Seasonal patterns of carbon chemistry and isotopes in tufa depositing groundwaters of southwestern Japan

Annually laminated carbonates, known as tufas, commonly develop in limestone areas and typically record seasonal patterns of oxygen- and carbon-isotope compositions. δ¹⁸O values are principally controlled by seasonal changes of water temperature, whereas δ¹³C values are the result of complex reactions among the gaseous, liquid, and solid sources of carbon in the system. We examined the processes that cause the seasonal patterns of δ¹³C in groundwater systems at three tufa-depositing sites in southwestern Japan by applying model calculations to geochemical data. Underground inorganic carbon species are exchanged with gaseous CO₂, which is mainly introduced to the underground hydrological system by natural atmospheric ventilation and by diffusion of soil air. These processes control the seasonal pattern of δ¹³C, which is low in summer and high in winter. Among the three sites we investigated, we identified two extreme cases of the degree of carbon exchange between liquid and gaseous phases. For the case with high radiocarbon composition (Δ¹⁴C) and low pCO₂, there was substantial carbon exchange because of a large contribution of atmospheric CO₂ and a small water mass. For the other extreme case, which was characterized by low Δ¹⁴C and high pCO₂, the contribution of atmospheric CO₂ was small and the water mass was relatively large. Our results suggest that at two of the three sites water residence time within the soil profile was longer than 1 year. Our results also suggested a short residence time (less than 1 year) of water in the soil profile at the site with the smallest water mass, which is consistent with large seasonal amplitude of the springwater temperature variations. The Δ¹⁴C value of tufas is closely related to the hydrological conditions in which they are deposited. If the initial Δ¹⁴C value of a tufa-depositing system is stable, ¹⁴C-chronology can be used to date paleo-tufas.     

Kinetics of Cd sorption, desorption and fixation by calcite: A long-term radiotracer study

Time-dependent sorption and desorption of Cd on calcite was studied over 210 days utilizing ¹⁰⁹Cd as a tracer to distinguish between ‘labile’ and ‘non-labile’ forms of sorbed Cd. Stabilizing the calcite suspensions for 12 months under atmospheric P_CO2 and controlled temperature was necessary to reliably follow Cd dynamics following initial sorption. Results revealed time-dependant Cd sorption and marked desorption hysteresis by calcite under environmentally relevant conditions. Data obtained were fitted to a first-order kinetic model and a concentric shell diffusion model. Both models described the progressive transfer of Cd²⁺ to a less reactive form within calcite and subsequent desorption of Cd subject to different initial contact times. The kinetic model provided a better fit to the combined sorption and desorption data (R² = 0.992). It differentiates between two ‘pools’ of sorbed Cd²⁺ on calcite, ‘labile’ and ‘non-labile’, in which labile sorbed Cd is in immediate equilibrium with the free Cd²⁺ ion activity in solution whereas non-labile Cd is kinetically restricted. For the diffusion model (R² = 0.959), the rate constants describing Cd dynamics in calcite produced a half-life for Cd desorption of ∼175 d, for release to a ‘zero-sink’ solution. Results from this study allow comment on the likely mechanisms occurring at the calcite surface following long-term Cd sorption.     

Cr-spinel/olivine and Cr-spinel/liquid nickel partition coefficients from natural samples

