Modelling Seismic Waves Around Underground Openings in Fractured Rock

—?The potential for large excavation-induced seismic events may be recognised, even if the timing of an event may be inherently unpredictable. In this case, modelling the wave propagation from a potential event could allow the dynamic motions around an excavation to be projected, and for areas of danger to be anticipated. However, the above and other potential applications require accurate models of wave interaction with the openings, as well as with the fractured rock which surrounds such excavations. This paper considers real recorded waveforms and how well these waveforms are modelled by explicit mechanical models of the source, the medium and the excavation. Models of experiments at three different scales of the problem are presented: small and large amplitude waveforms recorded around a deep-level mining tunnel in a synthetic rockburst experiment; waveforms from laboratory experiments of waves through plates of steel representing fractures; waveforms from active pulses in an acoustic emission experiment in a small volume of fractured rock at the surface of an underground excavation. The results show that elastic wave propagation around an excavation was a first approximation for small amplitude waves, but was less successful for modelling large amplitude waves and more fractured rock. Fractures in the models were represented explicitly with displacement discontinuities. Waveforms through known fracture geometries were particularly well-reproduced, and indicate the importance of fracture stiffness, the in situ stress state, and stress-dependence of the fractures in such models. Overall, the models are sufficiently successful at representing recorded behaviour, to be encouraging for the goal of representing accurate wave motions around excavations.     

On the effective temperature of large sunspot umbra using CrH sextets electronic state molecular lines

A high-resolution spectrum clearly shows the presence of A ⁶Σ⁺–X ⁶Σ⁺(0,0;0,1;1,0;2,0;2,1) and (2,2) bands system of CrH molecular lines in the spectral range 10,000 cm⁻¹ to 14,050 cm⁻¹. At least 3928 lines of the six bands, accounting for 57% of the lines registered in the laboratory can be identified with certainty in the sunspot spectrum. Most of the lines are found blended with TiO, CaH, MgH and other atomic species. These molecular lines are typically much more temperature sensitive than atomic lines, which make them ideal, complementary tool for studying cool stellar atmospheres as well as the internal structure of sunspots. Equivalent width for an adequate number of well identified molecular lines of these bands using the Gaussian-profile approximation method versus rotational quantum number J has been used to determine the effective rotational temperature of the CrH molecule. The range of effective rotational temperature value obtained from these bands is 1766 K to 2442 K. This range agrees well with the effective rotational temperatures derived for other molecules in sunspot umbrae.     

The geology and mineralisation at the Golden Pride gold deposit,Nzega Greenstone Belt,Tanzania

The Golden Pride gold deposit (∼3 Moz) is located in the central part of the Nzega Greenstone Belt at the southern margin of the Lake Victoria Goldfields in Tanzania. It represents an inferred Late Archaean, orogenic gold deposit and is hosted in intensely deformed meta-sedimentary rocks in the hanging wall of the approximately E–W striking Golden Pride Shear Zone. The hanging-wall sequence also includes felsic (quartz porphyritic) to mafic (lamprophyric) intrusions, as well as banded iron formations. Hydrothermal alteration phases associated with mineralisation are dominated by sericite and chlorite. Two main ore types can be distinguished, chlorite and silica ore, both occupying dilational sites and structural intersections in the hanging wall of the main shear zone. Sulphide minerals in both ore types include pyrrhotite, arsenopyrite, pyrite and accessory sphalerite, galena, sulphosalts and Ni–Co–Bi sulphides. Gold and tellurides are late in the paragenetic sequence and associated with a secondary phase of pyrrhotite deposition. Sulphur isotope compositions range from −6 to 7 per mil and are interpreted to reflect contributions from two distinct sources to the mineralising fluids in the Golden Pride gold deposit. A redox change, potentially induced by the intrusion of mafic melts, together with structural elements in the hanging wall of the Golden Pride Shear Zone, are interpreted to be the main controls on gold mineralisation in this deposit.     

