On the sampling of airborne measurements of radiative properties of cloud fields: Results from International Cirrus Experiment (ICE), 1987

Summary During the first pilot phase of the International Cirrus Experiment (ICE) in September/October 1987 radiation measurements were carried out above and below broken cloud fields over the German Bight. Analyses of the measurements of 25.9.1987 (broken cumulus cloud field) showed an unexpected high absorption of solar radiation but not those of 28.9.1987 (stratocumulus/stratus cloud field). This might be explained by a partial negligence of cloud side factor under the viewing geometry of the pyranometer and other reasons. The light guide effect (leakage) within holes can account for the depletion of cloud reflectance and the enhancement of cloud transmittance at large cloud cover, as observed during the measurements on 28.9.1987. The fluctuation of the irradiances, which can be characterized by the intermittency parameter, has been related to the corresponding cloud cover by a regression equation. On the condition of similarity, this scaling parameter derived from sample measurements could be extrapolated to that of the whole cloud field. Thus, the estimation of the irradiance spectrum for the whole cloud field may be possible, from samples taken with aircraft and imaging data.With 5 Figures     

Stability and phase relations of nonstoichiometric clinopyroxenes in the join diopside-Ca-Eskola component at high pressures

The stability of nonstoichiometric clinopyroxenes in the Di-CaEsk join was experimentally studied, and phase diagrams were constructed for this join at pressures of 2.0 and 3.0 GPa. It was found that melting in the diopside part of the join occurs at anomalously low temperatures, and nonstoichiometric clinopyroxene coexists with a phase approaching diopside in composition. Phase relations along the Di-CaEsk join can be described and consistently interpreted only assuming that the diopside phase (α-diopside) is thermodynamically stable. The following phase volumes were observed along the solidus of the join at a pressure of 3.0 GPa: Cpx, αDi+Cpx, αDi+Cpx+Qtz, αDi+Cpx+Grt+Qtz, Cpx+Grt+Qtz, Cpx+Grt+Ky+Qtz, Grt+Ky+Qtz. Melting occurs via the eutectic reaction αDi+Cpx+Grt+Qtz=L at a temperature of about 1200°C in the diopside part of the system and via the eutectic reaction Cpx+Grt+Ky+Qtz=L at a temperature of 1400°C in the calcium-rich part of the system. At a pressure of 2.0 GPa, melting occurs at temperatures of 1200–1300°C via the eutectic reaction αDi+Cpx+ An + Qtz=L. The invariant equilibrium (L, An, Cpx, Grt, αDi, Qtz) lies within the pressure range 2.0–3.0 GPa. Nonstoichiometric clinopyroxenes form complex solid solutions, the compositions of which are not strictly confined to the Di-CaEsk join and depend on temperature, pressure, and phase association. Grossular garnets coexist with nonstoichiometric clinopyroxenes and α-diopside.     

Application of time- and magnitude-predictable model for long-term earthquake prediction in Iran

The regional time- and magnitude-predictable model has been applied successfully in diverse regions of the world to describe the occurrence of main shocks. In the current study, the model has been calibrated against the historical and instrumental catalog of Iranian earthquakes. The Iranian plateau is divided into 15 seismogenic provinces; then, the interevent times for strong main shocks have been determined for each one. The empirical relations reported by Papazachos et al. (Tectonophysics 271:295–323, 1997a) for the Alpine–Himalayan belt (including Iran) were adopted except for the constant terms that were calculated separately for every seismotectonic area. By using the calibrated equations developed for the study area and taking into account the occurrence time and magnitude of the last main shocks in each seismogenic source, the time-dependent conditional probabilities of occurrence P(?t) of the next main shocks during next 10, 20, 30, 40 and 50 years as well as the magnitude of the expected main shocks (M _f) have been estimated. The immediate probability (within next 10 years) of a large main shock is estimated to be high and moderate (>35 %) in all regions except zones 9 (M _f = 5.8) and 15 (M _f = 6.1). However, it should be noted that the probabilities have been estimated for different M _f values in 15 regions. Comparing the model predictions with the actual earthquake occurrence rates shows the good performance of the model for Iranian plateau.     

The relation between electric and redox potential: evidence from laboratory and field measurements

In field and laboratory experiments the relationship of redox, electric, and total potential was studied. This was carried out by using different arrangements of Pt and Ag/AgCl electrodes. The total potential is obtained by placing a Pt and an Ag/AgCl electrode at considerable distance apart on the rock. The studies indicate that the total potential yields the sum of redox and electric potential. Deviations larger than a couple of mV are caused by extensive fluid–rock interactions. In the laboratory it is seen that the magnitude of the electric potential is generally not larger than the artificially produced difference of the redox potential. The former is most likely attributed to a diffusion or membrane potential. At field scale the electric potential is designated as self potential. Redox potential measurements in the field may supply information from remnants of pore fluid of the rock and thereby may be suitable to support the exploration of concealed metal deposits. Detectable are in particular the fast H⁺ ions which are released by electrochemical reactions and transported by electromigration, both of which are attributed to the presence of the so called geobattery.     

Trace Metals in Selected Benthic Invertebrates from Belgian Coastal Waters (1981–1996)

Mercury, cadmium, lead, copper, zinc and chromium were assessed in brown shrimp (Crangon crangon), swimming crab (Liocarcinus holsatus), hermit crab (Pagurus bernhardus), starfish (Asterias rubens) and cut trough shell (Spisula subtruncata) from ten sampling stations off the Belgian coast, including three dredge spoils disposal sites. Calculations of time trends indicated that on the whole concentrations of trace metals had significantly decreased since 1981, also on dredged material dumping sites. Starfish and hermit crab were found to be the most promising benthic indicator species for metal contamination. Globally, the location of the sites, including the dredge spoils disposal zones, showed to be of little influence on the concentrations of trace metals.     

