Particle transport from the West African shelves of Liberia and Sierra Leone to the deep sea: A chemical approach

The chemical and mineralogical composition of suspended particle suites has been used to assess off-shelf transport on the West African shelves of Liberia and Sierra Leone. Using the ratios of Si/Al, Fe/Al, Mg/Al and Mn/Al as tracers, it was possible to detect shelf-derived materials in slope waters. In the majority of cases, these inputs could not have been detected using particle mass or light scattering measurements and could only be measured by using the chemical signatures of the particulate matter. At the time of sampling, the suspensate which had been moved seaward over the slope was detected adjacent to submarine canyons and highly turbid areas on the outer shelf. The chemical and mineralogical composition of the suspensates, and sediments in the adjacent eastern Atlantic basin are similar to those found in the water column seaward of the West African continental shelves and yet distinct from the Sahelian dust which is considered the major source of sedimentary material for the tropical and semi-tropical areas of the deep eastern basin. These findings suggest that materials from this shelf area could be a more important input to the deep sea than was previously realised.     

Large-scale cosmic homogeneity from a multifractal analysis of the PSCz catalogue

We investigate the behaviour of galaxy clustering on large scales using the PSC z catalogue. In particular, we ask whether there is any evidence of large-scale fractal behaviour in this catalogue. We find the correlation dimension in this survey varies with scale, consistent with other analyses. For example, our results on small and intermediate scales are consistent those obtained from the QDOT sample, but the larger PSC z sample allows us to extend the analysis out to much larger scales. We find firm evidence that the sample becomes homogeneous at large scales; the correlation dimension of the sample is D ₂=2.992±0.003 for r >30  h ⁻¹ Mpc. This provides strong evidence in favour of a universe that obeys the cosmological principle.     

The rotation of Janus and Epimetheus

Epimetheus, a small moon of Saturn, has a rotational libration (an oscillation about synchronous rotation) of 5.9°±1.2°, placing Epimetheus in the company of Earth’s Moon and Mars’ Phobos as the only natural satellites for which forced rotational libration has been detected. The forced libration is caused by the satellite’s slightly eccentric orbit and non-spherical shape.Detection of a moon’s forced libration allows us to probe its interior by comparing the measured amplitude to that predicted by a shape model assuming constant density. A discrepancy between the two would indicate internal density asymmetries. For Epimetheus, the uncertainties in the shape model are large enough to account for the measured libration amplitude. For Janus, on the other hand, although we cannot rule out synchronous rotation, a permanent offset of several degrees between Janus’ minimum moment of inertia (long axis) and the equilibrium sub-Saturn point may indicate that Janus does have modest internal density asymmetries.The rotation states of Janus and Epimetheus experience a perturbation every 4 years, as the two moons “swap” orbits. The sudden change in the orbital periods produces a free libration about synchronous rotation that is subsequently damped by internal friction. We calculate that this free libration is small in amplitude (<0.1°) and decays quickly (a few weeks, at most), and is thus below the current limits for detection using Cassini images.     

Assimilation of thermal emission spectrometer atmospheric data during the Mars Global Surveyor aerobraking period

The Thermal Emission Spectrometer aboard the Mars Global Surveyor spacecraft has produced an extensive atmospheric data set, beginning during aerobraking and continuing throughout the extended scientific mapping phase. Temperature profiles for the atmosphere below about 40 km, surface temperatures and total dust and water ice opacities, can be retrieved from infrared spectra in nadir viewing mode. This paper describes assimilation of nadir retrievals from the spacecraft aerobraking period, L_S=190°–260°, northern hemisphere autumn to winter, into a Mars general circulation model. The assimilation scheme is able to combine information from temperature and dust optical depth retrievals, making use of a model forecast containing information from the assimilation of earlier observations, to obtain a global, time-dependent analysis. Given sufficient temperature retrievals, the assimilation procedure indicates errors in the a priori dust distribution assumptions even when lacking dust observations; in this case there are relatively cold regions above the poles compared to a model which assumes a horizontally-uniform dust distribution. One major reason for using assimilation techniques is in order to investigate the transient wave behavior on Mars. Whilst the data from the 2-h spacecraft mapping orbit phase is much more suitable for assimilation, even the longer (45–24 h) period aerobraking orbit data contain useful information about the three-dimensional synoptic-scale martian circulation which the assimilation procedure can reconstruct in a consistent way. Assimilations from the period of the Noachis regional dust storm demonstrate that the combined assimilation of temperature and dust retrievals has a beneficial impact on the atmospheric analysis.     

