Mineralogical and chemical evolution of the Ernest Henry Fe oxide–Cu–Au ore system, Cloncurry district, northwest Queensland, Australia

The Ernest Henry Cu–Au deposit was formed within a zoned, post-peak metamorphic hydrothermal system that overprinted metamorphosed dacite, andesite and diorite (ca 1740–1660 Ma). The Ernest Henry hydrothermal system was formed by two cycles of sodic and potassic alteration where biotite–magnetite alteration produced in the first cycle formed ca 1514±24 Ma, whereas paragenetically later Na–Ca veining formed ca 1529 +11/−8 Ma. These new U–Pb_titanite age dates support textural evidence for incursion of hydrothermal fluids after the metamorphic peak, and overlap with earlier estimates for the timing of Cu–Au mineralization (ca 1540–1500 Ma). A distal to proximal potassic alteration zone correlates with a large (up to 1.5 km) K–Fe–Mn–Ba enriched alteration zone that overprints earlier sodic alteration. Mass balance analysis indicates that K–Fe–Mn–Ba alteration—largely produced during pre-ore biotite- and magnetite-rich alteration—is associated with K–Rb–Cl–Ba–Fe–Mn and As enrichment and Na, Ca and Sr depletion. The aforementioned chemical exchange almost precisely counterbalances the mass changes associated with regional Na–Ca alteration. This initial transition from sodic to potassic alteration may have been formed during the evolution of a single fluid that evolved via alkali exchange during progressive fluid-rock interaction. Cu–Au ore, dominated by co-precipitated magnetite, minor specular hematite, and chalcopyrite as breccia matrix, forms a pipe-like body at the core of a proximal alteration zone dominated by K-feldspar alteration. Both the core and K-feldspar alteration overprint Na–Ca alteration and biotite–magnetite (K–Fe) alteration. Ore was associated with the concentration of a diverse range of elements (e.g. Cu, Au, Fe, Mo, U, Sb, W, Sn, Bi, Ag, F, REE, K, S, As, Co, Ba and Ca). Mineralization also involved the deposition of significant barite, K(–Ba)–feldspar, calcite, fluorite and complexly zoned pyrite. The complexly zoned pyrite and variable K–(Ba)–feldspar versus barite associations are interpreted to indicate fluctuating sulphur and/or barium supply. Together with the alteration zonation geochemistry and overprinting criteria, these data are interpreted to indicate that Cu–Au mineralization occurred as a result of fluid mixing during dilation and brecciation, in the location of the most intense initial potassic alteration. A link between early alteration (Na–Ca and K–Fe) and the later K-feldspathization and the Cu–Au ore is possible. However, the ore-related enrichments in particular elements (especially Ba, Mn, As, Mo, Ag, U, Sb and Bi) are so extreme compared with earlier alteration that another fluid, possibly magmatic in origin, contributed the diverse element suite geochemically independently of the earlier stages. Structural focussing of successive stages produced the distinctive alteration zoning, providing a basis both for exploration for similar deposits, and for an understanding of ore genesis.     

Capture-zone design in an aquifer influenced by cyclic fluctuations in hydraulic gradients

Design of a groundwater pumping and treatment system for a wood-treatment facility adjacent to the tidally influenced Fraser River estuary required the development of methodologies to account for cyclic variations in hydraulic gradients. Design of such systems must consider the effects of these cyclic fluctuations on the capture of dissolved-phase contaminants. When the period of the cyclic fluctuation is much less than the travel time of the dissolved contaminant from the source to the discharge point, the hydraulic-gradient variations resulting from these cycles can be ignored. Capture zones are then designed based on the average hydraulic gradient determined using filter techniques on continuous groundwater-level measurements. When the period of cyclic fluctuation in hydraulic gradient is near to or greater than the contaminant travel time, the resulting hydraulic-gradient variations cannot be ignored. In these instances, procedures are developed to account for these fluctuations in the capture-zone design. These include proper characterization of the groundwater regime, assessment of the average travel time and period of the cyclic fluctuations, and numerical techniques which allow accounting for the cyclic fluctuations in the design of the capture zone. Electronic Publication     

Sediment yield and storage variations in the Négron River catchment (south western Parisian Basin,France) during the Holocene period

In the Négron River catchment area (162 km²), surface‐sediment stores are composed of periglacial calcareous ‘grèze’ (5 × 10⁶ t) and loess (21 × 10⁶ t), and Holocene alluvium (12·6 × 10⁶ t), peat (0·6 × 10⁶ t) and colluvium (18·5 × 10⁶ t). Seventy‐five per cent of the Holocene sediments is stored along the thalwegs. Present net sediment yield, calculated from solid discharge at the Négron outlet, is low (0·6 t km^?2 a^?1) due to the dominance of carbonate rocks in the catchment. Mean sediment yield during the Holocene period is 7·0 t km^?2 a^?1 from alluvium stores and 7·6 t km^?2 a^?1 from colluvium stores. Thus, the gross sediment yield during the Holocene period is about 18·7 t km^?2 a^?1 and the sediment delivery ratio 3 per cent. The yield considerably varies from one sub‐basin to another (3·9 to 24·5 t km^?2 a^?1) according to lithology: about 25 per cent and 50 per cent of initial stores of periglacial grèze and loess respectively were reworked during the Holocene period. Sediment yield has increased by a factor of 6 in the last 1000 years, due to the development of agriculture. The very high rate of sediment storage on the slope during that period (88 per cent of the yield) can be accounted for by the formation of cultivation steps (‘rideaux’). It is predicted that the current destruction of these steps will result in a sediment wave reaching the valley floors in the coming decades. Subboreal and Subatlantic sediments and pollen assemblages in the Taligny marsh, where one‐third of the alluvium is stored, show the predominant influence of human activity during these periods in the Négron catchment. Copyright © 2002 John Wiley & Sons, Ltd.     