Mesoscale and macroscale aspects of the morning Urban Heat Island around Athens,Greece

Summary This paper examines the characteristics of the morning Urban Heat Island (UHI) in Athens basin, Greece. The study is performed by using and analyzing mesoscale and synoptic data covering the period 1990–2001. The UHI was estimated using the 0600 Local Time (LT) minimum temperature differences between rural and urban areas of the city. The analysis results in 7 UHI classes. A strong UHI was found for the 1/3 of days. The specific meteorological characteristics (surface and upper air, cooling rate) of each UHI class were revealed and examined. The spatial and temporal characteristics of the UHI were also identified. The UHI is largest on nights with clear skies and low relative humidity. In all seasons the UHI switches on rapidly in afternoon. During spring and summer, sea breeze commonly reduces and delays the UHI. Cases documenting the sensitivity and rapidity of changes of the UHI to changes in classes (cloud cover, wind) are also presented. The cooling rate is higher in the urban area under negative and lower under positive UHI conditions. Mesoscale and macroscale phenomena were examined during the different UHI classes through a weather type scheme. It was emerged that high UHI classes are associated with anticyclonic conditions or advection in the lower troposphere, while low UHI classes are associated with strong northeasterly winds. Anticyclonic conditions which frequently occur in spring and early summer, reduce or reverse the UHI to Urban Cooling Island.     

Use of remote sensing in lineament analysis for tectonic evolution and resource study of a part of Vindhyan Basin,Jhalawar area,India

Synoptivity and the exemplified fracture systems exhibited by the space borne imagery data has helped in solving many of the geological enigma in various parts of the world. The study conducted, using such remotly sensed data, in Jhalawar anticline, part of Proterozoic Cratonic Vindhyan Basin, Rajasthan, India, led to infer the history of tectonic evolution of peribasinal deformation which has been a matter of controversy for a century and more. In Landsat MSS data the Jhalawar region displays a panorama of lineaments and their analysis through azimuthal frequency diagrams, isofracture, lineament incidence and lineament intersection incidence density maps shows that the mean orientation of the lineaments fall in NW-SE and NE-SW and the shape of the various lineament density contours also show NE-SW and NW-SE orientations. In aerial photographs the area exhibits four sets of lineaments in NE-SW, NW-SE, N-S and E-W directions. Amongst these the former two sets are expressed as wide open master fracture systems with prolific vegetation fills along them and the latter two sets are characteristically observed as thin vegetation linears with frequent strike slip faulting along them. The further analysis of these fracture/lineament systems derived from multi-level remote sensing data shows that the Jhalawar anticline, which followed the pattern of flexural slip fold mechanism, was evolved by horizontally disposed σ1 (greatest principal stress) and 3σ (least principal stress) with the former oriented in NE-SW and the latter aligned in NW-SE directions with vertically disposed 2σ. The inference of such palaeostress environment of the Jhalawar region lead in the identification of a buried rigid basement high southwest of Jhalawar anticline, beneath the Deccan pile and loci of ground water, silica sand and probable igneous plug.     

Geochemistry and geochronology of proterozoic tholeiite dykes of east antarctica: evidence for mantle metasomatism

Two episodes of tholeiite dyke emplacement have been identified in Archaean high-grade metamorphics of the Napier Complex in Enderby Land. Middle Proterozoic Amundsen dykes are typical continental tholeiites and most of the chemical variation in individual suites can be explained in terms of different degrees of partial melting and low-pressure crystal fractionation. Group I Amundsen tholeiites were derived from a relatively homogeneous source region 1,190±200 m.y. ago, whereas that of the group II Amundsen tholeiites was chemically and isotopically heterogeneous. Group II dykes have various degrees of enrichment in incompatible elements, and commonly show normalised trace element abundance patterns with negative Nb anomalies. These features imply variable metasomatism of the source region by a volatile-rich fluid phase (rather than a melt of any observed igneous composition) enriched in K, Rb, Ba, Th, and possibly La and Ce.Early Proterozoic (2,350±48 m.y.) tholeiites were emplaced at considerable depths in the crust during the waning stages of granulite-facies metamorphism and include a high-Mg suite of possible komatiitic affinity, ranging in composition from hypersthene-rich tholeiite (norite) to quartz-rich tholeiite. They tend to have higher ratios of highly to moderately incompatible elements (e.g., K/Zr, K/Ce), and larger Nb anomalies (i.e., higher K/Nb) compared with middle Proterozoic tholeiites, suggesting derivation from more enriched source regions. Isotopic data are not compatible with significant crustal contamination, but constrain source metasomatism to a time immediately before emplacement. Metasomatism of the source region of the much younger group I tholeiites may have been contemporaneous with that of the high-Mg suite.     

The stratospheric sulfate aerosol layer: Processes,models, observations,and simulations

After briefly reviewing the observational data on the stratospheric sulfate aerosol layer, the chemical and physical processes that are likely to fix the properties of the layer are discussed. We present appropriate continuity equations for aerosol particles, and show how to solve the equations on a digital computer. Simulations of the unperturbed aerosol layer by various published models are discussed and the sensitivity of layer characteristics to variations in several aerosol model parameters is studied. We discuss model applications to anthropogenic pollution problems and demonstrate that moderate levels of aerospace activity (supersonic transport and space shuttle operations) will probably have only a negligible effect on global climate. Finally, we evaluate the possible climatic effect of a ten-fold increase in the atmospheric abundance of carbonyl sulfide.