Using spectral information from the NIR water absorption features for the retrieval of canopy water content

Canopy water content (CWC) is important for mapping and monitoring the condition of the terrestrial ecosystem. Spectral information related to the water absorption features at 970 nm and 1200 nm offers possibilities for deriving information on CWC. In this study, we compare the use of derivative spectra, spectral indices and continuum removal techniques for these regions. Hyperspectral reflectance data representing a range of canopies were simulated using the combined PROSPECT + SAILH model. Best results in estimating CWC were obtained by using spectral derivatives at the slopes of the 970 nm and 1200 nm water absorption features. Real data from two different test sites were analysed. Spectral information at both test sites was obtained with an ASD FieldSpec spectrometer, whereas at the second site HyMap airborne imaging spectrometer data were also acquired. Best results were obtained for the derivative spectra. In order to avoid the potential influence of atmospheric water vapour absorption bands the derivative of the reflectance on the right slope of the canopy water absorption feature at 970 nm can best be used for estimating CWC.     

Geostatistical incorporation of spatial coordinates into supervised classification of hyperspectral data

 This paper presents a methodology to incorporate both hyperspectral properties and spatial coordinates of pixels in maximum likelihood classification. Indicator kriging of ground data is used to estimate, for each pixel, the prior probabilities of occurrence of classes which are then combined with spectral-based probabilities within a Bayesian framework. In the case study (mapping of in-stream habitats), accounting for spatial coordinates increases the overall producer's accuracy from 85.8% to 93.8%, while the Kappa statistic rises from 0.74 to 0.88. Best results are obtained using only indicator kriging-based probabilities, with a stunning overall accuracy of 97.2%. Significant improvements are observed for environmentally important units, such as pools (Kappa: 0.17 to 0.74) and eddy drop zones (Kappa: 0.65 to 0.87). The lack of benefit of using hyperspectral information in the present study can be explained by the dense network of ground observations and the high spatial continuity of field classification which might be spurious. Received: 12 April 2001 / Accepted: 7 September 2001     

Reducing the draconitic errors in GNSS geodetic products

Systematic errors at harmonics of the GPS draconitic year have been found in diverse GPS-derived geodetic products like the geocenter $Z$ -component, station coordinates, $Y$ -pole rate and orbits (i.e. orbit overlaps). The GPS draconitic year is the repeat period of the GPS constellation w.r.t. the Sun which is about 351 days. Different error sources have been proposed which could generate these spurious signals at the draconitic harmonics. In this study, we focus on one of these error sources, namely the radiation pressure orbit modeling deficiencies. For this purpose, three GPS+GLONASS solutions of 8 years (2004–2011) were computed which differ only in the solar radiation pressure (SRP) and satellite attitude models. The models employed in the solutions are: (1) the CODE (5-parameter) radiation pressure model widely used within the International GNSS Service community, (2) the adjustable box-wing model for SRP impacting GPS (and GLONASS) satellites, and (3) the adjustable box-wing model upgraded to use non-nominal yaw attitude, specially for satellites in eclipse seasons. When comparing the first solution with the third one we achieved the following in the GNSS geodetic products. Orbits: the draconitic errors in the orbit overlaps are reduced for the GPS satellites in all the harmonics on average 46, 38 and 57 % for the radial, along-track and cross-track components, while for GLONASS satellites they are mainly reduced in the cross-track component by 39 %. Geocenter $Z$ -component: all the odd draconitic harmonics found when the CODE model is used show a very important reduction (almost disappearing with a 92 % average reduction) with the new radiation pressure models. Earth orientation parameters: the draconitic errors are reduced for the $X$ -pole rate and especially for the $Y$ -pole rate by 24 and 50 % respectively. Station coordinates: all the draconitic harmonics (except the 2nd harmonic in the North component) are reduced in the North, East and Height components, with average reductions of 41, 39 and 35 % respectively. This shows, that part of the draconitic errors currently found in GNSS geodetic products are definitely induced by the CODE radiation pressure orbit modeling deficiencies.     

Land Cover Mapping for Namdapha National Park (Arunachal Pradesh), India Using Harmonized Land Cover Legends

Since last few decades RS-GIS is playing vital role in studying and mapping spatiotemporal responses of land cover, however, as a matter of fact, the mapping outputs largely depend on the expert's/user's preferences because location specific and people specific land cover classification systems are adopted autonomously for image classification in GIS. This may actually lead to an ambiguous definition of a particular land cover type when such different maps are compared at global level. In 1993, FAO and UNEP started efforts for development of a software tool know as LCCS which is a comprehensive standardized tool capable of providing land cover characterization to all possible land cover types in the world regardless of spatial relevance, mapping scale, data collection method etc. Adding to the global efforts of land cover legend harmonization and mapping, this study presents development of harmonized land cover legends for Namdapha National Park located in north-eastern Indian Himalayan region using LCCS and subsequent mapping. The potential of Remote Sensing (RS) and Geographical Information Systems (GIS) in forest/land cover mapping is very well recognized. Therefore, adopting the developed harmonized legends for the study area, land cover mapping was done using RS-GIS approach.     

