Wiener optimal filtering of GRACE data

We present a spatial averaging method for Gravity Recovery and Climate Experiment (GRACE) gravity-field solutions based on the Wiener optimal filtering. The optimal filter is designed from the least-square minimization of the difference between the desired and filtered signals. It requires information about the power spectra of the desired gravitational signal and the contaminating noise, which is inferred from the average GRACE degree-power spectrum. We show that the signal decreases with increasing spherical harmonic degree j with approximately j^−b, where b = 1.5 for GRACE data investigations. This is termed the Second Kaula rule of thumb for temporal variations of the Earth’s gravity field. The degree power of the noise increases, in the logarithmic scale, linearly with increasing j. The Wiener optimal filter obtained for the signal model with b = 1.5 closely corresponds to a Gaussian filter with a spatial half width of 4° (∼440 km). We find that the filtered GRACE gravity signal is relatively insensitive to the exponent b of the signal model, which indicates the robustness of Wiener optimal filtering. This is demonstrated using the GFZ-GRACE gravity-field solution for April 2004.     

An inter-comparison of tidal solutions computed with a range of unstructured grid models of the Irish and Celtic Sea Regions

Three finite element codes, namely TELEMAC, ADCIRC and QUODDY, are used to compute the spatial distributions of the M₂, M₄ and M₆ components of the tide in the sea region off the west coast of Britain. This region is chosen because there is an accurate topographic dataset in the area and detailed open boundary M₂ tidal forcing for driving the model. In addition, accurate solutions (based upon comparisons with extensive observations) using uniform grid finite difference models forced with these open boundary data exist for comparison purposes. By using boundary forcing, bottom topography and bottom drag coefficients identical to those used in an earlier finite difference model, there is no danger of comparing finite element solutions for “untuned unoptimised solutions” with those from a “tuned optimised solution”. In addition, by placing the open boundary in all finite element calculations at the same location as that used in a previous finite difference model and using the same M₂ tidal boundary forcing and water depths, a like with like comparison of solutions derived with the various finite element models was possible. In addition, this open boundary was well removed from the shallow water region, namely the eastern Irish Sea where the higher harmonics were generated. Since these are not included in the open boundary, forcing their generation was determined by physical processes within the models. Consequently, an inter-comparison of these higher harmonics generated by the various finite element codes gives some indication of the degree of variability in the solution particularly in coastal regions from one finite element model to another. Initial calculations using high-resolution near-shore topography in the eastern Irish Sea and including “wetting and drying” showed that M₂ tidal amplitudes and phases in the region computed with TELEMAC were in good agreement with observations. The ADCIRC code gave amplitudes about 30 cm lower and phases about 8° higher. For the M₄ tide, in the eastern Irish Sea amplitudes computed with TELEMAC were about 4 cm higher than ADCIRC on average, with phase differences of order 5°. For the M₆ component, amplitudes and phases showed significant small-scale variability in the eastern Irish Sea, and no clear bias between the models could be found. Although setting a minimum water depth of 5 m in the near-shore region, hence removing wetting and drying, reduced the small-scale variability in the models, the differences in M₂ and M₄ tide between models remained. For M₆, a significant reduction in variability occurred in the eastern Irish Sea when a minimum 5-m water depth was specified. In this case, TELEMAC gave amplitudes that were 1 cm higher and phases 30° lower than ADCIRC on average. For QUODDY in the eastern Irish Sea, average M₂ tidal amplitudes were about 10 cm higher and phase 8° higher than those computed with TELEMAC. For M₄, amplitudes were approximately 2 cm higher with phases of order 15° higher in the northern part of the region and 15° lower in the southern part. For M₆ in the north of the region, amplitudes were 2 cm higher and about 2 cm lower in the south. Very rapid M₆ tidal-phase changes occurred in the near-shore regions. The lessons learned from this model inter-comparison study are summarised in the final section of the paper. In addition, the problems of performing a detailed model–model inter-comparison are discussed, as are the enormous difficulties of conducting a true model skill assessment that would require detailed measurements of tidal boundary forcing, near-shore topography and precise knowledge of bed types and bed forms. Such data are at present not available.     

