A late Pleistocene record of aeolian sedimentation in Blanche Cave, Naracoorte, South Australia

We provide geochemical analyses and grain size data for a clearly layered, 80 cm thick sedimentary deposit close to a roof collapse in Blanche Cave near Naracoorte in SE South Australia. This deposit contains aeolian material deposited between 40 ka and 14 ka cal BP and which yields airborne sediments spanning the Last Glacial Maximum, a period of time with little information for the Australian continent. The deposit also contains abundant vertebrate fossil material derived from owl pellets, accumulation and pitfall entrapment. Below the studied profile, large vertebrate remains are found but are not discussed here. No Holocene sedimentation occurred at the site examined in the cave, and the top of the sequence is capped with a layer that has been anthropologically disturbed and contains exotic Pinus pollen. Chronologies of the deposit were obtained using two dating techniques: single stage accelerator mass spectrometer (SSAMS) ¹⁴C analysis of 23 charcoal samples and optically stimulated luminescence (OSL) dating of quartz from 6 sediment samples. The ¹⁴C chronology is preferred to describe the history of the deposits since the OSL chronology, which consistently overestimates the associated radiocarbon dates, may be inaccurate due to complexities in calculating dose rates, and may in addition represent the timing of sediment deposition through the cave opening rather than sediment transport to the deposit site. Morphological analysis of single quartz grains and grain size analysis indicate different provenance that is confirmed through the geochemical analyses of bulk sediment. Major elements were measured by X-ray Fluorescence (XRF), trace and rare earth elements by Laser Ablation Inductively Coupled Plasma Mass Spectrometry (LA ICP-MS), and Neodymium isotopic ratios were obtained using a Thermal Ionisation Mass Spectrometer (TIMS).Our results indicate that the aeolian material deposited in Blanche Cave over the 40–14 ka cal BP period originated from different sources across South Australia, although Nd isotopes clearly indicate a close association with sediments of the Kanmantoo Group outcropping along the eastern portion of the Mount Lofty Ranges and the Padthaway Ridge further south, both being located to the NW and NNW of the cave. During the latter part of Marine Isotope Stage 3, conditions were wetter and windblown sediment came from the coastal region just north and south of the Coorong Lagoon, with winds originating from the north-northwest. At that time, woody taxa appear to have vegetated the landscape. During the drier phases, especially the Last Glacial Maximum, sediment came from further inland, thus suggesting a different predominant wind direction, more from the northwest. The deglaciation saw material originating from a more northerly direction.     

Mass occurrence of benthic coccoid cyanobacteria and their role in the production of Neoarchean carbonates of South Africa

The sparse Archean fossil record is based almost entirely on carbonaceous remnants of microorganisms cellularly preserved due to their early post-mortem silicification. Hitherto as an exception, sedimentary carbonate rocks from the Neoarchean Nauga Formation of South Africa contain calcified microbial mats composed of microbiota closely resembling modern benthic colonial cyanobacteria (Chroococcales and Pleurocapsales). Their remains, visible under the scanning electron microscope (SEM) after etching of polished rock samples, comprise capsular envelopes, mucilage sheaths, and groups of cells mineralized by calcium carbonate with an admixture of Al–K–Mg–Fe silicates. The capsular organization of the mucilaginous sheaths surrounding individual cells and cell clusters forming colonies and the mode of mineralization are the characteristic common features of the Neoarchean microbiota described and their modern analogues. The new findings indicate massive production of calcium carbonates by benthic coccoid cyanobacteria in the Neoarchean, and offer a solution to the problem of the origin of Archean carbonate platforms, stromatolites and microbial reefs.     

A micromorphological and mineralogical study of site formation processes at the late Pleistocene site of Obi‐Rakhmat,Uzbekistan

Site formation processes at the Late Pleistocene rockshelter deposit of Obi‐Rakhmat were reconstructed through soil micromorphology and Fourier transform infrared spectroscopy (FTIR). The entire sequence has undergone limited diagenesis and is well preserved. The base of the stratified sequence represents a karstic setting with intermittent, low‐energy deposition of autochthonous gravitational debris and anthropogenic material in a wet, muddy environment. These sediments were post‐depositionally affected by episodic waterlogging. The bulk of the sequence overlying the karstic layers comprises a continuous series of primary freshwater spring deposits containing reworked anthropogenic material that was buried penecontemporaneously with calcium carbonate deposition. The top of the sequence is weakly cryoturbated, indicating a periodically cold, wet environment. No alluvial elements that could suggest sediment inputs from the nearby river terraces were documented. A single exogenous layer was identified, representing an episode of colluviation from directly above the rockshelter preceding a major roofspall event. The basal part of the sequence contains slightly reworked anthropogenic remnants of intense activities, including combustion. The anthropogenic elements present in the spring deposits show higher degrees of reworking, suggesting within‐layer translocation. The development of spring activity at the site did not cause humans to abandon the rockshelter; they continued to carry out their activities throughout a changing local environment. © 2009 Wiley Periodicals, Inc.     