Non-linear motions of Australian geodetic stations induced by non-tidal ocean loading and the passage of tropical cyclones

We investigate daily and sub-daily non-tidal oceanic and atmospheric loading (NTOAL) in the Australian region and put an upper bound on potential site motion examining the effects of tropical cyclone Yasi that crossed the Australian coast in January/February 2011. The dynamic nature of the ocean is important, particularly for northern Australia where the long-term scatter due to daily and sub-daily oceanic changes increases by 20–55 % compared to that estimated using the inverted barometer (IB) assumption. Correcting the daily Global Positioning System (GPS) time series for NTOAL employing either a dynamic ocean model or the IB assumption leads to a reduction of up to 52 % in the weighted scatter of daily coordinate estimates. Differences between the approaches are obscured by seasonal variations in the GPS precision along the northern coast. Two compensating signals during the cyclone require modelling at high spatial and temporal resolution: uplift induced by the atmospheric depression, and subsidence induced by storm surge. The latter dominates ( \(>\) 135 %) the combined net effect that reaches a maximum of 14 mm, and 10 mm near the closest GPS site TOW2. Here, 96 % of the displacement is reached within 15 h due to the rapid transit of cyclones and the quasi-linear nature of the coastline. Consequently, estimating sub-daily NTOAL is necessary to properly account for such a signal that can be 3.5 times larger than its daily-averaged value. We were unable to detect the deformation signal in 2-hourly GPS processing and show that seasonal noise in the Austral summer dominates and precludes GPS detection of the cyclone-related subsidence.     

Generation of Vegetation Fraction and Surface Albedo Products Over India from Ocean Colour Monitor (OCM) Data Onboard Oceansat-2

The use of Local Area Coverage (LAC) data from Ocean Color Monitor (OCM) sensor of Oceansat-2 with its high radiometric resolution (12 bits/pixel) and 2-day repeat cycle for rapid monitoring of vegetation growth and estimating surface albedo for the Indian region is demonstrated in this study. For the vegetation monitoring, normalized difference vegetation index (NDVI) and vegetation fraction (VF) products were estimated by maximum value composite approach fortnightly and were resampled to 1 km. The surface albedo products were realized by converting narrow-band eight-band spectral reflectance OCM data to a) visible (300–700 nm) and b) broad band (300–3,000 nm) data. For validation, the derived products were compared with respective MODIS global products and found to be in good agreement.     

Earth observations during space shuttle flight STS‐41: Discovery's mission to planet earth

Abstract

Multi‐temporal ERS‐1 SAR data acquired over a large agricultural region in West Bengal was used to classify kharif crops like rice, jute and sugarcane. Rice crop grown under lowland management practice showed a temporal characteristic. The dynamic range of backscatter was highest for this crop in temporal SAR data. This was used to classify rice using temporal SAR data. Such temporal character was not observed for the other study crops, which may be due to the difference in cultivation practice and crop calendar. Significant increase in backscatter from the ploughed fields was used to derive information on onset and duration of land preparations. Synergistic use of optical remote sensing data and SAR data increased the separability of rice crop from homesteads and permanent vegetation classes.     

NEW METHODS OF COMPILING GENERAL REFERENCE MAPS IN ATLAS CARTOGRAPHY

Measures to improve the effectiveness and informational content of general reference maps and other materials in atlases designed for the general public are outlined. Emphasis is placed upon (a) enhancing the readability and visual appeal of color “landscape” maps, providing a generalized, small-scale aerial view of the region(s) of interest–this through the application of principles of perception and colorimetry–and (b) developing larger-scale “reference” maps maximizing levels of graphic detail without jeopardizing ease of perception–this based on a careful study of general reference maps in atlases worldwide and broadly based testing of users with various levels of map reading skills. Translated from: Izvestiya vysshykh uchebnykh zavedeniy: Geodeziya i aerofotos'yemka, 1985, No. 6, pp. 111-115.     

THE PRESENT STATE OF ECOSYSTEMS IN MONGOLIA: PRINCIPLES OF EVALUATION AND MAPPING

This paper explores how such characteristics as the polarization of reflected radiation, the angular characteristics of its reflectance, and its thermal properties can be used to supplement conventional remote sensing studies of the condition of the vegetation cover. One possible application is clarified by means of an experiment testing the relationship between the degree of polarization of radiation reflected from cultivated cotton fields and the condition of the crop in those fields. Empirical data demonstrate that changes in the geometric structure of (and reflectance from) fields occurs when cultivated plants are subjected to stress (disease or moisture deprivation). Translated by Edward Torrey, Alexandria, VA 22308 from: L. N. Vasil'yev, ed., Kosmicheskiye metody izucheniya biosfery [Remote Sensing Methods in the Study of the Biosphere]. Moscow: Nauka, 1990, pp. 77–82.     

From data to decision-making – experiences in Integrated Earth Observation (IEO)

Within the confines of Earth Observation Scientific Knowledge and Technology Transfer in Hungary (EKAT) titled ESA PECS project we gained forum for utilization of our earth observation (EO) knowledge and possibility for further development of experiences. The project aims the horizontal preparation of Hungary for ESA membership – for a dynamically developing sphere in the common part of science, technology and business. For the efficient transfer and dissemination, we preconceived target groups and principles to reach main take-up points and to open new forums of information exchange. Nowadays, user-friendly service, complex supply and real-validation process all have great importance. Joining units of suitable data choice, entire ingestion–processing chains and ergonomic interfaces can only offer a timely and professional solution for the challenges of industry and business sectors. It has to be clearly seen, that information and communication technologies (ICT) and information control becomes a more and more significant part of EO services.