The Middle Miocene to Recent Davis Strait Drift Complex: implications for Arctic�CAtlantic water exchange

A large-scale contourite drift complex has been recognised on multi-channel 2D reflection seismic data acquired in the south-eastern Davis Strait and adjacent Labrador Sea slope offshore West Greenland between 63°?C66°N. Based on well-tie data, the drift complex developed from the Middle Miocene to the Recent. It has been mapped in a wide variety of water depths ranging from about 700?m, at a NNW-ESE-elongated crest located above structural highs in the Davis Strait, to more than 2,000?m beyond the slope to the Labrador Sea. The overall drift geometry has been described by subdivision into two first-order seismic units, enabling the generation of time-isochore maps. The reflection patterns demonstrating current-related deposition are illustrated by seismic examples. The time-isochores of the two first-order seismic units show lateral changes in their depocentres: the lower unit is absent in a zone slightly displaced south-westwards of the present-day crest, indicating changes in the prevailing deepwater current system during the Early Pliocene. The observations can be explained by two alternative palaeoceanographic scenarios: (1) either the present-day oceanographic setting with Arctic?CAtlantic water exchange across the Davis Strait was largely established by the mid-Miocene, with only minor adjustments during the Early Pliocene caused by tectonic movements, or (2) it became established during the Early Pliocene as a consequence of enhanced northward flow across the Davis Strait due to lowering of the sill depth.     

Measurement and modeling of bed shear stress under solitary waves

Direct measurements of bed shear stresses (using a shear cell apparatus) generated by non-breaking solitary waves are presented. The measurements were carried out over a smooth bed in laminar and transitional flow regimes (~ 10⁴ < R_e < ~ 10⁵). Measurements were carried out where the wave height to water depth (h/d) ratio varied between 0.12 and 0.68; maximum near bed velocity varied between 0.16 m/s and 0.51 m/s and the maximum total shear stress (sum of skin shear stress and Froude–Krylov force) varied between 0.386 Pa and 2.06 Pa. The total stress is important in determining the stability of submarine sediment and in sheet flow regimes. Analytical modeling was carried out to predict total and skin shear stresses using convolution integration methods forced with the free stream velocity and incorporating a range of eddy viscosity models. Wave friction factors were estimated from skin shear stress at different instances over the wave (viz., time of maximum positive total shear stress, maximum skin shear stress and at the time of maximum velocity) using both the maximum velocity and the instantaneous velocity at that phase of the wave cycle. Similarly, force coefficients obtained from total stress were estimated at time of maximum positive and negative total stress and at maximum velocity. Maximum positive total shear stress was approximately 1.5 times larger than minimum negative total stress. Modeled and measured positive bed shear stresses are well correlated using the best convolution model, but the model underestimates the data by about 4%. Friction factors are dependent on the choice of normalizing using the maximum velocity, as is conventional, or the instantaneous velocity. These differ because the stress is not in phase with the velocity in general. Friction factors are consistent with previous data for monochromatic waves, and vary inversely with the square-root of the Reynolds number. The total shear stress leads the free stream fluid velocity by approximately 50°, whereas the skin friction shear stress leads by about 30°, which is similar to that reported by earlier researchers.     

Solar Flare Prediction Using Advanced Feature Extraction, Machine Learning, and Feature Selection

Novel machine-learning and feature-selection algorithms have been developed to study: i) the flare-prediction-capability of magnetic feature (MF) properties generated by the recently developed Solar Monitor Active Region Tracker (SMART); ii) SMART’s MF properties that are most significantly related to flare occurrence. Spatiotemporal association algorithms are developed to associate MFs with flares from April 1996 to December 2010 in order to differentiate flaring and non-flaring MFs and enable the application of machine-learning and feature-selection algorithms. A machine-learning algorithm is applied to the associated datasets to determine the flare-prediction-capability of all 21 SMART MF properties. The prediction performance is assessed using standard forecast-verification measures and compared with the prediction measures of one of the standard technologies for flare-prediction that is also based on machine-learning: Automated Solar Activity Prediction (ASAP). The comparison shows that the combination of SMART MFs with machine-learning has the potential to achieve more accurate flare-prediction than ASAP. Feature-selection algorithms are then applied to determine the MF properties that are most related to flare occurrence. It is found that a reduced set of six MF properties can achieve a similar degree of prediction accuracy as the full set of 21 SMART MF properties.     

Lunar atmospheric H2 detections by the LAMP UV spectrograph on the Lunar Reconnaissance Orbiter

We report on the detection of H₂ as seen in our analysis of twilight observations of the lunar atmosphere observed by the LAMP instrument aboard NASA’s Lunar Reconnaissance Orbiter. Using a large amount of data collected on the lunar atmosphere between September 2009 and March 2013, we have detected and identified, the presence of H₂ in the native lunar atmosphere, for the first time. We derive a surface density for H₂ of 1.2 ± 0.4 × 10³ cm⁻³ at 120 K. This is about 10 times smaller than originally predicted, and several times smaller than previous upper limits from the Apollo era data.     