Fluid generation and evolution during exhumation of deeply subducted UHP continental crust: Petrogenesis of composite granite–quartz veins in the Sulu belt,China

Composite granite–quartz veins occur in retrogressed ultrahigh pressure (UHP) eclogite enclosed in gneiss at General's Hill in the central Sulu belt, eastern China. The granite in the veins has a high‐pressure (HP) mineral assemblage of dominantly quartz+phengite+allanite/epidote+garnet that yields pressures of 2.5–2.1 GPa (Si‐in‐phengite barometry) and temperatures of 850–780°C (Ti‐in‐zircon thermometry) at 2.5 GPa (~20°C lower at 2.1 GPa). Zircon overgrowths on inherited cores and new grains of zircon from both components of the composite veins crystallized at c. 221 Ma. This age overlaps the timing of HP retrograde recrystallization dated at 225–215 Ma from multiple localities in the Sulu belt, consistent with the HP conditions retrieved from the granite. The ε_Hf(t) values of new zircon from both components of the composite veins and the Sr–Nd isotope compositions of the granite consistently lie between values for gneiss and eclogite, whereas δ¹⁸O values of new zircon are similar in the veins and the crustal rocks. These data are consistent with zircon growth from a blended fluid generated internally within the gneiss and the eclogite, without any ingress of fluid from an external source. However, at the peak metamorphic pressure, which could have reached 7 GPa, the rocks were likely fluid absent. During initial exhumation under UHP conditions, exsolution of H₂O from nominally anhydrous minerals generated a grain boundary supercritical fluid in both gneiss and eclogite. As exhumation progressed, the volume of fluid increased allowing it to migrate by diffusing porous flow from grain boundaries into channels and drain from the dominant gneiss through the subordinate eclogite. This produced a blended fluid intermediate in its isotope composition between the two end‐members, as recorded by the composite veins. During exhumation from UHP (coesite) eclogite to HP (quartz) eclogite facies conditions, the supercritical fluid evolved by dissolution of the silicate mineral matrix, becoming increasingly solute‐rich, more ‘granitic’ and more viscous until it became trapped. As crystallization began by diffusive loss of H₂O to the host eclogite concomitant with ongoing exhumation of the crust, the trapped supercritical fluid intersected the solvus for the granite–H₂O system, allowing phase separation and formation of the composite granite–quartz veins. Subsequently, during the transition from HP eclogite to amphibolite facies conditions, minor phengite breakdown melting is recorded in both the granite and the gneiss by K‐feldspar+plagioclase+biotite aggregates located around phengite and by K‐feldspar veinlets along grain boundaries. Phase equilibria modelling of the granite indicates that this late‐stage melting records P–T conditions towards the end of the exhumation, with the subsolidus assemblage yielding 0.7–1.1 GPa at <670°C. Thus, the composite granite–quartz veins represent a rare example of a natural system recording how the fluid phase evolved during exhumation of continental crust. The successive availability of different fluid phases attending retrograde metamorphism from UHP eclogite to amphibolite facies conditions will affect the transport of trace elements through the continental crust and the role of these fluids as metasomatic agents interacting with the mantle wedge in the subduction channel.     

The microstructure of minerals in coarse-grained Ca-Al-rich inclusions from the Allende meteorite

