Reliable estimation of orbit errors in spaceborne SAR interferometry

An approach to improve orbital state vectors by orbit error estimates derived from residual phase patterns in synthetic aperture radar interferograms is presented. For individual interferograms, an error representation by two parameters is motivated: the baseline error in cross-range and the rate of change of the baseline error in range. For their estimation, two alternatives are proposed: a least squares approach that requires prior unwrapping and a less reliable gridsearch method handling the wrapped phase. In both cases, reliability is enhanced by mutual control of error estimates in an overdetermined network of linearly dependent interferometric combinations of images. Thus, systematic biases, e.g., due to unwrapping errors, can be detected and iteratively eliminated. Regularising the solution by a minimum-norm condition results in quasi-absolute orbit errors that refer to particular images. For the 31 images of a sample ENVISAT dataset, orbit corrections with a mutual consistency on the millimetre level have been inferred from 163 interferograms. The method itself qualifies by reliability and rigorous geometric modelling of the orbital error signal but does not consider interfering large scale deformation effects. However, a separation may be feasible in a combined processing with persistent scatterer approaches or by temporal filtering of the estimates.     

Mitigating the impact of ionospheric cycle slips in GNSS observations

Processing of data from global navigation satellite systems (GNSS), such as GPS, GLONASS and Galileo, can be considerably impeded by disturbances in the ionosphere. Cycle-slip detection and correction thus becomes a crucial component of robust software. Still, dealing with ionospheric cycle slips is not trivial due to scintillation effects in both the phase and the amplitude of the signals. In this contribution, a geometry-based approach with rigorous handling of the ionosphere is presented. A detailed analysis of the cycle-slip correction process is also tackled by examining its dependence on phase and code noise, non-dispersive effects and, of course, the ionosphere. The importance of stochastic modeling in validating the integer cycle-slip candidates is emphasized and illustrated through simulations. By examining the relationship between ionospheric bias and ionospheric constraint, it is shown that there is a limit in the magnitude of ionospheric delay variation that can be handled by the cycle-slip correction process. Those concepts are applied to GNSS data collected by stations in northern Canada, and show that enhanced cycle-slip detection can lead to decimeter-level improvements in the accuracy of kinematic PPP solutions with a 30-s sampling interval. Cycle-slip correction associated with ionospheric delay variations exceeding 50 cm is also demonstrated, although there are risks with such a procedure and these are pointed out.     

Validation of Chlorophyll-a Algorithms in the Coastal Waters of Bay of Bengal Initial Validation Results from OCM-2

In this paper we report chlorophyll measurements made during an ocean colour validation cruise in April 2011 of the research vessel, Sagar Paschimi in the coastal waters of Northern Bay of Bengal. The chlorophyll-a concentration in these waters range from 0.2 to 4.0 mg/m³. Chlorophyll-a concentration from OCM-2 was estimated using the global ocean colour algorithms namely, OC2, OC3, OC4 and Chl-a algorithms respectively. OCM data was processed using the global SeaWiFS Data Analysis System (SeaDAS) in which all the above mentioned algorithms are embedded for estimating the chlorophyll-a concentration. A comparative study was made between and in-situ and satellite derived chlorophyll-a concentration. Although the matchups between in-situ and satellite data from OCM-2 were sparse, it indicates that direct application of the standard SeaWiFS algorithm-the OC4-V4 algorithm—in the coastal waters of the Bay of Bengal will underestimate chlorophyll-a by up to 30%. The results show a good correlation with an R value of 0.61 using OC2 algorithm. However, all the other global algorithms over estimate the chlorophyll-a concentration even in low chlorophyll concentration range. The comparison between in-situ and all the existing chlorophyll algorithms shows the efficiency of these algorithms for quantification of chlorophyll in coastal waters and hence the need to develop regional algorithms and fluorescence based algorithms for better quantification.     

Crop Residue Discrimination Using Ground-Based Hyperspectral Data

Crop residue has become an increasingly important factor in agriculture management. It assists in the reduction of soil erosion and is an important source of soil organic carbon (soil carbon sequestration). In recent past, remote sensing, especially narrowband, data have been explored for crop residue assessment. In this context, a study was carried out to identify different narrow-bands and evaluate the performance of SWIR region based spectral indices for crop residue discrimination. Ground based hyperspectral data collected for wheat crop residue was analyzed using Stepwise Discriminant Analysis (SDA) technique to select significant bands for discrimination. Out of the seven best bands selected to discriminate between matured crop, straw heap, combine-harvested field with stubbles and soil, four bands were from SWIR (1980, 2030, 2200, 2440 nm) region. Six spectral indices were computed, namely CAI, LCA, SINDRI, NDSVI, NDI5 and hSINDRI for crop residue discrimination. LCA and CAI showed to be best (F?>?115) in discriminating above classes, while LCA and SINDRI were best (F?>?100) among all indices in discriminating crop residue under different harvesting methods. Comparison of different spectral resolution (from 1 nm to 150 nm) showed that for crop residue discrimination a resolution of 100 nm at 2100–2300 m region would be sufficient to discriminate crop residue from other co-existing classes.     

Generation and validation of DEM using SAR interferometry and differential GPS supported by multispectral optical data

Digital elevation model (DEM) and the derived terrain parameters e.g. contour, slope, aspect, drainage pattern, etc are required for natural resources management, infrastructure planning and disaster management. The present paper aims at generating DEM from ERS tandem pair using interferometric technique supported by differential GPS measurements (DGPS) and multispectral optical data. Validation of DEM has been carried out by DGPS measurements. Ground Control Points (GCP) established by DGPS measurements have been used to georeference the IRS-1D optical data that has finally been co-registered with SAR amplitude image. Optical data, co-registered with ERS - I SAR data has helped in locating the GCP’s and check points, precisely, for refinement of DEM and its validation.     

