The history of Jonsmod 1981–2006

This is a history of shallow sea modelling developments as viewed through the Jonsmod modelling conferences over the past 25 years. The conferences are reviewed, and what emerges is a coherent progression to present-day modelling. We also see advances in computing and oceanographic observation, although these are, of course, incidental to the modelling from the point of view of these conferences.     

Study of mango biomass (Mangifera indica L) as a cationic biosorbent

Unfertilizable fruiting buds of mango plant Mangifera Indica L, an agrowaste, is used as a biomass in this study. The efficacy of the biosorbent was tested for the removal of lead, copper, zinc and nickel metal ions using batch experiments in single and binary metal solution under controlled experimental conditions. It is found that metal sorption increases when the equilibrium metal concentration rises. At highest experimental solution concentration used (150 mg/L), the removal of metal ions were 82.76 % for lead, 76.60 % for copper, 63.35 % for zinc and 59.35 % for nickel while at lowest experimental solution concentration (25 mg/L), the removal of metal ions were 92.00% for lead, 86.84 % for copper, 83.96 % for zinc and 82.29 % for nickel. Biosorption equilibrium isotherms were plotted for metal uptake capacity (q) against residual metal concentrations (C_f) in solution. The q versus C_f sorption isotherm relationship was mathematically expressed by Langmuir and Freundlich models. The values of separation factor were between zero and one indicating favourable sorption for four tested metals on the biosorbent. The surface coverage values were approaching unity with increasing solution concentration indicating effectiveness of biosorbent under investigation. The non-living biomass of Mangifera indica L present comparable biosorption capacity for lead, copper, zinc and nickel metal ions with other types of biosorbent materials found in literature and is effective to remove metal ions from single metal solutions as well as in the presence of other co-ions with the main metal of solution.     

Slope-induced changes in channel character along a gravel-bed stream: The Allt Dubhaig,Scotland

Changes in channel character along a small river in the Scottish Highlands are described using measurements in seven reaches over a 3 km length with no significant tributaries but a decline in slope from 0.02 to 0.00015 because of local baselevel control. This decline in slope is associated with rapid downstream fining of the gravel bed followed by an abrupt transition to a sand bed. The channel pattern alters progressively rather than abruptly, in the sequence (1) near-braided, (2) meandering with active point-bar chutes, (3) meandering with active outer-bank talweg, (4) stable equiwidth sinuous. The changes in channel pattern and hydraulic geometry are predicted better by rational approaches based on critical shear stress or other physical concepts than by purely empirical discriminant or trend equations. Measurements in five reaches confirm a downstream decrease in shear stress and the amount and calibre of bedload. It is argued that the downstream changes in channel character in this stream are induced by profile concavity inherited from deglacial conditions, are typical of many streams in mountainous areas and can be understood in terms of slope-induced changes in hydraulic properties.     

Using meteorological observer data to compare wind erosion during two great droughts in eastern Australia; the World War II Drought (1937–1946) and the Millennium Drought (2001–2010)

Australian meteorological observers started using the World Meteorological Organization (WMO) weather coding system in the 1950s. This system is still in use around the world today. However, observing and recording the weather in an organized and systematic manner had been ongoing for over 100 years prior to the adoption of this coding system, and much like Australia, most countries will have historical meteorological records. In this paper we compare the wind erosion of two of the greatest droughts in Australian recorded history; the World War II (WWII) Drought (1937–1945) and the Millennium Drought (2001–2009). To do this we analysed previously unavailable meteorological observer records from the Australian Bureau of Meteorology (ABM). Wind erosion records, mostly in long‐hand written form, were translated to the modern WMO coding system for the WWII Drought and compared with the wind erosion of Australia's recently‐ended Millennium Drought, one of the longest and harshest on record. We quantify wind erosion using Dust Event Days (DED) and a modified version of a published Dust Storm Index (DSI) to show that wind erosion during the WWII Drought was up to 4.6 times higher than during the Millennium Drought. This study has international significance because it demonstrates a methodology for tracking changes in wind erosion over the past 75 years based on observer records available in every country with a history of organized weather observation. Copyright © 2014 John Wiley & Sons, Ltd.     