The Nernst partition coefficient of nickel (D^Ni) between Cr-spinel and silicate melt in natural systems has been investigated using mid-ocean ridge basalts (MORB) and other volcanic rocks. The Cr-spinel/olivine D^Ni values in volcanic rocks are between 1.2 and 0.3, indicating that the Cr-spinel/liquid D^Ni values vary from slightly higher to significantly lower than the olivine/liquid D^Ni values in natural systems. The Cr-spinel/liquid D^Ni values from the MORB samples vary between 6 and 11, slightly higher than those from the S-bearing experiments of Satari et al. [Satari P., Brenan J. M., Horn I. and McDonough W. F. (2002) Experimental constraints on the sulfide- and chromite-silicate melt partitioning behavior of rhenium and platinum-group elements. Economic Geology97, 385-398]. The results of the MORB samples and the experiments of Satari et al. (2002) indicate a negative correlation between the Cr-spinel/liquid D^Ni and the X_Cr values in Cr-spinels (Cr cation number on the basis of 3 total cations in the spinel structure). Variations of Cr-spinel/liquid D^Ni values with Cr-spinel compositions can be estimated from an empirical equation based on the results of the MORB samples and the experiments by Satari et al. (2002). The choice of Cr-spinel/liquid D^Ni = 10 for numerical modeling by Righter et al. [Righter K., Leeman W. P. and Hervig R. L. (2006) Partitioning of Ni, Co, and V between spinel-structured oxides and silicate melts: importance of spinel composition. Chemical Geology227, 1-25] is reasonable for basaltic systems. For picritic and komatiitic systems a lower value of ∼5 is more appropriate.     

Association of dissolved aluminum with silica: Connecting molecular structure to surface reactivity using NMR

We studied uptake mechanisms for dissolved Al on amorphous silica by combining bulk-solution chemistry experiments with solid-state Nuclear Magnetic Resonance techniques (²⁷Al magic-angle spinning (MAS) NMR, ²⁷Al{¹H} cross-polarization (CP) MAS NMR and ²⁹Si{¹H} CP-MAS NMR). We find that reaction of Al (1 mM) with amorphous silica consists of at least three reaction pathways; (1) adsorption of Al to surface silanol sites, (2) surface-enhanced precipitation of an aluminum hydroxide, and (3) bulk precipitation of an aluminosilicate phase. From the NMR speciation and water chemistry data, we calculate that 0.20 (±0.04) tetrahedral Al atoms nm⁻² sorb to the silica surface. Once the surface has sorbed roughly half of the total dissolved Al (∼8% site coverage), aluminum hydroxides and aluminosilicates precipitate from solution. These precipitation reactions are dependent upon solution pH and total dissolved silica concentration. We find that the Si:Al stoichiometry of the aluminosilicate precipitate is roughly 1:1 and suggest a chemical formula of NaAlSiO₄ in which Na⁺ acts as the charge compensating cation. For the adsorption of Al, we propose a surface-controlled reaction mechanism where Al sorbs as an inner-sphere coordination complex at the silica surface. Analogous to the hydrolysis of , we suggest that rapid deprotonation by surface hydroxyls followed by dehydration of ligated waters results in four-coordinate (>SiOH)₂Al(OH)₂ sites at the surface of amorphous silica.     

Isotopic studies of leaf water. Part 1: A physically based two-dimensional model for pine needles

Understanding of isotopic variations in leaf water is important for reconstruction of paleoclimate and assessment of global biochemical processes. We report here a study of isotopic distributions within a single needle of two pine species, Pinus resinosa Ait and Pinus strobes L., with the objective of understanding how isotopic compositions of leaf water are controlled by environmental and physiological variables. A 2D model was developed to simulate along-leaf isotopic variations and bulk leaf water isotopic compositions. In addition to variables common to all leaf water isotopic models, this 2D model also takes into account the specific geometry and dimensions of pine needles and the isotopic transport in xylem and mesophyll. The model can successfully simulate oxygen isotopic variations along a single needle and averaged over a leaf (bulk leaf water). The simulations suggest that isotopic composition of the bulk leaf water does not always depend only upon the average transpiration rate, which in turn raises questions about using leaf water isotopic values to estimate transpiration rates. An unsuccessful attempt to simulate along-needle hydrogen isotopic variations suggests that certain unknown biological process(es) may not have been incorporated into our 2D model, and if so, it calls for a reevaluation of all other models for hydrogen isotopic simulations of leaf water since they too lack these processes.Existing leaf water isotopic models are reviewed in this work. In particular, we evaluate the most frequently used model, the stomatal boundary layer model (also referred to as the Craig-Gordon model). We point out that discrepancy between the boundary layer model and the measured bulk leaf water seems to depend upon relative humidity. Using our 2D model, we show that this humidity dependency is a result of an interplay between environmental and physiological conditions: if the transpiration rate of plant leaves decreases with increasing relative humidity, our 2D model can reproduce the pattern of isotopic discrepancy between boundary layer model predictions and observations, enabling us to understand better the reason behind this discrepancy.     