Volcanic eruptions in the Longgang volcanic field,northeastern China,during the past 15,000 years

The Longgang volcanic field, located in northeastern China, is volcanically active with a number of eruptions during the Quaternary but the chronology of the eruptions is poorly defined. Some tephra layers are well preserved in the annually laminated sediments of maar lakes in the region, and facilitate the construction of a much improved chronological framework for the volcanic history of the area. The results of our investigations reveal that three basaltic explosive eruptions occurred at AD 460, 11460 cal yr BP and 14000 cal yr BP, respectively. The largest explosive basaltic eruption (AD 460) produced a thick black scoria layer in the Longgang volcanic field, including lakes. The tephra distribution and chronological data suggest that this eruption is likely to be from the Jinlongdingzi volcano. Two basaltic flood eruptions occurred at Jinlongdingzi. The earlier basaltic eruption produced a lava flow that spread over a forest and encased standing trees. Two radiocarbon ages obtained from charcoal samples collected from the burned remains of these trees are 1828–1989 cal yr BP and 2164–2359 cal yr BP. In the most recent stage of volcanism, the lava flow extended only ca. 2 km, and flowed into Lake Dalongwan. From the present status of the forest ecosystem, which has not yet reached the fully mature successional stage, we estimate that this lava is very young (ca. a few hundreds years old). Jinlongdingzi is a potentially dangerous volcano. Monitoring and assessment of the potential hazards in the Longgang volcanic field should be carried out in the future.     

A Simulation of Historic Hydrology and Salinity in Everglades National Park: Coupling Paleoecologic Assemblage Data with Regression Models

Restoration of Florida’s Everglades requires scientifically supportable hydrologic targets. This study establishes a restoration baseline by developing a method to simulate hydrologic and salinity conditions prior to anthropogenic changes. The method couples paleoecologic data on long-term historic ecosystem conditions with statistical models derived from observed meteorologic and hydrologic data that provide seasonal and annual variation. Results indicate that pre-drainage freshwater levels and hydroperiods in major sloughs of the Everglades were about 0.15 m higher and two to four times greater, respectively, on average compared to today’s values. Pre-drainage freshwater delivered to the wetlands and estuaries is estimated to be 2.5 to four times greater than the modern-day flow, and the largest deficit is during the dry season. In Florida Bay, salinity has increased between 5.3 and 20.1 with the largest differences in the areas near freshwater outflow points. These results suggest that additional freshwater flows to the Everglades are needed for restoration of the freshwater marshes of the Everglades and estuarine environment of Florida Bay, particularly near the end of the dry season.     

A review of the pre-Permian geology of the Variscan French Massif Central

The Massif Central, like the southern part of the Massif Armoricain, belongs to the north Gondwana margin. The Massif Central consists of a stack of nappes resulting from six main tectonic-metamorphic events. The first, D₀, is coeval with a Late Silurian (ca 415 Ma) high-pressure (HP) (or ultra high-pressure) metamorphism for which the associated structures are poorly documented. The Early Devonian D₁ event, responsible for top-to-the-southwest nappe displacement, is coeval with migmatization and the exhumation of HP rocks around 385–380 Ma. In the northern part of the Massif Central, metamorphic rocks with retrogressed eclogites are covered by Late Devonian undeformed sedimentary rocks. The Late Devonian-Early Carboniferous D₂ event involves top-to-the-northwest shearing, coeval with an intermediate pressure-temperature metamorphism dated around 360–350 Ma. The Visean D₃ event is a top-to-the-south ductile shearing, which is widespread in the southern Massif Central. Coevally, in the northern Massif Central, the D₃ event corresponds to the onset of synorogenic extension. The next two events, D₄ and D₅, of Early and Late Carboniferous age, correspond to the syn- and late orogenic extensional tectonic regimes, respectively. The former is controlled by NW–SE stretching whereas the latter is accommodated by NNE–SSW stretching. These structural and metamorphic events are reconsidered in a geodynamic evolution model. The possibilities of one or two cycles involving microcontinent drifting, rewelding and collision are discussed.     

Chad Basin: Paleoenvironments of the Sahara since the Late Miocene

Since the mid 1990s, the Mission paléoanthropologique francotchadienne (MPFT) conducts yearly paleontological field investigations of the Miocene-Pliocene of the Chad Basin. This article synthesizes some of the results of the MPFT, with focus on the Chad Basin development during the Neogene. We propose an overview of the depositional paleoenvironments of this part of Africa at different scales of time and space, based on a multidisciplinary approach (sedimentary geology, geomorphology, geophysic, numerical simulations and geochronology). The Miocene-Pliocene paleoenvironments are examined through the sedimentary archives of the early hominids levels and the Holocene Lake Mega-Chad episode illustrates the last major paleoenvironmental change in this area. The sedimentary record of the Chad Basin since the Late Miocene can be schematized as the result of recurrent interactions from lake to desert environments.     

