X-ray spectral evolution of low-mass X-ray binary GX 349+2

We present the results of a systematic investigation of spectral evolution in the Z source GX 349+2, using data obtained during 1998 with the Proportional Counter Array (PCA) on-board the RXTE satellite. The source traced a extended normal branch (NB) and flaring branch (FB) in the colour–colour diagram (CD) and the hardness-intensity diagram (HID) during these observations. The spectra at different positions of the Z-track were best fitted by a model consisting of a disc blackbody and a Comptonized spectrum. A broad (Gaussian) iron line at ∼6.7 keV is also required to improve the fit. The spectral parameters showed a systematic and significant variation with the position along the Z-track. The evolution in spectral parameters is discussed in view of the increasing mass accretion rate scenario, proposed to explain the motion of Z sources in the CD and the HID.     

Winter Temperature Variability During Warming and Cooling Periods in the Conterminous United States, 1947–1992

Summary  Much literature has reported on the concept of increased surface temperature variability during cool periods, although analyses on temperature records have rendered inconsistent results. In addition, temperature variability during transition periods has been rarely investigated. This study examines temperature variability during wintertime cooling (1947–1977) and warming (1978–1992) periods for the conterminous United States to determine both whether temperature variability is different during warming or cooling periods, and whether the change in variability is supported by midtropospheric circulation conditions. Our results indicate that regions with high temperature variability are mostly found below the troughs in the midtropospheric pressure fields. The direction of change in temperature variability corresponding to cooling or warming conditions, however, varied spatially. For the southeastern and northeastern United States, winter temperatures were more variable during the cooling period than during the warming period, while the northern and central Great Plains had greater temperature variability during the warming period than the cooling period. Similar spatial patterns are also found for the changes in the variability of geopotential height fields. Such spatial patterns in the temperature and height variability during warming and cooling periods may be related to the dominant midtropospheric circulation patterns, such as the different phases of the Pacific-North American teleconnection pattern, and the El Ni?o/Southern Oscillation events. It is concluded that the response of interannual temperature variability to climatic changes is determined by the variation in circulation patterns, and therefore, not spatially uniform. Received September 26, 1996 Revised April 2, 1998     

Evolutionary state of W UMa-type systems

The evolutionary status of a sample of 31 W UMa-type systems (20 of W, 9 of A, and 2 of A/W sub-class) is examined and discussed on the basis of their positions in the H-R, mass-radius and mass-luminosity diagrams. The absolute elements of these systems have been evaluated by use of their spectroscopic and photometric data as they were found in the literature. Since different analysis methods have been used by the various investigators this gives the opportunity to make different H-R, mass-radius and mass-luminosity diagrams, according to the method used, and compare the results.Moreover, from the spectral type-period diagram of those systems that have spectral types from O to G2 it was found that all of them lie in the evolved region. Finally, the log (L _l/L _s) log (M _l/M _s) diagrams are presented and discussed.     

Stereoscopic Analysis of the 31 August 2007 Prominence Eruption and Coronal Mass Ejection

The spectacular prominence eruption and CME of 31 August 2007 are analyzed stereoscopically using data from NASA??s twin Solar Terrestrial Relations Observatory (STEREO) spacecraft. The technique of tie pointing and triangulation (T&T) is used to reconstruct the prominence (or filament when seen on the disk) before and during the eruption. For the first time, a filament barb is reconstructed in three-dimensions, confirming that the barb connects the filament spine to the solar surface. The chirality of the filament system is determined from the barb and magnetogram and confirmed by the skew of the loops of the post-eruptive arcade relative to the polarity reversal boundary below. The T&T analysis shows that the filament rotates as it erupts in the direction expected for a filament system of the given chirality. While the prominence begins to rotate in the slow-rise phase, most of the rotation occurs during the fast-rise phase, after formation of the CME begins. The stereoscopic analysis also allows us to analyze the spatial relationships among various features of the eruption including the pre-eruptive filament, the flare ribbons, the erupting prominence, and the cavity of the coronal mass ejection (CME). We find that erupting prominence strands and the CME have different (non-radial) trajectories; we relate the trajectories to the structure of the coronal magnetic fields. The possible cause of the eruption is also discussed.     