The Fe-C system at 5 GPa and implications for Earth’s core

Earth’s core may contain C, and it has been suggested that C in the core could stabilize the formation of a solid inner core composed of Fe₃C. We experimentally examined the Fe-C system at a pressure of 5 GPa and determined the Fe-C phase diagram at this pressure. In addition, we measured solid metal/liquid metal partition coefficients for 17 trace elements and examined the partitioning behavior between Fe₃C and liquid metal for 14 trace elements. Solid metal/liquid metal partition coefficients are similar to those found in one atmosphere studies, indicating that the effect of pressure to 5 GPa is negligible. All measured Fe₃C/liquid metal partition coefficients investigated are less than one, such that all trace elements prefer the C-rich liquid to Fe₃C. Fe₃C/liquid metal partition coefficients tend to decrease with decreasing atomic radii within a given period. Of particular interest, our 5 GPa Fe-C phase diagram does not show any evidence that the Fe-Fe₃C eutectic composition shifts to lower C contents with increasing pressure, which is central to the previous reasoning that the inner core may be composed of Fe₃C.     

Phthalic acid complexation and the dissolution of forsteritic glass studied via in situ FTIR and X-ray scattering

Multiple Internal Reflection Fourier Transform Infra-Red (MIR-FTIR) spectroscopy was developed and used for in situ flow-through experiments designed to study the process of organic acid promoted silicate dissolution. In tandem with the FTIR analysis, ex situ X-ray scattering was used to perform detailed analyses of the changes in the surface structure and chemistry resulting from the dissolution process. Phthalic acid and forsteritic glass that had been Chemically Vapour Deposited (CVD) onto an internal reflection element were used as reactants, and the MIR-FTIR results showed that phthalic acid may promote dissolution by directly binding to exposed Mg metal ion centers on the solid surface. Integrated infrared absorption intensity as a function of time shows that phthalic acid attachment apparently follows a t^1/2 dependence, indicating that attachment is a diffusive process. The diffusion coefficient of phthalic acid was estimated to be approximately 7 × 10⁻⁶ cm² s⁻¹ in the solution near the interface with the glass. Shifts in the infrared absorption structure of the phthalate complexed with the surface compared to the solute species indicate that phthalate forms a seven-membered ring chelate complex. This bidentate complex efficiently depletes Mg from the glass surface, such that after reaction as much as 95% of the Mg may be removed. Surface depletion in Mg causes adsorbate density to fall after an initial attachment stage for the organic ligand. In addition, the infrared analysis shows that silica in the near surface polymerizes after Mg removal, presumably to maintain charge balance. X-ray reflectivity shows that the dissolution rate of forsteritic glass at pH 4 based on Mg removal in such flow-through experiments was equal to 4 × 10⁻¹² mol cm⁻² s⁻¹ (geometric surface area normalized). Reflectivity also shows how the surface mass density decreases during reaction from 2.64 g cm⁻³ to 2.2 g cm⁻³, consistent with preferential loss of Mg from the surface. Auxiliary batch experiments with forsteritic glass films deposited onto soda glass were also completed to add further constraints to the mechanism of reaction. By combining reflectivity with diffuse scatter measurements it is shown that the primary interface changes little in terms of atomic-scale roughness even after removal of several hundred angstroms of material. These measurements unequivocally show how a dicarboxylic acid bonds to and may chelate the dissolution of a magnesium-bearing silicate. At the molecular level the solid surface retreat may best be described by a depinning model where Mg is preferentially removed and residual silica tetrahedra polymerize and act to episodically “pin” the surface.     

