CARBON DYNAMICS OF WETLAND IN THE SANJIANG PLAIN

1INTRODUCTIONWetlandsplayanimportant roleintheprocessofcar-bonstorage.Thetotalcarbonstoredindifferentkindsofwetlandsisabout15%-35%ofthetotalcarboninthegloballandsoils(POSTetal.,1982;GORHAM,1991).Inaddition,wetlandsaresignificantnaturalsources fortheatmospheric CH4 (MOORE,1994).It isestimatedthatabout110×1012gCH4 originates fromanaerobicdecompositioninthenaturalwetlands,CH4 emission fromthenaturalwetlandsis15%-30%oftheglobalCH4 emission andtheCH4 emission from thepeat land at hi…     

Sensitive observations of radio recombination lines in Orion and W51: the data and detection of systematic recombination line blueshifts proportional to impact broadening

Sensitive spectral observations made in two frequency bands near 6.0 and 17.6 GHz are described for Orion and W51. Using frequency switching we were able to achieve a dynamic range in excess of 10,000 without fitting sinusoidal or polynomial baselines. This enabled us to detect lines as weak as T _A ∼1 mK in these strong continuum sources. Hydrogen recombination lines with Δn as high as 25 have been detected in Orion. In the Orion data, where the lines are stronger, we have also detected a systematic shift in the line center frequencies proportional to linewidth that cannot be explained by normal optical depth effects.     

Accuracy Assessment of Digital Elevation Model Generated by SAR Stereoscopic Technique Using COSMO-Skymed Data

Radargrammetry technique using the stereoscopic synthetic aperture radar (SAR) images is used for the generation of a digital elevation model (DEM) of a region requires only the amplitude images. SAR stereoscopic technique is analogous to the stereo-photogrammetric technique where the optical stereoscopic images are used for DEM generation. While the advantages of the SAR images are their indifference to atmospheric transparency and solar illumination conditions, the side-looking geometry of the SAR increases the complexity in the SAR stereo analysis. The availability of high spatial and temporal resolution SAR data in recent years has facilitated generation of high-resolution DEM with greater vertical accuracy using radargrammetric technique. In the present study, attempt has been made to generate the DEM of Dehra Dun region, India, from the COSMO-Skymed X-band SAR data-pair acquired at 8 days interval through the radargrammetry technique. Here, radargrammetric orientation approach has been adopted to generate the DEM and various issues and processing steps with the radargrammetry technique have been discussed. The DEM was validated with ground measured elevation values using a differential global positioning system and the root-mean-square error of the DEM was found as 7.3 m. The DEM was compared with the reference DEM of the study area generated from the Cartosat-1 stereo data with a model accuracy of 4 m.     

Mechanical behavior and micro-structure of cement kiln dust-stabilized expensive soil

In this study, the effects of cement kiln dust (CKD) on the swelling properties, strength properties, and microstructures of CKD-stabilized expansive soil were investigated. Samples were prepared and stabilized with different CKD content ratios, ranging from 0 to 18% by dry mass. The results obtained show that the maximum swelling pressures decrease exponentially with increases in CKD content. Both the cohesion and unconfined compressive strength (UCS) increase at ratios below 10% CKD and then decrease slightly, above that ratio. CKD can also improve the strength of saturated, expansive soil. There is no visible change of UCS for soil without CKD when cured, while the UCS of a sample with 10% CKD content after curing for 90 days is higher than that after curing for only 1 day. This indicates that CKD can improve the long-term strength of expansive soil. Finally, microstructure analysis reveals that the addition of CKD reduces the montmorillonite content of expansive soil and decreases its swelling properties. The addition of CKD also changes the pore volume distribution, both the size and amount of macro-pores and micro-pores decrease with increase in CKD content. For saturated samples, the size of macro-pores is obviously reduced, while that of micro-pores is slightly increased for both treated and untreated soils. Hydration and saturation processes make the soil structure become dispersive which results in a lower strength, and adding CKD can restrain this process. The suggested optimal CKD content is between 10 and 14% and with a curing time of more than 27 days.     

A review of the metallogeny and tectonics of the Lachlan Orogen

Future mineral exploration within eastern Australia will be enhanced by resolving the tectonic evolution of the Lachlan Orogen to establish the spatial and temporal terrane distribution of the various mineral deposits. The Lachlan Orogen, from north-eastern Tasmania through to central and eastern New South Wales, is host to a number of major mineral deposit styles—including orogenic gold (e.g. Stawell, Ballarat, Bendigo), volcanic-hosted massive sulphide (e.g. Woodlawn, Currawong), sediment-hosted Cu–Au (e.g. Cobar Basin deposits), porphyry Au–Cu (e.g. Cadia, Parkes, Cowal) and granite-related Sn (e.g. Ardlethan, Beechworth). Each of these mineral deposit styles is a sensitive and diagnostic indicator of the prevalent tectonic environment during their formation. In this review, we briefly summarise the deposit- to large-scale factors that define the diverse metallogenic evolution of the Lachlan Orogen. This overview is intended to “set the scene” for subsequent specialist papers published in this thematic issue on the metallogeny and tectonics of the Lachlan Orogen in south-east Australia.     