Vegetation Dynamics in Rhode Island Salt Marshes During a Period of Accelerating Sea Level Rise and Extreme Sea Level Events

Sea level rise is a major stressor on many salt marshes, and its impacts include creek widening, ponding, vegetation dieback, and drowning. Marsh vegetation changes have been associated with sea level rise across southern New England, but most of these studies pre-date the current period of rapidly accelerating sea level rise coupled with episodic events of extreme increases in water levels. Here, we combine data from two salt marsh monitoring and assessment programs in Rhode Island that were designed to assess marsh responses to sea level rise and use these data to document temporal and spatial patterns in marsh vegetation during the current period of extreme water level increases. Vegetation monitoring at two Narragansett Bay salt marshes confirms the ongoing decline of the salt meadow species Spartina patens during this period as it becomes replaced by Spartina alterniflora. Bare ground resulting from vegetation dieback was significantly related to mean high water levels and led to the rapid conversion of mixed Spartina assemblages to S. alterniflora monocultures. A broader spatial assessment of RI marshes shows that S. alterniflora dominance increases at lower elevation marshes toward the mouth of Narraganset Bay. Our data provide additional evidence that S. patens continues to decline in southern New England marshes and show that losses can accelerate during periods of extreme high water levels. Unless adaptive management actions are taken, we predict that marshes throughout RI will continue to lose salt meadow habitat and eventually resemble lower elevation marshes that are already dominated by S. alterniflora monocultures.     

Modeling of shear failure in fractured reservoirs with a porous matrix

A finite volume-based numerical modeling framework using a hierarchical fracture representation (HFR) has been developed to compute flow-induced shear failure. To accurately capture the mechanics near fracture manifolds, discontinuous basis functions are employed which ensure continuity of the displacement gradient across fractures. With these special basis functions, traction and compressive forces on the fracture segment can be calculated without any additional constraints, which is extremely useful for estimating the irreversible displacement along the fracture (slip) based on a constitutive friction law. The method is further extended to include slip-dependent hydraulic aperture change and grid convergent results are obtained. Further, the change in hydraulic aperture is modeled using an asymptotic representation which respects the experimentally observed behavior of pore volume dilation due to shear slip. The model allows the initial rapid increase in hydraulic aperture due to shear slip and asymptotically approaches a finite value after repeated shearing of a fracture segment. This aperture increase is the only feedback for mechanics into the fluid flow for a linear elastic mechanics problem. The same model is also extended to include poroelastic relations between flow and mechanics solver. The grid convergence result in the case of poroelastic flow-mechanics coupling for flow-induced shear failure is also obtained. This proves the robustness of the numerical and analytical modeling of fracture and friction in the extended finite volume method (XFVM) set-up. Finally, a grid convergent result for seismic moment magnitude for single fracture and fracture network with random initial hydraulic and friction properties is also obtained. The b-value, which represents the slope of seismic moment occurrence frequency decay vs seismic moment magnitude, which is approximately constant in a semi-logarithmic plot, is estimated. The numerical method leads to converged b-values for both single fracture and fracture network simulations, as grid and time resolutions are increased. For the resulting linear system, a sequential approach is used, that is, first, the flow and then the mechanics problems are solved. The new modeling framework is very useful to predict seismicity, permeability, and flow evolution in geological reservoirs. This is demonstrated with numerical simulations of enhancing a geothermal system.     

Tidal disruptions: II. A continuum theory for solid bodies with strength, with applications to the Solar System

We present a comprehensive theory for the breakup conditions for ellipsoidal homogeneous secondary bodies subjected to the tidal forces from a nearby larger primary: for materials ranging from purely fluid ones, to granular rubble-pile gravel-like ones, and to those with either cohesive or granular strength including cohesive rocks and metals. The theory includes but greatly extends the classical analyses given by Roche in 1847, which dealt only with fluids, and also our previous analysis [Holsapple, K.A., Michel, P., 2006. Icarus 183, 331-348], which dealt only with solid but non-cohesive bodies. The results here give the distance inside of which breakup must occur, for both a steadily orbiting satellite and for a passing or impacting object. For the fluid bodies there is a single specific shape (a “Roche Ellipsoid”) that can be in equilibrium at any given distance from a primary, and especially only one shape that can exist at the overall minimum distance (d/R)(ρ/ρp)^1/3=2.455, the classical well-known “Roche limit.” In contrast, solid bodies can exist at a given distance from a primary with a range of shapes. Here we give multiple plots of the minimum distances for various important combinations of body shape, spin, mass density, and the strength parameters characterized by an angle of friction and cohesive strength. Such results can be used in different ways. They can be used to estimate limits on strengths and mass densities for orbiting bodies at a known distance and shape. They can be used to determine breakup distances for passing bodies with an assumed strength and shape. They can be used to constraint physical properties such as bulk density of bodies with a known shape that were known to breakup at a given distance. A collection of approximately 40 satellites of the Solar System is used for comparison to the theory. About half of those bodies are closer than the Roche fluid limit and must have some cohesion and/or friction angle to exist at their present orbital distance. The required solid strength for those states is determined. Finally, we apply the theory to the break up of the SL9 comet at close approach with Jupiter. Our results make clear that the literature estimates of its bulk density depend markedly on unknown parameters such as shape, orientation and spin, and most importantly, material strength characterization.