Scattered ground‐roll attenuation using model‐driven interferometry

Scattered ground roll is a type of noise observed in land seismic data that can be particularly difficult to suppress. Typically, this type of noise cannot be removed using conventional velocity‐based filters. In this paper, we discuss a model‐driven form of seismic interferometry that allows suppression of scattered ground‐roll noise in land seismic data. The conventional cross‐correlate and stack interferometry approach results in scattered noise estimates between two receiver locations (i.e. as if one of the receivers had been replaced by a source). For noise suppression, this requires that each source we wish to attenuate the noise from is co‐located with a receiver. The model‐driven form differs, as the use of a simple model in place of one of the inputs for interferometry allows the scattered noise estimate to be made between a source and a receiver. This allows the method to be more flexible, as co‐location of sources and receivers is not required, and the method can be applied to data sets with a variety of different acquisition geometries. A simple plane‐wave model is used, allowing the method to remain relatively data driven, with weighting factors for the plane waves determined using a least‐squares solution. Using a number of both synthetic and real two‐dimensional (2D) and three‐dimensional (3D) land seismic data sets, we show that this model‐driven approach provides effective results, allowing suppression of scattered ground‐roll noise without having an adverse effect on the underlying signal.     

The fusion crust of the Winchcombe meteorite: A preserved record of atmospheric entry processes

Fusion crusts form during the atmospheric entry heating of meteorites and preserve a record of the conditions that occurred during deceleration in the atmosphere. The fusion crust of the Winchcombe meteorite closely resembles that of other stony meteorites, and in particular CM2 chondrites, since it is dominated by olivine phenocrysts set in a glassy mesostasis with magnetite, and is highly vesicular. Dehydration cracks are unusually abundant in Winchcombe. Failure of this weak layer is an additional ablation mechanism to produce large numbers of particles during deceleration, consistent with the observation of pulses of plasma in videos of the Winchcombe fireball. Calving events might provide an observable phenomenon related to meteorites that are particularly susceptible to dehydration. Oscillatory zoning is observed within olivine phenocrysts in the fusion crust, in contrast to other meteorites, perhaps owing to temperature fluctuations resulting from calving events. Magnetite monolayers are found in the crust, and have also not been previously reported, and form discontinuous strata. These features grade into magnetite rims formed on the external surface of the crust and suggest the trapping of surface magnetite by collapse of melt. Magnetite monolayers may be a feature of meteorites that undergo significant degassing. Silicate warts with dendritic textures were observed and are suggested to be droplets ablated from another stone in the shower. They, therefore, represent the first evidence for intershower transfer of ablation materials and are consistent with the other evidence in the Winchcombe meteorite for unusually intense gas loss and ablation, despite its low entry velocity.     

Shocked quartz in polymict impact breccia from the Upper Cretaceous Yallalie impact structure in Western Australia

Yallalie is a ~12 km diameter circular structure located ~200 km north of Perth, Australia. Previous studies have proposed that the buried structure is a complex impact crater based on geophysical data. Allochthonous breccia exposed near the structure has previously been interpreted as proximal impact ejecta; however, no diagnostic indicators of shock metamorphism have been found. Here we report multiple (27) shocked quartz grains containing planar fractures (PFs) and planar deformation features (PDFs) in the breccia. The PFs occur in up to five sets per grain, while the PDFs occur in up to four sets per grain. Universal stage measurements of all 27 shocked quartz grains confirms that the planar microstructures occur in known crystallographic orientations in quartz corresponding to shock compression from 5 to 20 GPa. Proximity to the buried structure (~4 km) and occurrence of shocked quartz indicates that the breccia represents either primary or reworked ejecta. Ejecta distribution simulated using iSALE hydrocode predicts the same distribution of shock levels at the site as those found in the breccia, which supports a primary ejecta interpretation, although local reworking cannot be excluded. The Yallalie impact event is stratigraphically constrained to have occurred in the interval from 89.8 to 83.6 Ma based on the occurrence of Coniacian clasts in the breccia and undisturbed overlying Santonian to Campanian sedimentary rocks. Yallalie is thus the first confirmed Upper Cretaceous impact structure in Australia.     

Plastic ingestion by petrels breeding in Antarctica

Plastic particles were found to be common pollutants in stomachs of Wilson's Storm Petrels and Cape Petrels breeding on the Antarctic continent. Highest incidence of plastics was found in chicks of Wilson's Storm Petrels that had died before fledging. Few or no plastics were found in Snow Petrels and Antarctic Petrels. Evidence suggests that most plastics originate from wintering areas outside the Antarctic, and that relatively few plastics are available in Antarctic waters. Possible hazards of plastic levels observed in Wilson's Storm Petrels are discussed.     

Robustness of variograms and conditioning of kriging matrices

Current ideas of robustness in geostatistics concentrate upon estimation of the experimental variogram. However, predictive algorithms can be very sensitive to small perturbations in data or in the variogram model as well. To quantify this notion of robustness, nearness of variogram models is defined. Closeness of two variogram models is reflected in the sensitivity of their corresponding kriging estimators. The condition number of kriging matrices is shown to play a central role. Various examples are given. The ideas are used to analyze more complex universal kriging systems.Research performed while on leave at Centre de Geóstatistique et de Morphologie Mathématique, Fontainebleau.