It starts at home? Climate policies targeting household consumption and behavioral decisions are key to low-carbon futures

Through their consumption behavior, households are responsible for 72% of global greenhouse gas emissions. Thus, they are key actors in reaching the 1.5 °C goal under the Paris Agreement. However, the possible contribution and position of households in climate policies is neither well understood, nor do households receive sufficiently high priority in current climate policy strategies. This paper investigates how behavioral change can achieve a substantial reduction in greenhouse gas emissions in European high-income countries. It uses theoretical thinking and some core results from the HOPE research project, which investigated household preferences for reducing emissions in four European cities in France, Germany, Norway and Sweden. The paper makes five major points: First, car and plane mobility, meat and dairy consumption, as well as heating are the most dominant components of household footprints. Second, household living situations (demographics, size of home) greatly influence the household potential to reduce their footprint, even more than country or city location. Third, household decisions can be sequential and temporally dynamic, shifting through different phases such as childhood, adulthood, and illness. Fourth, short term voluntary efforts will not be sufficient by themselves to reach the drastic reductions needed to achieve the 1.5 °C goal; instead, households need a regulatory framework supporting their behavioral changes. Fifth, there is a mismatch between the roles and responsibilities conveyed by current climate policies and household perceptions of responsibility. We then conclude with further recommendations for research and policy.     

Neoarchean suprasubduction zone arc magmatism in southern India: Geochemistry,zircon U-Pb geochronology and Hf isotopes of the Sittampundi Anorthosite Complex

The Sittampundi Anorthosite Complex (SAC) in southern India is one of the well exposed Archean layered anorthosite-gabbro-ultramafic rock associations. Here we present high precision geochemical data for the various units of SAC, coupled with zircon U-Pb geochronology and Hf isotopic data for the anorthosite. The zircon ages define two populations, the older yield a concordia age of 2541 ± 13 Ma, which is interpreted as the best estimate of the magmatic crystallization age for the Sittampundi anorthosite. A high-grade metamorphic event at 2461 ± 15 Ma is suggested by the upper intercept age of the younger zircon population. A Neoproterozoic event at 715 ± 180 Ma resulted in Pb loss from some of the metamorphic zircons. The magmatic age of the anorthosite correlates well with the timing of crystallization of the arc-related ~ 2530 Ma magmatic charnockites in the adjacent Salem Block, while the metamorphic age is synchronous with the regional metamorphic event. The geochemical data suggest that the rocks were derived from a depleted mantle source. Sub-arc mantle metasomatism of slab derived fluids and subsequent partial melting produced hydrous, aluminous basalt magma. The magma fractionated at depth to produce a variety of high-alumina basalt compositions, from which the anorthositic complex with its chromite-rich and amphibole-rich layers formed as cumulates within the magma chamber of a supra-subduction zone arc. The coherent initial¹⁷⁶Hf/¹⁷⁷Hf ratios and positive εHf values (1.7 – 4.5) of the magmatic zircons in the anorthosite are consistent with derivation of a rather homogeneous juvenile parent magma from a depleted mantle source. Our study further confirms that the southern part of the Dharwar Craton was an active convergent margin during the Neoarchean with the generation and emplacement of suprasubduction zone arc magmas which played a significant role in continental growth.     

A new Ordovician eurypterid (Arthropoda: Chelicerata) from southeast Turkey: Evidence for a cryptic Ordovician record of Eurypterida

A new species of eurypterid, Paraeurypterus anatoliensis gen. et sp. nov., is described from the Upper Ordovician (Katian) ?ort Tepe Formation of southeast Turkey. The single specimen, preserving the carapace, mesosoma and fragments of appendages, appears morphologically intermediate between the eurypteroid families Dolichopteridae and Eurypteridae. P. anatoliensis retains the plesiomorphic conditions of crescentic eyes with enlarged palpebral lobes and a quadrate carapace with ornamentation consisting of small pustules but also displaying the derived characteristics of genal facets and a row of large acicular scales across the posterior of each tergite. Phylogenetic analysis incorporating each of the major eurypterine clades and all Eurypterina having a three-segmented genital operculum (the triploperculate condition) resolves eurypteroids to be an unnatural group, with Dolichopteridae and Eurypteridae forming part of a grade leading to diploperculate Eurypterina. P. anatoliensis is intermediate between the two eurypteroid families, as is ‘Eurypterus’ minor from the Pentland Hills of Scotland, which is shown to be a distinct genus and assigned to Pentlandopterus gen. nov. Using the phylogenetic topology to infer ghost ranges for each of the major eurypterid clades reveals that the majority of eurypterid superfamilies must have originated by the Katian, indicating a largely unsampled record of Ordovician eurypterids. The occurrence of poor dispersers such as Paraeurypterus in the Ordovician of Gondwana is puzzling, and it has been suggested that they dispersed to the continent during periods of sea level lowstand in the Sandbian and Hirnantian, however this does not explain the lack of Ordovician species in North America and Europe, given the well-sampled nature of these continents, and an alternative is proposed whereby eurypterids originated in Gondwana and radiated out to Laurentia and Baltica in the late Ordovician and early Silurian, thus explaining their sudden appearance in the European and North American rock record.     