VELOCITY DISPERSION OF SEISMIC WAVES*

In well velocity surveys made to calibrate Sonic (CV) Logs the calibration survey uses frequencies around 50 Hz whereas the Sonic Logging tool uses frequencies around 20 kHz. There thus exists the possibility of making a direct measure of velocity dispersion. In any one survey the disturbing factors, both instrumental and operational, will often mask any dispersive effect that might exist. Consequently this paper reports on a statistical analysis of the velocity differences resulting from calibration surveys and Sonic logs. Only Borehole Compensated Sonic Logs were used. Four areas were investigated: the North Sea, Abu Dhabi, Libya and Alaska. After rejecting logs and calibration records which were obviously in error there remained 424000 feet (about 130 km) of usable log distributed throughout 66 wells. The four areas were analysed separately and in no case was the estimated dispersion significantly different from zero. However, the mean values did correlate with lithology from (? 0.17 ± 0.18)% for the essentially carbonate section in Abu Dhabi to (+ 0.45 ± 0.25)% for the sand-shale section in Alaska, a positive sign meaning that the higher frequencies travelled faster. Except for Alaska the calibration surveys were made with a wall-clamp geophone, and for these areas amplitude measurements were made. After suitable corrections estimates of the absorption parameter Q were obtained. These varied from 20 to 200 with mean values of 63 for Libya, 70 for Abu Dhabi and 88 for the North Sea (excluding the Tertiary). If, as is usually assumed, the absorption mechanism is linear and is described by a Q which is independent of frequency, then these values would necessarily imply dispersion of several percent. As instanced above no such dispersion was observed. It is possible that the expected dispersion was compensated for by invasion of the mud filtrate into the borehole walls, but it is more likely that the absorption mechanism was substantially non-linear.     

Heights of formation of non-magnetic solar lines suitable for velocity studies

Heights of formation of lines that do not exhibit Zeeman splitting are calculated using an LTE, partial non-LTE, and full non-LTE approach. Non-magnetic (g=0) lines are valuable for velocity investigations in quiet-Sun magnetic field regions, and a knowledge of their formation heights is useful for obtaining three dimensional velocity profiles in these regions. Presently at Sacramento Peak Observatory. Operated by the Association of Universities for Research in Astronomy, Inc., under contract with the National Science Foundation.     

Reconstructing the 3D Morphology of the 17 May 2008 CME

We model the kinematics and three-dimensional distribution of mass in a coronal mass ejection (CME) observed on 17 May 2008, using a comprehensive analysis of STEREO images of the CME. The CME is a surprisingly fast one for solar minimum, reaching velocities of up to 1120 km?s^?1. It can be followed continuously from inception all the way out to 1 AU. We find that the appearance of the CME can be modeled reasonably well as a combination of two distinct fronts that expand outward in a self-similar fashion. The model implies that STEREO-B is struck by the weaker of these two fronts on 19 May, and the in situ instruments on STEREO-B do see a weak density and magnetic field enhancement at the expected time.     

The interplanetary electric field, cleft currents and plasma convection in the polar caps

This report investigates the suggestion that the pattern of plasma convection in the polar cleft region is directly determined by the interplanetary electric field (IEF). Owing to the geometrical properties of the magnetosphere, the East-West component of the IEF will drive field-aligned currents which connect to the ionosphere at points lying on either side of noon, while currents associated with the North-South component of the IEF will connect the two polar caps as sheet currents centered at noon. The effects of the hypothesized IEF driven cleft current systems on polar cap ionospheric plasma convection are investigated through a series of numerical simulations. The simulations demonstrate that this simple electrodynamic model can account for the narrow “throats” of strong dayside antisunward convection observed during periods of southward interplanetary magnetic field (IMF) as well as the sunward convection observed during periods of strongly northward IMF. Thedawn-dusk shift of polar cap convection which is related to the B_y component of the IMF is also accounted for by the model.     

Comparative Analysis of Seismic Response Characteristics of Pile-Soil-Stnicture Interaction System

The study on the earthquake-resistant performance of a pile-soil-structure interaction system is a relatively complicated and primarily important issue in civil engineering practice. In this paper, a computational model and computation procedures for pile-supported structures, which can duly consider the pile-soil interaction effect, are established by the finite element method. Numerical implementation is made in the time domain. A simplified approximation for the seismic response analysis of pile-soil-structure systems is briefly presented. Then a comparative study is performed for an engineering example with numerical results computed respectively by the finite element method and the simplified method. Through comparative analysis, it is shown that the results obtained by the simplified method well agree with those achieved by the finite element method. The numerical results and findings will offer instructive guidelines for earthquake-resistant analysis and design of pile-supported structures.