An Attempt to Integrate Reflection Seismics and Balanced Profiles

—Different techniques in Geophysics and Geology are used to derive the structure of the subsurface. They are based on different data sets, i.e., seismic and geological data, and a combination of these techniques should produce better earth models. The case study presented in this paper is based on data of the German Continental Reflection program (DEKORP) collected in the Münsterland basin and the Rhenish Massif located at the northern border of the Rhenohercynian fold and thrust belt of the Mid-European Variscides. In this study we present an attempt to integrate balanced profiles, i.e., structural geology, and reflection seismics. The integration is performed by synthetically modelling seismic waves according to the acquisition of the field data, where the velocity model is based on the balanced profile. The synthetic data are compared with the field observations. Differences between observed data and field data are either caused by velocity errors in the model or by errors in the balanced profile. Criteria are developed to interpret these differences in order to improve the joint model of geologists and geophysicists. The case study presented in this paper shows that the combination of balanced profiles and reflection seismics may lead to shortcuts in the determination of seismic velocities of the subsurface. These shortcuts can reduce processing times and processing costs of reflection seismic data.     

The identifiability of parameters in a water quality model of the Biebrza River, Poland

The identifiability of model parameters of a steady state water quality model of the Biebrza River and the resulting variation in model results was examined by applying the Monte Carlo method which combines calibration, identifiability analysis, uncertainty analysis, and sensitivity analysis. The water quality model simulates the steady state concentration profiles of chloride, phosphate, ammonium, and nitrate as a function of distance along a river. The water quality model with the best combination of parameter values simulates the observed concentrations very well. However, the range of possible modelled concentrations obtained for other more or less equally eligible combinations of parameter values is rather wide. This range in model outcomes reflects possible errors in the model parameters. Discrepancies between the range in model outcomes and the validation data set are only caused by errors in model structure, or (measurement) errors in boundary conditions or input variables. In this sense the validation procedure is a test of model capability, where the effects of calibration errors are filtered out. It is concluded that, despite some slight deviations between model outcome and observations, the model is successful in simulating the spatial pattern of nutrient concentrations in the Biebrza River.     

Solar flare injection and propagation of low-energy protons and electrons in the event of 7–9 July, 1966

Simultaneous observations of the 7–9 July 1966 solar particle event by energetic particle detectors on three satellites, IMP-III, OGO-III and Explorer 33 are utilized to show that large spatial gradients are present in the fluxes of 0.5–20 meV protons and 45 keV electrons. The event is divided into three parts: the ordinary diffusive component, the halo, and the core. The core corotates with the interplanetary field, and therefore it and the surrounding halo are interpreted as spatial features which are connected by the interplanetary magnetic field lines to the vicinity of the flare region. Upper limits to the interplanetary transverse diffusion coefficient for 4–20 meV protons at 1 AU are derived from the width of the halo. These are at least two orders of magnitude less than the parallel diffusion coefficient for the same energy particles.It is argued that the observed flux variations cannot be explained by an impulsive point source injection for any physically reasonable diffusion model. Instead, since the interplanetary transverse-diffusion coefficient is small for these low-energy particles, the observed spatial features are interpreted as the projection to 1 AU by the interplanetary field lines of an extensive injection profile at the sun. The geometry of the injection mechanism is discussed and it is suggested that some temporary storage of the flare particles occurs near the sun.Now at NASA, Goddard Space Flight Center, Greenbelt, Md., U.S.A.     

Baryon loading and the Weibel instability in gamma-ray bursts

The dynamics of two counter-streaming electron–positron–ion unmagnetized plasma shells with zero net charge is analysed in the context of magnetic field generation in gamma-ray burst internal shocks due to the Weibel instability. The effects of large thermal motion of plasma particles, arbitrary mixture of plasma species and space charge effects are taken into account. We show that, although thermal effects slow down the instability, baryon loading leads to a non-negligible growth rate even for large temperatures and different shell velocities, thus guaranteeing the robustness and the occurrence of the Weibel instability for a wide range of scenarios.     

Distribution of forms of sulfur in peats from saline environments in the Florida Everglades

Although there is published information on the mechanism of sedimentary pyrite formation resulting from bacterial reduction of sulfate, little is known about the distribution of forms of sulfur, including organic, in peats. In order to increase understanding of the geochemistry of sulfur in coals, we have determined distributions of forms of sulfur in five cores of saline peat and one of brackish peat, all from areas near the Shark River and Whitewater Bay in the coastal swamps of south Florida. All concentrations vary widely with depth. Total sulfur concentrations range up to 6% of dry solids. Minor amounts of sulfur are present as H₂S, S⁰, SO₄²⁻, and acid-soluble sulfide, but the principal forms are usually pyritic and organic. The ratio, organic/pyritic, is highly variable, but at a majority of levels in a profile is considerably greater than unity. It is inferred that topochemical factors are important in determining the distribution of sulfur forms in any element of volume.     