Distribution analysis of salt affected soils under canal and non-canal command area in a part of Etah district,U. P., using remote sensing technique

A World Bank-aided project on sodic land reclamation in Uttar Pradesh is being executed by U.P. Bhumi Sudhar Nigam, Lucknow, and Remote Sensing Applications Centre, U.P., Lucknow has the responsibility of sodic land mapping for the execution of land reclamation programme at the cadastral level. Sodic lands are mainly concentrated in the Gangetic alluvial plains but the problem of sodicity is particularly acute in the canal-irrigated areas. A study of the distribution pattern of sodic lands in canal and noncanal command areas in a reclamation site (covering 60 villages out of which sodic lands were mapped in 51 villages) of Etah district in Uttar Pradesh, indicates that 18.39 per cent area of the canal command villages was barren sodic which was 13.41 per cent of the total geographical area of the site (15417 ha), however, 11.69 per cent area was recorded to be barren sodic in the non-canal command villages which was only 3.16 per cent of the geographical area of the site. The results of soil chemical analysis indicate that barren sodic lands of canal command area are saline-sodic with higher concentration of soluble salts (pH₂ >8.5, EC₂ >4 dSm⁻¹), however, those of non-canal command area are sodic (pH₂ >8.5, EC₂ <4 dSm⁻¹). The post-monsoon ground level in the canal-irrigated areas was in the critical and semicritical zone (< 3.0 mbgl) whereas it was well below the semi-critical zone in the non-canal command area, which indicates that the high ground water level is a major factor to higher the area under sodicity.     

The design and the development of a hyperspectral and multispectral airborne mapping system

Flexible and cost-effective tools for rapid image acquisition and natural resource mapping are needed by land managers. This paper describes the hardware and software architecture of a low-cost system that can be deployed on a light aircraft for rapid data acquisition. The Hyperspectral and Multispectral Cameras for Airborne Mapping (HAMCAM) was designed and developed in the Geospatial Laboratory for Environmental Dynamics at the University of Idaho as a student-learning tool, and to enhance the existing curriculum currently offered. The system integrates a hyperspectral sensor with four multispectral cameras, an Inertial Navigation System (INS), a Wide Area Augmentation System (WAAS)-capable Global Positioning System (GPS), a data acquisition computer, and custom software for running the sensors in a variety of different modes. The outputs include very high resolution imagery obtained in four adjustable visible and near-infrared bands from the multispectral imager. The hyperspectral sensor acquires 240 spectral bands along 2.7 nm intervals within the 445–900 nm range. The INS provides aircraft pitch, roll and yaw information for rapid geo-registration of the imagery. This paper will discuss the challenges associated with the development of the system and the integration of components and software for implementation of this system for natural resource management applications. In addition, sample imagery acquired by the sensor will be presented.     

An evaluation of some systematic error sources affecting terrestrial gravity anomalies

Terrestrial free-air gravity anomalies form a most essential data source in the framework of gravity field determination. Gravity anomalies depend on the datums of the gravity, vertical, and horizontal networks as well as on the definition of a normal gravity field; thus gravity anomaly data are affected in a systematic way by inconsistencies of the local datums with respect to a global datum, by the use of a simplified free-air reduction procedure and of different kinds of height system. These systematic errors in free-air gravity anomaly data cause systematic effects in gravity field related quantities like e.g. absolute and relative geoidal heights or height anomalies calculated from gravity anomaly data. In detail it is shown that the effects of horizontal datum inconsistencies have been underestimated in the past. The corresponding systematic errors in gravity anomalies are maximum in mid-latitudes and can be as large as the errors induced by gravity and vertical datum and height system inconsistencies. As an example the situation in Australia is evaluated in more detail: The deviations between the national Australian horizontal datum and a global datum produce a systematic error in the free-air gravity anomalies of about −0.10 mgal which value is nearly constant over the continent     

Analysis of sorghum yield dependence on crop growth characteristics using noaa-avhrr data

Growth profiles of 1987-88 rabi sorghum crop cultivated in spatially extensive sites in six tehsils of Solapur and Ahmadnagar districts in Maharashtra have been generated using multidate NOAA AVHRR data based on crop growth equation suggested by Badhwar (1980). The sensitive parameters for sorghum yield modelling have been identified. The correlation of final grain yield with growth parameters shows that yield relationship is stronger when logarithmic senescence rate and timeintegrated logarithmic senescence rate are considered as the parameters instead of its value on any day during 30 days senescence period after attaining maximum vegetative cover.     

Integrated approach for demarcating the fracture zone for well site location : A case study near Gumla and Lohardaga,Bihar

In recent years satellite remote sensing techniques have greatly aided identification of fractures/joints/faults in connection with groundwater exploration. However, due to some constraints in filtering out the type of fracture i.e. shear fracture, tensional fracture, mineralised fracture etc. as to their “open or closed” nature from groundwater aspects, there is need of adding geophysical survey, particularly resistivity survey to further enhance the accuracy, and hence minimise drilling failures. The area under study is a part of Ranchi plateau and lithologically comprising of granite-gneiss. The present paper lays stress on an integrated approach for localising well sites through satellite data analysis and resistivity profiling along with vertical electrical sounding which is based on fracture patterns. With this combined effort i.e. firstly considering the surfacial features like drainage, geomorpho-logy, lithology and lineaments, and secondly taking into account geophysical survey aspects, i.e. depth and thickness of fracture zone, lateral extent, different layer parameter, etc., fairly accurate results are achieved. In the presnt study this type of an integrated survey has been carried out in Lohardaga and Gumla districts in Bihar, the results of which are highlighted in the paper.