Evaluation of MIVIS Hyperspectral Data for Mapping Soil Degradation in an Upland Ecosystem of Southern Italy

Abstract

This paper describes the first stage of an experiment aiming to evaluate the potential and limitations of MIVIS data for mapping the degradational state of soils in a sub‐scene of a southern Apennines study area (Italy). After radiometric rectification of the image data and the collection of a field/laboratory spectral library, linear spectral mixture modelling (SMA) was used to decompose image spectra into fractions of spectrally distinct mixing components. Spectral endmember selection was based upon a principal component analysis (PCA) applied to a set of soil spectra, collected from the spectral library. The resulting abundance estimates (fractions) trough SMA were then analysed to identify soil conditions and to obtain an improved measure of dry and green vegetation cover. A map of soil conditions and dry‐green vegetation abundance, based upon MIVIS data was then derived from normalised fractions of soil‐vegetation endmembers obtained from SMA.     

Multi‐sensor Image Maps from SPOT,ERS and JERS

Abstract

Image mapping using data from visible and infrared sensors has, as a major drawback, the frequent cloud cover experienced in many countries. This is one of the main reasons why topographic maps at 1:100,000 scale and larger are often outdated. The results of a study which investigated the possibilities of fusing up‐to‐date spaceborne microwave data with existing images from optical sensors for topographic map updating at a scale of 1:100, 000 are presented in this paper. A key issue researched was the influence of geometric distortions and corrections of remote sensing data on the results of pixel based digital image fusion. After having terrain‐geocoded and radiometrically enhanced imagery from the Landsat, SPOT, ERS‐1 and JERS‐1 satellites, the data were fused applying a variety of colour transformation techniques as well as statistical or arithmetic methods. Initially, the image fusion was implemented using images covering a test site in the north of The Netherlands in order to calibrate specified combinations and techniques in a rather flat area. With the experience gained, the remote sensing data acquired over the research site were processed. The research test site is located in a typical Developing Country in the humid Tropics, on the mountainous south‐west coast of Sumatra in Indonesia. The results of the various applied techniques and image combinations were evaluated with reference to their capability to overcome the cloud cover problem. New combinations of techniques and images were developed as result of an optimisation process. The research produced two prototypes of annotated 1:100,000 scale image maps containing fused, cloud‐free optical/microwave imagery.     

Multi‐Season Atmospheric Normalization of NOAA AVHRR Derived NDVI for Crop Yield Modeling

Abstract

A methodology has been developed to normalize the multi‐temporal NDVIs derived from NOAA AVHRR data for the atmospheric effects to the least affected NDVI for development of spectral and spectrometeorological (or spectromet, for short) crop yield models. This is found to reduce the noise in NDVI due to varying atmospheric conditions from season to season and improve the predictability of statistical multiple linear regression yield models. The spectromet yield models for mustard crop in the nine districts of Rajasthan state haven been developed based on normalized NDVIs and have been validated by comparing the predicted yields with the estimated from crop cutting experiments by the state Development of Agriculture.     

Recent literature in cartography and geographic information science

Tissot's Indicatrix and regular grids have been used for assessing map projection accuracies. Despite their broad applicability for accuracy assessment, they have limitations in quantifying resampling errors caused by map projections. This is due to the structural uncertainty with regard to the placement and pattern of grids. It is also difficult to calculate the absolute amount of resampling error in each projection. As an alternative to traditional testing methods, the use of random points was investigated. Specifically, random point generation, resampling with spherical block search algorithms, resampling accuracy with a perfect grid, and resampling accuracy with eight projections were investigated and are discussed here. Eight global referencing methods were tested: the equal-area cylindrical, sinusoidal, Mollweide, Eckert IV, Hammer-Aitoff, interrupted Goode homolosine, integerized sinusoidal projections, and the equal area global gridding with a fixed latitudinal metric distance. The resampling accuracy with a perfect grid is about 75 percent. Results showed the sinusoidal and the integerized sinusoidal projections and equal-area global gridding to achieve the highest accuracies.     

Graph theory for analyzing pair-wise data: application to geophysical model parameters estimated from interferometric synthetic aperture radar data at Okmok volcano,Alaska

Graph theory is useful for analyzing time-dependent model parameters estimated from interferometric synthetic aperture radar (InSAR) data in the temporal domain. Plotting acquisition dates (epochs) as vertices and pair-wise interferometric combinations as edges defines an incidence graph. The edge-vertex incidence matrix and the normalized edge Laplacian matrix are factors in the covariance matrix for the pair-wise data. Using empirical measures of residual scatter in the pair-wise observations, we estimate the relative variance at each epoch by inverting the covariance of the pair-wise data. We evaluate the rank deficiency of the corresponding least-squares problem via the edge-vertex incidence matrix. We implement our method in a MATLAB software package called GraphTreeTA available on GitHub (https://github.com/feigl/gipht). We apply temporal adjustment to the data set described in Lu et al. (Geophys Res Solid Earth 110, 2005) at Okmok volcano, Alaska, which erupted most recently in 1997 and 2008. The data set contains 44 differential volumetric changes and uncertainties estimated from interferograms between 1997 and 2004. Estimates show that approximately half of the magma volume lost during the 1997 eruption was recovered by the summer of 2003. Between June 2002 and September 2003, the estimated rate of volumetric increase is \((6.2 \, \pm \, 0.6) \times 10^6~\mathrm{m}^3/\mathrm{year} \). Our preferred model provides a reasonable fit that is compatible with viscoelastic relaxation in the five years following the 1997 eruption. Although we demonstrate the approach using volumetric rates of change, our formulation in terms of incidence graphs applies to any quantity derived from pair-wise differences, such as range change, range gradient, or atmospheric delay.     

