Ex situ cultivation of Aplysinaaerophoba close to in situ conditions: ecological, biochemical and histological aspects

Sponges provide the largest number of biologically active natural products known from the marine environment and continue to be a very well studied phylum of marine fauna. The Mediterranean sponge Aplysina aerophoba accumulates brominated isoxazoline alkaloids such as Aplysinamisin-1, Aerophobin-2, Isofistularin-3 and the biotransformation product Aeroplysinin-1, which possesses, for example, antibiotic and cytotoxic properties. Until now, it is still being discussed which organisms – the sponge itself or associated microorganisms – are responsible for metabolite production. For cultivating Aplysina individuals under ex situ conditions, we surveyed relevant ecological factors in situ and controlled them in our aquarium system. We maintained A. aerophoba for more than 9 months and analysed changes of metabolite content and composition, microbial association as well as morphology in situ and ex situ under different light exposure. Although sponges showed slight reduction during maintenance, ex situ cultivation similar to in situ conditions provides a promising method to keep sponges and obtain their bioactive metabolites.     

Seeing Conditions at Sutherland. Results of the 1992/93 seeing campaign

In order to decide whether the seeing conditions at SAAO/Sutherland justify the erection of a 3.5 m telescope and also to compare Sutherland with the Gamsberg/Namibia site, a seeing campaign covering 15 months has been carried out. For direct comparison with the results of the seeing campaign at Gamsberg twenty years before the same QUESTAR telescope was employed. The seeing is determined by the scattering of the star-trail exposed on a film in the focal plane of the telescope. The campaign commenced in February 1992. Up to May 1993, data for 204 nights, that is 47.3% of the total number of nights, were collected. Due to wind speeds above 30 km h^-1, 25 out of the 204 nights were not considered in the final reduction. The useful 179 nights are evenly distributed over the campaign period. The median seeing value for the whole period is = 0.52. There are differences during the year: the best season gives = 0.42, the worst = 0.67. Each night was divided into three intervals, although data for each of the three intervals were not always available. Generally, there is an improvement in the seeing during the course of a night. The results are compared to the seeing values of Gamsberg/Namibia and ESO/La Silla.     

Post‐orogenic evolution of the southern Pyrenees: constraints from inverse thermo‐kinematic modelling of low‐temperature thermochronology data

The late‐stage evolution of the southern central Pyrenees has been well documented but controversies remain concerning potential Neogene acceleration of exhumation rates and the influence of tectonic and/or climatic processes. A popular model suggests that the Pyrenees and their southern foreland were buried below a thick succession of conglomerates during the Oligocene, when the basin was endorheic. However, both the amount of post‐orogenic fill and the timing of re‐excavation remain controversial. We address this question by revisiting extensive thermochronological datasets of the Axial Zone. We use an inverse approach that couples the thermo‐kinematic model Pecube and the Neighbourhood inversion algorithm to constrain the history of exhumation and topographic changes since 40 Ma. By comparison with independent geological data, we identified a most probable scenario involving rapid exhumation (>2.5 km Myr^?1) between 37 and 30 Ma followed by a strong decrease to very slow rates (0.02 km Myr^?1) that remain constant until the present. Therefore, the inversion does not require a previously inferred Pliocene acceleration in regional exhumation rates. A clear topographic signal emerges, however: the topography has to be infilled by conglomerates to an elevation of 2.6 km between 40 and 29 Ma and then to remain stable until ca. 9 Ma. We interpret the last stage of the topographic history as recording major incision of the southern Pyrenean wedge, due to the Ebro basin connection to the Mediterranean, well before previously suggested Messinian ages. These results thus demonstrate temporally varying controls of different processes on exhumation: rapid rock uplift in an active orogen during late Eocene, whereas base‐level changes in the foreland basin control the post‐orogenic evolution of topography and exhumation in the central Pyrenees. In contrast, climate changes appear to play a lesser role in the post‐orogenic topographic and erosional evolution of this mountain belt.     

海南博螯沿岸地貌与人类活动的潜在影响

The Boao coastal system along the eastern coast of Hainan Island is a dynamic delta-tidal inlet-barrier formed during the late Holocene. The delta developed inside a shallow lagoon barred by a sandy barrier with a narrow, shallow tidal inlet opening. Two major distributary channels separated by small islands characterize the delta. The lagoon is silting up receiving and trapping sediments from both the river and, in minor measure during storms, through the tidal inlet opening and barrier washovers. The barrier at the tidal inlet is highly dynamic and changes its form, accreting (migrating spit) against the inlet during fair-weather conditions and being eroded during storms and river floods.The delta has almost completely filled the lagoon and major concerns exist on the effect that ongoing large development plans may have on the environment. These concerns include the effect on floods and rate of siltation once banks of the islands have been stabilized and floodwater and sediment load are impeded from spreading over the lowlands, and the effect of increasing pollutant loads from the new facilities on the ecosystems of the increasingly restricting lagoon water and on the seashores.     

A Snapshot of the Sun Near Solar Minimum: The Whole Heliosphere Interval

We present an overview of the data and models collected for the Whole Heliosphere Interval, an international campaign to study the three-dimensional solar?Cheliospheric?Cplanetary connected system near solar minimum. The data and models correspond to solar Carrington Rotation 2068 (20 March??C?16 April 2008) extending from below the solar photosphere, through interplanetary space, and down to Earth??s mesosphere. Nearly 200 people participated in aspects of WHI studies, analyzing and interpreting data from nearly 100 instruments and models in order to elucidate the physics of fundamental heliophysical processes. The solar and inner heliospheric data showed structure consistent with the declining phase of the solar cycle. A closely spaced cluster of low-latitude active regions was responsible for an increased level of magnetic activity, while a highly warped current sheet dominated heliospheric structure. The geospace data revealed an unusually high level of activity, driven primarily by the periodic impingement of high-speed streams. The WHI studies traced the solar activity and structure into the heliosphere and geospace, and provided new insight into the nature of the interconnected heliophysical system near solar minimum.     