The topography of Iapetus' leading side

We have used Cassini stereo images to study the topography of Iapetus' leading side. A terrain model derived at resolutions of 4-8 km reveals that Iapetus has substantial topography with heights in the range of −10 km to +13 km, much more than observed on the other middle-sized satellites of Saturn so far. Most of the topography is older than 4 Ga [Neukum, G., Wagner, R., Denk, T., Porco, C.C., 2005. Lunar Planet. Sci. XXXVI. Abstract 2034] which implies that Iapetus must have had a thick lithosphere early in its history to support this topography. Models of lithospheric deflection by topographic loads provide an estimate of the required elastic thickness in the range of 50-100 km. Iapetus' prominent equatorial ridge [Porco, C.C., and 34 colleagues, 2005. Science 307, 1237-1242] reaches widths of 70 km and heights of up to 13 km from their base within the modeled area. The morphology of the ridge suggests an endogenous origin rather than a formation by collisional accretion of a ring remnant [Ip, W.-H., 2006. Geophys. Res. Lett. 33, doi:10.1029/2005GL025386. L16203]. The transition from simple to complex central peak craters on Iapetus occurs at diameters of 11±3 km. The central peaks have pronounced conical shapes with flanking slopes of typically 11° and heights that can rise above the surrounding plains. Crater depths seem to be systematically lower on Iapetus than on similarly sized Rhea, which if true, may be related to more pronounced crater-wall slumping (which widens the craters) on Iapetus than on Rhea. There are seven large impact basins with complex morphologies including central peak massifs and terraced walls, the largest one reaches 800 km in diameter and has rim topography of up to 10 km. Generally, no rings are observed with the basins consistent with a thick lithosphere but still thin enough to allow for viscous relaxation of the basin floors, which is inferred from crater depth-to-diameter measurements. In particular, a 400-km basin shows up-domed floor topography which is suggestive of viscous relaxation. A model of complex crater formation with a viscoplastic (Bingham) rheology [Melosh, H.J., 1989. Impact Cratering. Oxford Univ. Press, New York] of the impact-shocked icy material provides an estimate of the effective cohesion/viscosity at . The local distribution of bright and dark material on the surface of Iapetus is largely controlled by topography and consistent with the dark material being a sublimation lag deposit originating from a bright icy substrate mixed with the dark components, but frost deposits are possible as well.     

Global solar dynamo models: Simulations and predictions

Flux-transport type solar dynamos have achieved considerable success in correctly simulating many solar cycle features, and are now being used for prediction of solar cycle timing and amplitude. We first define flux-transport dynamos and demonstrate how they work. The essential added ingredient in this class of models is meridional circulation, which governs the dynamo period and also plays a crucial role in determining the Sun’s memory about its past magnetic fields. We show that flux-transport dynamo models can explain many key features of solar cycles. Then we show that a predictive tool can be built from this class of dynamo that can be used to predict mean solar cycle features by assimilating magnetic field data from previous cycles.     

Search for extinct aluminum‐26 and titanium‐44 in nanodiamonds from the Allende CV3 and Murchison CM2 meteorites

Abstract– We report Mg‐Al and Ca‐Ti isotopic data for meteoritic nanodiamonds separated from the Allende CV3 and Murchison CM2 meteorites. The goal of this study was to search for excesses in ²⁶Mg and ⁴⁴Ca, which can be attributed to the in situ decay of radioactive and now extinct ²⁶Al and ⁴⁴Ti, respectively. Previous work on presolar SiC and graphite had shown that ²⁶Al/²⁷Al and ⁴⁴Ti/⁴⁸Ti ratios in presolar grains can be used to discriminate between different types of stellar sources. Aluminum and Ti concentrations are low in the meteoritic nanodiamonds of this study. Murchison nanodiamonds have higher Al and Ti concentrations than the Allende nanodiamonds. This can be attributed to contamination and the presence of presolar SiC in the Murchison nanodiamond samples. ²⁶Mg/²⁴Mg and ⁴⁴Ca/⁴⁰Ca ratios are close to normal in Allende nanodiamonds with upper limits on the initial ²⁶Al/²⁷Al and ⁴⁴Ti/⁴⁸Ti ratios of approximately 1 × 10^?3. These ratios are factors of 10–1000 and, respectively, 1–1000 lower than those of presolar SiC and graphite grains from supernovae. The ²⁶Al/²⁷Al and ⁴⁴Ti/⁴⁸Ti data for nanodiamonds are compatible with an asymptotic giant branch star or solar system origin, but not with a supernova origin of a major fraction of meteoritic nanodiamonds. The latter possibility cannot be excluded, though, as the diamond separates may contain significant amounts of contaminating Al and Ti, which would lower the inferred ²⁶Al/²⁷Al and ⁴⁴Ti/⁴⁸Ti ratios considerably.