Field Survey and Numerical Simulations: A Review of the 1998 Papua New Guinea Tsunami

— The Papua New Guinea (PNG) tsunami of 1998 is re-examined through a detailed review of the field survey as well as numerous numerical computations. The discussion of the field survey explores a number of possible misinterpretations of the recorded data. The survey data are then employed by a numerical model as a validation tool. A Boussinesq model and a nonlinear shallow water wave (NLSW) model are compared in order to quantify the effect of frequency dispersion on the landslide-generated tsunami. The numerical comparisons indicate that the NLSW model is a poor estimator of offshore wave heights. However, due to what appears to be depth-limited breaking seaward of Sissano spit, both numerical models are in agreement in the prediction of maximum water elevations at the overtopped spit. By comparing three different hot-start initial profiles of the tsunami wave, it is shown that the initial shape and orientation of the tsunami wave is secondary to the initial displaced water mass in regard to prediction of water elevations on the spit. These numerical results indicate that agreement between numerical prediction of runup values with field recorded values at PNG cannot be used to validate either a NLSW tsunami propagation model or a specific landslide tsunami hot-start initial condition. Finally, with the use of traditional tsunami codes, a new interpretation of the PNG runup measurements is presented.     

Measurement of natural stresses in a Provence mine (Southern France)

Stress measurements were carried out in the Arc syncline using drifs in a lignite mine. Eleven sites were investigated using the flat jack and hydraulic fracturing (or stimulating) methods. Two stress states were found to coexist, one isotropic, the other highly anisotropic. The orientations of the principal stresses are not homogeneous and an orientation ranging from E-W to NE-SW predominates locally. This does not accord with the regional stress field. The vertical stresses are systematically underestimated.     

The Maltese Islands: climate, vegetation and landscape

The Maltese Islands, situated in the central Mediterranean, occupy an area of only some 316 km². The climate is typically Mediterranean: the average annual rainfall is c. 530 mm of which some 85% falls during the period October to March; the mean monthly temperature range is 12--26 °C, and the islands are very windy and sunny. Although small, the Maltese Islands have a considerable diversity of landscapes and ecosystems which are representative of the range and variety of those of the Mediterranean region. The islands are composed mainly of limestones, the soils are young and are very similar to the parent rocks, and there are no mountains, streams or lakes, but only minor springs; the main geomorphological features are karstic limestone plateaux, hillsides covered with clay taluses, gently rolling limestone plains, valleys which drain runoff during the wet season, steep sea-cliffs on the south-western coasts, and gently sloping rocky shores to the Northeast. The main vegetational assemblages are maquis, garigue and steppe; minor ones include patches of woodland, coastal wetlands, sand dunes, freshwater, and rupestral communities; the latter are the most scientifically important in view of the large number of endemic species they support. Human impact is significant. Some 38% of the land area is cultivated, c. 15% is built up, and the rest is countryside. The present landscape is a result of the interaction of geology and climate, coupled with the intense human exploitation of the environment over many thousands of years, which has altered the original condition of the vegetation cover, principally through the diversion of vast tracts of land to cultivation, the construction of terraces, water catchment devices, irrigation channels and drainage ditches, the grazing of animals on uncultivated land, and the development of land for buildings and industry. The scantiness of the soil, combined with the erratic rainfall and the periodic disturbance of the vegetation cover, has resulted in extensive erosion. As a consequence it is now difficult for the original vegetation to reassert itself, affecting the landscape drastically and permanently. Much of the original native flora has been lost or marginalised and the present day non-urban landscape is now dominated by vegetation consisting mainly of ruderal and introduced species. As the population increases, and human pressure on the environment mounts, such trends are likely to continue and it is only very recently that some important initiatives have been taken to manage the environment and halt the deterioration of the landscape.     

Caractéristiques et signification d'un niveau coquillier majeur à brachiopodes,marqueur événementiel dans l'évolution dévonienne de la Saoura (Sahara du Nord-Ouest,Algérie)

In the Saoura, the brachiopod shell beds, so-called niveau coralligène, correspond to a major shell deposit dated to the Late Emsian. Brachiopods and crinoids dominate the benthic assemblage that contains also corals, bryozoans, trilobites, goniatites, and orthocones. This major level has a large geographic distribution and it is characterized by a wide brachiopod diversity due to time-averaging, taphonomic feedback and alternate bottom conditions changing from soft to shelly and firm. This kind of brachiopod association is linked to a transgressive onlap system. At regional extent, we can correlate this major shell bed to similar shell deposits from the Ahnet-Mouydir, Tindouf, and Zemmour areas. It indicates an important transgressive event underlined by change in the sedimentation from detritic deposits to carbonate sediments. To cite this article: A. Ouali Mehadji et al., C. R. Geoscience 336 (2004).