Tectonics of southwestern Mexico,isotopic evidence,nuclear Central America,Late Cretaceous break up

In the paleogeographic reconstruction of Mexico and northern Central America, an ever-increasing amount of evidence shows that the entire region is a collage of suspect terranes transported from abroad, whose timing and sense of motion are now beginning to be understood. Among these, the Chortis block (nuclear Central America) and the Baja California Peninsula have been proposed as pieces of continent separated from the Pacific coast of southwestern Mexico, that have moved either southeastward by the Farallon plate or northwestward by the Kula plate. Previous studies mainly confined to the northern margin of the Chortis block, confirmed a left-lateral displacement of 130 km in Neogene time. Further studies made northwestward along the Mexican coast provided a better understanding of magmatic and metamorphic processes in the area, and suggested times of detachment increased to 30 Ma, 40 Ma, and 66 Ma. The pre-detachment westernmost position of the block has changed, depending on the model chosen, from Puerto Vallarta and beyond, to the current position. Here we show that the isotopic mineral ages from coastal granites along the coast from Puerto Vallarta, Jalisco (80 Ma) to Puerto Angel, Oaxaca (11 Ma) record systematic decrease of cooling ages from NW to SE. This pattern is interpreted to result from the progressive uplift of rocks exposed at the present-day coast in that direction, such uplift occurred in response to the development of the Middle America Trench at the newly formed continental margin when the Chortis block was sliding at an average rate of 1.5 cm/year in a sinistral sense to its present position. Our results also constrain the position of the Kula-Farallon spreading axis north of Puerto Vallarta. These observations led us to conclude that several indicators point to this time and region for the onset of strike-slip drifting of the Chortis block toward its current position. Here, we also present several view points in terms of other possilble interpretations to different tectonic, geologic and isotopic data sets published recently by different authors.     

ON THE GENERATION OF P AND S WAVE ENERGY IN CRYSTALLINE ROCKS*

A seismic source consisting of a 700 kg weight that could be dropped vertically or projected down a ramp inclined at 45° to the vertical was tested as a source of P, SV and SH waves within a crystalline rock body at Chalk River, Ontario. The seismic energy was recorded by arrays of both horizontal and vertical-component geophones at distances between 30 and 600 m from the source, which was operated over glacial overburden varying in thickness from less than a meter to a few tens of meters. Seismic energy was more efficiently generated when the overburden thickness was at least several meters. The signals identified visually as S are generally true S, though some may be the converted wave PS. The SV amplitudes are generally larger than those of P, regardless of the type of shot, while the signal frequencies are roughly 60 Hz and 90 Hz, respectively. The horizontal-component seismograms for the inclined shots showed no evidence of SH polarization, and the SH amplitudes were only rarely enhanced relative to P and SV amplitudes on changing from vertical to inclined shots. These unexpected results are attributed to the combined effect of the high velocity and density contrasts and the irregularity of the boundary between the glacial overburden and the rock body.     

Facies Structure and Quantitative Parameters of Pleistocene Sediments of the Bering Sea

Lithofacies zoning is described for the first time for the Neo- and Eopleistocene of the Bering Sea. Four lithofacies sedimentation zones are distinguished: (I) terrigenous; (II) siliceous–terrigenous; (III) siliceous, and (IV) volcanoterrigenous ones. Corresponding maps were treated using Ronov volumetric method to quantify sedimentation parameters for distinguished lithofacies zones (subzones) and types of Pleistocene sediments. It was revealed that terrigenous sediments predominate over other sediments. Accumulation of the terrigenous sediments was more intense (by 1.4 times) in the Neopleistocene than in the Eopleistocene. The sedimentation rate of siliceous sediments of the Bowers Ridge in the Eopleistocene was two times higher than in the Neopleistocene.     