Landscape transform and spatial metrics for mapping spatiotemporal land cover dynamics using Earth Observation data-sets

Analysis of Earth observation (EO) data, often combined with geographical information systems (GIS), allows monitoring of land cover dynamics over different ecosystems, including protected or conservation sites. The aim of this study is to use contemporary technologies such as EO and GIS in synergy with fragmentation analysis, to quantify the changes in the landscape of the Rajaji National Park (RNP) during the period of 19 years (1990–2009). Several statistics such as principal component analysis (PCA) and spatial metrics are used to understand the results. PCA analysis has produced two principal components (PC) and explained 84.1% of the total variance, first component (PC1) accounted for the 57.8% of the total variance while the second component (PC2) has accounted for the 26.3% of the total variance calculated from the core area metrics, distance metrics and shape metrics. Our results suggested that notable changes happened in the RNP landscape, evidencing the requirement of taking appropriate measures to conserve this natural ecosystem.     

Optimization of spatial statistical approaches to identify land use/land cover change hot spots of Pune region of Maharashtra using remote sensing and GIS techniques

This study investigated land use/land cover change (LULCC) dynamics using temporal satellite images and spatial statistical cluster analysis approaches in order to identify potential LULCC hot spots in the Pune region. LULCC hot spot classes defined as new, progressive and non-progressive were derived from Gi* scores. Results indicate that progressive hot spots have experienced high growth in terms of urban built-up areas (20.67% in 1972–1992 and 19.44% in 1992–2012), industrial areas (0.73% in 1972–1992 and 3.46% in 1992–2012) and fallow lands (4.35% in 1972–1992 and ?6.38% in 1992–2012). It was also noticed that about 28.26% of areas near the city were identified as new hot spots after 1992. Hence, non-significant change areas were identified as non-progressive after 1992. The study demonstrated that LULCC hot spot mapping through the integrated spatial statistical approach was an effective approach for analysing the direction, rate, spatial pattern and spatial relationship of LULCC.     

A comparative analysis of pansharpening techniques on QuickBird and WorldView-3 images

Nowadays, different image pansharpening methods are available, which combine the strengths of different satellite images that have different spectral and spatial resolutions. These different image fusion methods, however, add spectral and spatial distortions to the resultant images depending on the required context. Therefore, a careful selection of the fusion method is required. Simultaneously, it is also essential that the fusion technique should be efficient to cope with the large data. In this paper, we investigated how different pansharpening algorithms perform, when applied to very high-resolution WorldView-3 and QuickBird satellite images effectively and efficiently. We compared these 27 pansharpening techniques in terms of quantitative analysis, visual inspection and computational complexity, which has not previously been formally tested. In addition, 12 different image quality metrics available in literature are used for quantitative analysis purpose.     

Analysis of urban built-up areas and surface urban heat island using downscaled MODIS derived land surface temperature data

Regional scale urban built-up areas and surface urban heat islands (SUHI) are important for urban planning and policy formation. Owing to coarse spatial resolution (1000 m), it is difficult to use Moderate Resolution Imaging Spectroradiometer (MODIS) Land surface temperature (LST) products for mapping urban areas and visualization, and SUHI-related studies. To overcome this problem, the present study downscaled MODIS (1000 m resolution)-derived LST to 250 m resolution to map and visualize the urban areas and identify the basic components of SUHI over 12 districts of Punjab, India. The results are compared through visual interpretation and statistical procedure based on similarity analysis. The increased entropy value in the downscaled LST signifies higher information content. The temperature variation within the built-up and its environs is due to difference in land use and is depicted better in the downscaled LST. The SUHI intensity analysis of four cities (Ludhiana, Patiala, Moga and Vatinda) indicates that mean temperature in urban built-up core is higher (38.87 °C) as compared to suburban (35.85 °C) and rural (32.41 °C) areas. The downscaling techniques demonstrated in this paper enhance the usage of open-source wide swath MODIS LST for continuous monitoring of SUHI and urban area mapping, visualisation and analysis at regional scale. Such initiatives are useful for the scientific community and the decision-makers.     

无定向点的碎部测量方法

提出一种在测站没有定向点的情况下,利用全站仪进行碎部测量的作业方法,阐述该方法的作业过程、精度情况和注意事项,为解决全野外数字测图过程中经常遇到的由于控制点无通视方向而影响碎部测量作业的问题提供了有效途径。