Thermal regime of the northwest Indian rifted margin – Comparison with predictions

We use a simple approach to estimate the present-day thermal regime along the northwestern part of the Western Indian Passive Margin, offshore Pakistan. A compilation of bottom borehole temperatures and geothermal gradients derived from new observations of bottom-simulating reflections (BSRs) allows us to constrain the relationship between the thermal regime and the known tectonic and sedimentary framework along this margin. Effects of basin and crustal structure on the estimation of thermal gradients and heat flow are discussed. A hydrate system is located within the sedimentary deep marine setting and compared to other provinces on other continental margins. We calculate the potential radiogenic contribution to the surface heat flow along a profile across the margin. Measurements across the continental shelf show intermediate thermal gradients of 38–44 °C/km. The onshore Indus Basin shows a lower range of values spanning 18–31 °C/km. The Indus Fan slope and continental rise show an increasing gradient from 37 to 55 °C/km, with higher values associated with the thick depocenter. The gradient drops to 33 °C/km along the Somnath Ridge, which is a syn-rift volcanic construct located in a landward position relative to the latest spreading center around the Cretaceous–Paleogene transition.     

Spatial Concentration in Australian Regional Development,Exogenous Shocks and Regional Demographic Outcomes: a South Australian case study

ABSTRACT

As a tribute to the massive contribution of our friend and colleague Graeme Hugo to the population and settlement geography of Australian rural areas, this paper presents a longitudinal study from his home State. It forms part of a wider study of the long-term demographic relationships between Australia’s rapidly growing regional cities and their surrounding functional regions. Of particular interest is the question of what effect the accelerating concentration of population and economic activity into a given regional city will have for the longer term demographic sustainability of its functional region as a whole. Taking the case of Port Lincoln, regional capital of most of South Australia’s Eyre Peninsula, it examines the nature of change in the functional region over the period 1947–2011, and investigates the forces feeding, and partly counteracting, the population concentration process, informed by concepts of evolutionary economic geography. In particular it traces the demographic impact (particularly differential migration and ageing trends) of exogenous shocks to the region’s essentially primary productive economic base during the period of major change from 1981 to 2011.     

Blind Source Separation for Compositional Time Series

Many geological phenomena are regularly measured over time to follow developments and changes. For many of these phenomena, the absolute values are not of interest, but rather the relative information, which means that the data are compositional time series. Thus, the serial nature and the compositional geometry should be considered when analyzing the data. Multivariate time series are already challenging, especially if they are higher dimensional, and latent variable models are a popular way to deal with this kind of data. Blind source separation techniques are well-established latent factor models for time series, with many variants covering quite different time series models. Here, several such methods and their assumptions are reviewed, and it is shown how they can be applied to high-dimensional compositional time series. Also, a novel blind source separation method is suggested which is quite flexible regarding the assumptions of the latent time series. The methodology is illustrated using simulations and in an application to light absorbance data from water samples taken from a small stream in Lower Austria.

     

Can sediment supply variations create sequences? Insights from stratigraphic forward modelling

Classic sequence stratigraphy suggests depositional sequences can form due to changes in accommodation and due to changes in sediment supply. Accommodation‐dominated sequences are problematic to define rigorously, but are commonly interpreted from outcrop and subsurface data. In contrast, supply‐dominated sequences are much less commonly identified. We employ numerical stratigraphic forward modelling to compare stratal geometries forced by cyclic changes in relative sea level with stratal geometries forced by sediment discharge and water discharge changes. Our quantitative results suggest that both relative sea‐level oscillations and variations in sediment/water discharge ratio are able to form sequence‐bounding unconformities independently, confirming previous qualitative sequences definitions. In some of the experiments, the two types of sequence share several characteristics, such as an absence of coastal‐plain topset deposits and stratal offlap, something typically interpreted as the result of falling relative sea level. However, the stratal geometries differ when variations in amplitude and frequency of relative sea‐level change, sediment/water discharge ratio, transport diffusion coefficient and initial bathymetry are applied. We propose that the supply‐dominated sequences could be recognised in outcrop or in the subsurface if the observations of stratal offlap and the absence of coastal‐plain topset can be made without any strong evidence of relative sea‐level fall (e.g. descending shoreline trajectory). These quantitative results suggest that both supply‐dominated and accommodation‐dominated sequences are likely to occur in the ancient record, as a consequence of multiple, possibly complex, controls.     

Large-scale laboratory experiment on erosion of sand beds by moving circular vertical jets

This study investigates the topographic deformation due to the erosion of a sand bed impinged by a moving submerged turbulent round jet in a large-scale laboratory. The test conditions represent the case of discharges beneath a vessel while operating in water with a limited clearance such as a shallow navigation channel. The jet moves horizontally and discharges water vertically downward towards the bed. The distance between the jet nozzle and the bed equals six times the jet diameter so the jet flow is in the potential core region. The speed of the jet horizontal motion was varied to examine its effect on the scour profile. The characteristic lengths of the scour profile in the asymptotic state were determined by modifying the empirical formulas in Aderibigbe and Rajaratnam [1996. Erosion of loose beds by submerged circular impinging vertical turbulent jets. Journal of Hydraulic Research 34(1), 19–33]. The maximum scour depth, the scour hole radius, and the ridge height were found to be a function of the ratio of the jet exit to jet translation velocities and were modeled using a hyperbolic function. Empirical equations describing the scour profile were developed and the scour profile was found to be self-similar when normalized by appropriate length scales.