Artificial light at night: implications for early life stages development in four temperate freshwater fish species

Flora and fauna have both evolved under a natural cycle of light and dark. But especially in urban areas, the night is now increasingly disturbed by artificial light. Many traits and behaviours in fish are triggered by a circadian clock, for example hatching and swim bladder inflation, which predominantly take place at dusk or night. As lighting becomes brighter and extends farther into rural areas, the distinction between day and night becomes increasingly blurred. Therefore, the loss of diurnal trigger by artificial light at night was hypothesized having deleterious effects on these traits and impact fish reproduction. To assess these effects, eggs of four native freshwater fishes, Eurasian perch Perca fluviatilis, roach Rutilus rutilus, bleak Alburnus alburnus and chub Leuciscus cephalus, were incubated under two different light conditions: a photoperiod of 14 h light:10 h darkness (LD) and continuous illumination (LL). The time to hatch and swim bladder inflation was recorded. The species showed inconsistent reactions to the light treatments. In roach and bleak, the time to 50% hatch was longer in LL, whereas continuous lighting had an accelerating effect in chub. Incubation in LL elongated the hatching period in perch and roach and, in perch, the onset of darkness seemed to trigger hatching. The swim bladder inflation was significantly promoted by continuous light in chub and bleak but was not affected in roach. In conclusion, nocturnal artificial illumination could have an effect on hatching and initial swim bladder filling by masking the day–night-change and thereby diminish the trigger effect. However, the reactions were species specific and the increase in variation indicated a lack of diurnal triggering, whilst a general deleterious effect of artificial light at night has not been identified on early life stages.     

First Data on the Isotopic Age of Zircons from Rocks of the Roseta Ultramafic Massif,Southern Margin of the São Francisco Craton (Brazil)

Doklady Earth Sciences - The results of isotope U–Pb dating of zircons from lherzolite and vein olivine orthopyroxenite composing the Roseta ultramafic massif are presented. The zircons...     

The role of prior model calibration on predictions with ensemble Kalman filter

This paper, based on a real world case study (Limmat aquifer, Switzerland), compares inverse groundwater flow models calibrated with specified numbers of monitoring head locations. These models are updated in real time with the ensemble Kalman filter (EnKF) and the prediction improvement is assessed in relation to the amount of monitoring locations used for calibration and updating. The prediction errors of the models calibrated in transient state are smaller if the amount of monitoring locations used for the calibration is larger. For highly dynamic groundwater flow systems a transient calibration is recommended as a model calibrated in steady state can lead to worse results than a noncalibrated model with a well-chosen uniform conductivity. The model predictions can be improved further with the assimilation of new measurement data from on-line sensors with the EnKF. Within all the studied models the reduction of 1-day hydraulic head prediction error (in terms of mean absolute error [MAE]) with EnKF lies between 31% (assimilation of head data from 5 locations) and 72% (assimilation of head data from 85 locations). The largest prediction improvements are expected for models that were calibrated with only a limited amount of historical information. It is worthwhile to update the model even with few monitoring locations as it seems that the error reduction with EnKF decreases exponentially with the amount of monitoring locations used. These results prove the feasibility of data assimilation with EnKF also for a real world case and show that improved predictions of groundwater levels can be obtained.     

Superposition of gold mineralisation on pre‐existing carbonate alteration: Structural evidence from the Mulgarrie gold deposit,Yilgarn Craton

Carbonate alteration at the Mulgarrie gold mine in the Eastern Goldfields of Western Australia, is represented by porphyroblasts, veins and pervasive, texturally destructive, carbonatisation. Two foliations, S_1M and S_2M, were produced by two separate deformation events at the mine‐scale, D_1M and D_2M. D_1M and D_2M both occurred in response to regional D₂ tectonism. Carbonate alteration was the product of two separate episodes of fluid ingress: the earlier produced magnesite and the latter Fe‐dolomite. Both periods of carbonate alteration occurred pre‐ to early syn‐D_2M, when mafic to ultramafic komatiitic rocks reacted with fluids that moved along regional faults and pre‐date the alteration associated with regional peak metamorphism. Gold at Mulgarrie overprints pre‐ and late syn‐D₂ quartz veins in zones of massive carbonate alteration, suggesting it has a late‐ to post‐D₂ timing. This late timing agrees with the generally accepted syn‐D₃ (and younger) age for gold mineralisation in the Eastern Goldfields. We suggest that carbonate alteration at Mulgarrie is not a product of the hydrothermal event responsible for the gold mineralisation. Rather, the different relative timing of magnesite, Fe‐dolomite and gold indicates there were two carbonate‐producing fluid systems and a fluid transporting the gold overprinted these. Similarly, early carbonate alteration may play a role in localising auriferous vein deposits throughout the Yilgarn and other Archaean cratons.