Crustal structure of the Alpine–Pannonian transition zone: a combined seismic and gravity study

 The crustal structure of the transition zone between the Eastern Alps and the western part of the Pannonian depression (Danube basin) is traditionally interpreted in terms of subvertical Tertiary strike-slip and normal faults separating different Alpine tectonic units. Reevaluation of approximately 4000-km-long hydrocarbon exploration reflection seismic sections and a few deep seismic profiles, together with data from approximately 300 wells, suggests a different structural model. It implies that extensional collapse of the Alpine orogene in the Middle Miocene was controlled by listric normal faults, which usually crosscut Alpine nappes at shallow levels, but at depth merge with overthrust planes separating the different Alpine units. The alternative structural model was tested along a transect across the Danube basin by gravity model calculations, and the results show that the model of low-angle extensional faulting is indeed viable. Regarding the whole lithosphere of the western Pannonian basin, gravity modelling indicates a remarkable asymmetry in the thickness minima of the attenuated crust and upper mantle. The approximately 160 km lateral offset between the two minima suggests that during the Miocene extension of the Pannonian basin detachment of the upper crust from the mantle lithosphere took place along a rheologically weak lower crust. Received: 13 July 1998 / Accepted: 18 March 1999     

澳大利亚造山型金矿和侵入岩有关金矿系统流体包裹体资料和矿化过程的比较

We have examined the fluid inclusion data and fluid chemistry of Australian orogenic and intrusion-related gold deposits to determine if similar mineralization processes apply to both styles of deposits.The fluid inclusion data from the Yilgarn craton,the western subprovince of the Lachlan orogen,the Tanami,Tennant Creek and Pine Creek regions,and the Telfer gold mine show that mineralization involved fluids with broadly similar major chemical components(i.e.H_2O NaCl CO_2±CH_4±N_2).These deposits formed over a wide range of temperature-pressure conditions(<200 to>500℃,<100～400MPa).Low salinity, CO_2-bearing inclusions and low salinity aqueous inclusions occur in both systems but the main difference between these two types of deposits is that most intrusion-related gold deposits also contain at least one population of high-salinity aqueous brine.Oxygen and hydrogen isotope data for both styles of deposit usually cannot distinguish between a magmatic or metamorphic source for the ore-bearing fluids.However,sulfur and lead isotope data for the intrusion-related gold deposits generally indicate either a magmatic source or mixing between magmatic and sedimentary sources of fluid.The metamorphic geothermal gradients associated with intrusion-related gold deposits are characterized by low pressure,high temperature metamorphism and high crustal geothermal gradients of>30/km.Where amphibole breakdown occurs in a granite source region,the spatially related deposits are more commonly associated with Cu-Au deposits rather than Au-only deposits that are associated with lower temperature granites.The dominant processes thought to cause gold precipitation in both types of deposits are fluid-rock interaction(e.g.desulfidation)or phase separation.Consideration of the physical and chemical properties of the H_2O-NaCl-CO_2 system on the nature of gold precipitation mechanisms at different crustal levels infers different roles of chemical(fluid-rock interaction)versus rheological(phase separation and/or fluid mixing)host-rock controls on gold deposition.This also implies that at the site of deposition,similar precipitation mechanisms operate at similar crustal levels for both orogenic and intrusion-related gold deposits.     

Abrupt behaviours of streamflow and sediment load variations of the Yangtze River basin,China

Monthly sediment load and streamflow series spanning 1963–2004 from four hydrological stations situation in the main stem of the Yangtze River, China, are analysed using scanning t‐test and the simple two‐phase linear regression scheme. Results indicate significant changes in the sediment load and streamflow from the upper reach to the lower reach of the Yangtze River. Relatively consistent positive coherency relations can be detected between streamflow and sediment load in the upper reach and negative coherency in the middle and lower reaches. Interestingly, negative coherency is found mainly for larger time scales. Changes in sediment load are the result mainly of human influence; specifically, the construction of water reservoirs may be the major cause of negative coherency. Accentuating the human influence from the upper to the lower reach results in inconsistent correlations between sediment load and streamflow. Decreasing sediment load being observed in recent years has the potential to alter the topographical properties of the river channel and the consequent development and recession of the Yangtze Delta. Results of this study are of practical significance for river channel management and evaluation of the influence of human activities on the hydrological regimes of large rivers. Copyright © 2012 John Wiley & Sons, Ltd.     

Anthropogenic influence on trace element geochemistry of healing mud (peloid) from Makirina Cove (Croatia)

Due to their balneotherapeutic features, the organic-rich sediments in Makirina Cove are an important source of healing mud. An environmental geochemistry approach using normalization techniques was applied to evaluate the anthropogenic contribution of trace metals to sediments used as healing mud. Sediment geochemistry was found to be associated with land-use change and storm events, as well as with proximity of a road with heavy traffic in the summer months. Local valley topography preferentially channels lithogenic and pollutant transport to the cove. Concentrations and distribution of trace metals indicate lithogenic (Ni, Cr, Co) and anthropogenic (Pb, Cu, Zn and Se) contributions to the sediments. The calculation of enrichment factors indicates a moderate (EFs between 2–3.5) input of anthropogenic Cu and Pb in surficial sediments to a depth of 10 cm. Patients using the Makirina Cove sediments as healing mud could be to some extent exposed to enhanced uptake of metals from anthropogenic sources via dermal contact.