CFD modeling of high-pressurized CO2 released from onshore pipeline leakages

Safe pipeline transportation of carbon dioxide is a critical issue in the developing field of carbon capture and storage technology. Inadequate fluid thermo- and regimes for on- and offshore transport through high-pressurized pipelines can induce pipe material obsolescence or even pipeline rupture. In such cases, CO₂ (Carbon dioxide) will be released and dispersed in the ambient medium. The dispersion is influenced by the total amount of released fluid, jet pressure and direction, the released concentrations, leakage hole size, ambient material properties and is also affected by the dynamical conditions of the environmental medium. The goal of this study is the hydrodynamical characterization of carbon dioxide jet expansion and dispersion in the ambient atmosphere in case of onshore pipeline accidental leaks. Numerical simulations were carried out by means of a 3D turbulent CFD (computational fluid dynamics) code which includes multi-component flow treatment. The influence of the jet release pressure and size of the leakage hole on harmful CO₂ concentration distances will be analyzed.     

Évolution géodynamique messino-pliocène en Languedoc central : le paléo-réseau hydrographique de l’Orb et de l’Hérault (Sud de la France)

Résumé

En Languedoc central, la cartographie des sédiments formés lors de la crise messinienne et de ceux de la séquence pliocène, ainsi que les données patées paléontologiques nouvelles (Aigues-Vives et Servian) permettent de proposer une reconstitution du tracé messimeli des rivières actuelles (Orb et Hérault) transformées en rias à la suite du relèvement eustatique pliocène. L’Hérault messinien se singularise par une incision beaucoup plus faible que celle des autres rivères. En effet, la nature karstique de l’arinère-pays immédiat permet un enfouissement des eaux météoriques au profit d’aquifères profonds sous-jacents au drainage aérien du réseau hydrographique messinien. Le Languedoc central illustre, entre Roussillon et Rhône, le modèle géodynamique messino-pliocène de Clauzon. © Elsevier, Paris     

Seawater nutrient and carbonate ion concentrations recorded as P/Ca, Ba/Ca, and U/Ca in the deep-sea coral Desmophyllum dianthus

As paleoceanographic archives, deep sea coral skeletons offer the potential for high temporal resolution and precise absolute dating, but have not been fully investigated for geochemical reconstructions of past ocean conditions. Here we assess the utility of skeletal P/Ca, Ba/Ca and U/Ca in the deep sea coral D. dianthus as proxies of dissolved phosphate (remineralized at shallow depths), dissolved barium (trace element with silicate-type distribution) and carbonate ion concentrations, respectively. Measurements of these proxies in globally distributed D. dianthus specimens show clear dependence on corresponding seawater properties. Linear regression fits of mean coral Element/Ca ratios against seawater properties yield the equations: P/Ca_coral (μmol/mol) = (0.6 ± 0.1) P/Ca_sw(μmol/mol) - (23 ± 18), R² = 0.6, n = 16 and Ba/Ca_coral(μmol/mol) = (1.4 ± 0.3) Ba/Ca_sw(μmol/mol) + (0 ± 2), R² = 0.6, n = 17; no significant relationship is observed between the residuals of each regression and seawater temperature, salinity, pressure, pH or carbonate ion concentrations, suggesting that these variables were not significant secondary dependencies of these proxies. Four D. dianthus specimens growing at locations with Ω_arag ? 0.6 displayed markedly depleted P/Ca compared to the regression based on the remaining samples, a behavior attributed to an undersaturation effect. These corals were excluded from the calibration. Coral U/Ca correlates with seawater carbonate ion: U/Ca_coral(μmol/mol) = (−0.016 ± 0.003) (μmol/kg) + (3.2 ± 0.3), R² = 0.6, n = 17. The residuals of the U/Ca calibration are not significantly related to temperature, salinity, or pressure. Scatter about the linear calibration lines is attributed to imperfect spatial-temporal matches between the selected globally distributed specimens and available water column chemical data, and potentially to unresolved additional effects. The uncertainties of these initial proxy calibration regressions predict that dissolved phosphate could be reconstructed to ±0.4 μmol/kg (for 1.3-1.9 μmol/kg phosphate), and dissolved Ba to ±19 nmol/kg (for 41-82 nmol/kg Ba_sw). Carbonate ion concentration derived from U/Ca has an uncertainty of ±31μmol/kg (for ). The effect of microskeletal variability on P/Ca, Ba/Ca, and U/Ca was also assessed, with emphasis on centers of calcification, Fe-Mn phases, and external contaminants. Overall, the results show strong potential for reconstructing aspects of water mass mixing and biogeochemical processes in intermediate and deep waters using fossil deep-sea corals.