The microstructure and microchemistry of minerals in Ca-Al-rich, coarse-grained inclusions (CAI) from the Allende meteorite have been investigated with transmission electron microscopy (TEM). Spinels contain only low to moderate dislocation densities and are characterized by a ubiquitous, fine black spotty texture believed to originate from a slightly non-stoichiometric composition. Ti-Al-pyroxenes are relatively featureless, but contain veins of secondary phases apparently deposited in unhealed cracks. Chromite has been identified in the veins, suggesting transport of oxidized iron during alteration. Melilites exhibit the greatest variety of microstructures and are the most heavily altered phase in CAI. High dislocation densities are common and crystals exhibit considerable internal strain, indicating that they have not been annealed. Alteration occurs both as veins along cracks and in fronts extending across several grains. Plagioclase is commonly twinned, but dislocations are rare. The size and morphology of antiphase domains suggest a high temperature of formation with significant low-temperature annealing. Submicron pyroxene precipitates are a ubiquitous and unusual feature of Allende plagioclase whose properties are most consistent with prolonged slow cooling and equilibration after plagioclase crystallization. The precipitates appear to be sufficiently abundant to contain the majority of Mg present in plagioclase but do not easily account for Na and Ti abundances. Wollastonite needles from a cavity in a “fluffy” Type A inclusion exhibit the growth habits and relatively perfect external surfaces indicative of direct condensation from a vapor. Alteration products are predominantly crystalline and alteration of melilite appears to have proceeded primarily by solid-state diffusion at a temperature of approximately 920°K. Overall, the TEM observations suggest that CAI formed under near equilibrium conditions characterized by slow cooling and that solid-state bulk diffusion was the major process affecting their post-crystallization history.     

Turbulent flow over a very rough,random surface

A knowledge of the nature of turbulent flow over very rough surfaces is important for an understanding of the environment of crops, forests, and cities. For this reason, a wind-tunnel investigation was carried out on the variations in mean velocity, Reynolds shear-stress, and other turbulence quantities in a deep turbulent flow over a rough surface having a fair degree of randomness in the shapes, sizes, and positions of its elements.There was a layer close to the surface with considerable variations in both mean velocity and shear-stress, and the horizontal scale over which the mean velocity varied was much larger than the average distance between roughness elements. Above this layer, whose depth was of the order of the spacing between roughness elements, shear stress was constant with height, and the velocity profile had a logarithmic form. The usefulness of both mean profile and eddy-correlation methods for estimating fluxes above very rough terrain is discussed in the light of these findings.     

The variation of crustal stretching and different modes of rifting along the Australian southern continental margin

The southern margin of Australia is a passive continental margin, formed during a Late Jurassic–Cretaceous rifting phase. The development of this passive margin is mainly associated with extensional processes that caused crustal thinning. In this work, we have measured the amount of extension and the stretching factor (β factor) across seven transect profiles approximately evenly distributed across the margin. The obtained results show that the amount of extension and the β factor along the margin vary from west to east. The lowest amount of extension, low–intermediate β factors and a very narrow margin are observed in the western part with 80 km of extension and is underlain mostly by the Archean Yilgarn Craton and the Albany–Fraser Orogen. The Gawler Craton in the centre of the south Australian margin is another region of low extension and low–intermediate β factor. The largest amount of extension (384 km) and the largest β factor (β = 1.88) are found in the eastern part of the passive margin in an area underlain by Phanerozoic Tasman Orogen units. Our results imply that there is a strong control of the age and thickness of the continental lithosphere on the style of rifting along the Australian passive margin. Rifting of old and cold lithosphere results in a narrow passive margin, with the formation of relatively few faults with relatively wide spacing, while rifting of younger, warmer lithosphere leads to wide rifting that is accommodated by a large number of faults with small spacing.     

Anthropogenic influences on hydrocarbon contents of sediments deposited in eastern Lake Ontario since 1800

 The amounts and types of extractable hydrocarbon components in sediment cores from the Rochester Basin of eastern Lake Ontario provide a record of environmental changes that have accompanied the settlement and population growth of the surrounding land areas. Sediments deposited prior to the mid-1800s contain low concentrations of hydrocarbons that are dominated by land-plant wax components. Concentrations begin to rise in the late 1800s as erosion of soil and nutrients from watershed areas accelerated. This pattern continues into modern times. Episodes of enhanced aquatic productivity are sometimes recorded in twentieth-century sediments by the dominance of algal hydrocarbons, but land-plant components typically predominate. Petroleum residues begin to appear in sediments deposited in the late 1800's but remain minor constituents of the hydrocarbon contents of modern sediments in the Rochester Basin. Received: 21 March 1995 · Accepted: 11 August 1995