Microbial mass-dependent fractionation of chromium isotopes

Mass-dependent fractionation of Cr isotopes occurs during dissimilatory Cr(VI) reduction by Shewanella oneidensis strain MR-1. Cells suspended in a simple buffer solution, with various concentrations of lactate or formate added as electron donor, reduced 5 or 10 μM Cr(VI) to Cr(III) over days to weeks. In all nine batch experiments, ⁵³Cr/⁵²Cr ratios of the unreacted Cr(VI) increased as reduction proceeded. In eight experiments covering a range of added donor concentrations up to 100 μM, isotopic fractionation factors were nearly invariant, ranging from 1.0040 to 1.0045, with a mean value somewhat larger than that previously reported for abiotic Cr(VI) reduction (1.0034). One experiment containing much greater donor concentration (10 mM lactate) reduced Cr(VI) much faster and exhibited a lesser fractionation factor (1.0018). These results indicate that ⁵³Cr/⁵²Cr measurements should be effective as indicators of Cr(VI) reduction, either bacterial or abiotic. However, variability in the fractionation factor is poorly constrained and should be studied for a variety of microbial and abiotic reduction pathways.     

Limitations of the ferrozine method for quantitative assay of mineral systems for ferrous and total iron

The quantitative assay of clay minerals, soils, and sediments for Fe(II) and total Fe is fundamental to understanding biogeochemical cycles occurring therein. The commonly used ferrozine method was originally designed to assay extracted forms of Fe(II) from non-silicate aqueous systems. It is becoming, however, increasingly the method of choice to report the total reduced state of Fe in soils and sediments. Because Fe in soils and sediments commonly exists in the structural framework of silicates, extraction by HCl, as used in the ferrozine method, fails to dissolve all of the Fe. The phenanthroline (phen) method, on the other hand, was designed to assay silicate minerals for Fe(II) and total Fe and has been proven to be highly reliable. In the present study potential sources of error in the ferrozine method were evaluated by comparing its results to those obtained by the phen method. Both methods were used to analyze clay mineral and soil samples for Fe(II) and total Fe. Results revealed that the conventional ferrozine method under reports total Fe in samples containing Fe in silicates and gives erratic results for Fe(II). The sources of error in the ferrozine method are: (1) HCl fails to dissolve silicates and (2) if the analyte solution contains Fe³⁺, the analysis for Fe²⁺ will be photosensitive, and reported Fe(II) values will likely be greater than the actual amount in solution. Another difficulty with the ferrozine method is that it is tedious and much more labor intensive than the phen method. For these reasons, the phen method is preferred and recommended. Its procedure is simpler, takes less time, and avoids the errors found in the ferrozine method.     

Sulfur in peridotites and gabbros at Lost City (30°N, MAR): Implications for hydrothermal alteration and microbial activity during serpentinization

Variations in sulfur mineralogy and chemistry of serpentinized peridotites and gabbros beneath the Lost City Hydrothermal Field at the southern face of the Atlantis Massif (Mid-Atlantic Ridge, 30°N) were examined to better understand serpentinization and alteration processes and to study fluid fluxes, redox conditions, and the influence of microbial activity in this active, peridotite-hosted hydrothermal system. The serpentinized peridotites are characterized by low total sulfur contents and high bulk δ³⁴S values close to seawater composition. Low concentrations of ³⁴S-enriched sulfide phases and the predominance of sulfate with seawater-like δ³⁴S values indicate oxidation, loss of sulfide minerals and incorporation of seawater sulfate into the serpentinites. The predominance of pyrite in both serpentinites and gabbros indicates relatively high fO₂ conditions during progressive serpentinization and alteration, which likely result from high fluid fluxes during hydrothermal circulation and evolution of the Lost City system from temperatures of ∼250 to 150 °C. Sulfate and sulfide minerals in samples from near the base of hydrothermal carbonate towers at Lost City show δ³⁴S values that reflect the influence of microbial activity. Our study highlights the variations in sulfur chemistry of serpentinized peridotites in different marine environments and the influence of long-lived, moderate temperature peridotite-hosted hydrothermal system and high seawater fluxes on the global sulfur cycle.