflict concerning wolf management.