Biomarkers in the Molar Tooth （MT）-Bearing Limestones in the Jilin-Liaoning Area of China

The origin of Molar Tooth (MT) carbonates has been argued for more than 100 years, which are a kind of Proterozoic carbonates especially composed of microsparite with ptygmatically folded and sheet-like structures. Biomarkers detected in the microcalcsparite from the Wanlong and Xingmincun formations in the Jilin-Liaoning area showed there are abundant normal alkanes, isoprenoids, hopanes, steranes, alkylmethylcyclohexanes, and alkyleyclohexanes, indicating a diversity of biological source: long-chain isoprenoids, the major components of chlorophyll, such as C19, C20, a kind of major biomarkers synthesized early by isoprenoid monomers; hopanes a type of characteristic biomarkers from prokaryote, such as archaebacteria and cyanobacteria; sterane a biomarker for eukaryote; and two kinds of alkanes with C17, C18 as the main peaks representing aquatic bacteria and with C23, C24 as the main peaks representing fungi, respectively. Biomarker analysis showed that MT is the result of bacterial and algal activities, which is a kind of organisms between aerobic and anaerobic bacteria, reproducing well in normal or slightly saline sea water under weak oxidation-reduction conditions, resulting in rapid deposition of calcite as microsparite clue to some mechanisms.     

Grain-size-sensitive flow and shear-stress enhancement at the brittle–ductile transition of the continental crust

Localized shear zones along low-angle normal faults have been identified in regions of extension at the brittle-ductile transition of the continental crust. The possibility of the strain localizing at a depth of 10 km is interpreted here as a consequence of an increase in the equivalent shear stress applied to the flow of the lower crust. This enhancement of the flow stress is seen as a prerequisite for the triggering of brittle deformation mechanisms leading to strain localization. The lower crust rheology used to examine this stress increase is strain-rate, temperature and grain-size dependent, due to the coupling of dislocation and diffusion creep. The model structure proposed consists of a top layer, the upper crust, gliding rigidly above a bottom layer, the lower crust, which deforms in simple shear. During a short time interval (1400 years), the equivalent shear stress is found to increase by a factor of up to 3 (67 MPa for anorthite and 17 MPa for quartz). For anorthite, this stress could explain the activation of a Mohr-Coulomb failure with a friction coefficient of 0.2, which is reasonable at the depth of 10 km. Dislocation creep is activated during a rapid change in the prescribed velocity, whereas diffusion creep dominates if the velocity is held constant, highlighting the importance of grain-size sensitivity for lower crustal rheology.     

A plume tectonics model for the Tharsis province, Mars

Morphological and structural data from the whole Tharsis province suggest that a number of shallow grabens radially oriented about the Tharsis bulge on Mars are underlain by dykes, which define giant radiating swarms similar to, e.g. the Mackenzie dyke swarm of the Canadian shield. Mechanisms for graben formation are proposed, and the depth, width, and height of the associated dykes are estimated. Structural mapping leads to define successive stages of dyke emplacement, and provide stress-trajectory maps that indicate a steady source of the regional stress during the whole history of the Tharsis province. A new tectonic model of Tharsis is presented, based on an analogy with dyke swarms on the Earth that form inside hot spots. This model successfully matches the following features: (1) the geometry of the South Tharsis Ridge Belt, which may have been a consequence of the compressional stress field at the boundary between the uplifted and non-uplifted areas in the upper part of the lithosphere at the onset of hot spot activity; (2) extensive lava flooding, interpreted as a consequence of the high thermal anomaly at the onset of plume (hot spot) activity; (3) wrinkle ridge geometry in the Tharsis hemisphere, the formation of which is interpreted as a consequence of buoyant subsidence of the brittle crust in response to the lava load; (4) Valles Marineris limited stretching by preliminary passive rifting, and uplift, viewed as a necessary consequence of adiabatic mantle decompression induced by stretching. The geometrical analysis of dyke swarms suggests the existence of a large, Tharsis-independent extensional state of stress during all the period of tectonic activity, in which the minimum compressive stress is roughly N---S oriented. Although magmatism must have loaded the lithosphere significantly after the plume activity ceased and be responsible for additional surface deformations, there is no requirement for further loading stress to explain surficial features. Comparison with succession of magmatic and tectonic events related to hot spots on the Earth suggests that the total time required to produce all the surface deformation observed in the Tharsis province over the last 3.8 Ga does probably not exceed 10 or 15 Ma.     

Long-Period Variations of the Eccentricity Vector Valid also for Near Circular Orbits around a Non-Spherical Body

This paper studies the long period variations of the eccentricity vector of the orbit of an artificial satellite, under the influence of the gravity field of a central body. We use modified orbital elements which are non-singular at zero eccentricity. We expand the long periodic part of the corresponding Lagrange equations as power series of the eccentricity. The coefficients characterizing the differential system depend on the zonal coefficients of the geopotential, and on initial semi-major axis, inclination, and eccentricity. The differential equations for the components of the eccentricity vector are then integrated analytically, with a definition of the period of the perigee based on the notion of “free eccentricity”, and which is also valid for circular orbits. The analytical solution is compared to a numerical integration. This study is a generalization of (Cook, Planet. Space Sci., 14, 1966): first, the coefficients involved in the differential equations depend on all zonal coefficients (and not only on the very first ones); second, our method applies to nearly circular orbits as well as to not too eccentric orbits. Except for the critical inclination, our solution is valid for all kinds of long period motions of the perigee, i.e., circulations or librations around an equilibrium point.     

Geochemistry and genotoxicity of the heavy metals in mine-abandoned areas and wasteland in the Hetai goldfields,Guangdong Province,China

The article presents the geochemical and biogeochemical characteristics of heavy metal elements within the soil–plant system in the Hetai mine-abandoned areas and wasteland, China. The cytogenetic toxic effects of gold mine wastelands environment on the chromosome and micronucleus were analyzed by genetic methods. The results showed that abundances of Au and Au-associated heavy metal elements such as Cu, As, Cd, Pb and Hg in soils, plants and the pigments in those abandoned mine areas were much higher than those in the background region. The cell structures of the plants in the abandoned mine areas were anomalous and aberrant, and there were many nano-metal particles diffused in the cells. Moreover, the heavy metal elements in those abandoned mine areas had entered the ultrastructure and caused toxicities to the organism.