Performance analysis of the spaceborne laser ranging system

The Spaceborne Laser Ranging System is a proposed short pulse laser on board an orbiting spacecraft.^1,2,3,4 It measures the distance between the spacecraft and many laser retroreflectors (targets) deployed on the Earth’s surface. The precision of these range measurements is assumed to be about ±2 cm (M. W. Fitzmaurice, private communication). These measurements are then used together with the orbital dynamics of the spacecraft, to derive the relative position of the laser ground targets. Assuming a six day observing period with 50% cloud cover, uncertainties in the baseline for target separations of 50 km to 1200 km were estimated to be on the order of 1 to 3 cm and the corresponding values in the vertical direction, ranged from 1 cm to 12 cm. By redetermining the measurements of the relative target positions, the estimated precision in the baseline for a target separation of 50 km is less than 0.3 cm and for a separation of 1200 km is less than 1 cm. In the vertical direction, the estimated precision ranged from 0.4 cm to 4.0 cm respectively. As a result of the repeated estimation of the relative laser target positions, most of the non-temporal effects of error sources as exemplified by the errors in geopotential are reduced. The Spaceborne Laser Ranging System’s capability of determining baselines to a high degree of precision provides a measure of strain and strain rate as shown byCohen, 1979. These quantities are essential for crustal dynamic studies which include determination and monitoring of strain near seismic zones, land subsidence, and edifice building preceding volcanic eruptions. It is evident that such a system can also be used for geodetic surveys where such precisions are more than adquate.     

3D segmentation of single trees exploiting full waveform LIDAR data

This paper highlights a novel segmentation approach for single trees from LIDAR data and compares the results acquired both from first/last pulse and full waveform data. In a first step, a conventional watershed-based segmentation procedure is set up, which robustly interpolates the canopy height model from the LIDAR data and identifies possible stem positions of the tallest trees in the segments calculated from the local maxima of the canopy height model. Secondly, this segmentation approach is combined with a special stem detection method. Stem positions in the segments of the watershed segmentation are detected by hierarchically clustering points below the crown base height and reconstructing the stems with a robust RANSAC-based estimation of the stem points. Finally, a new three-dimensional (3D) segmentation of single trees is implemented using normalized cut segmentation. This tackles the problem of segmenting small trees below the canopy height model. The key idea is to subdivide the tree area in a voxel space and to set up a bipartite graph which is formed by the voxels and similarity measures between the voxels. Normalized cut segmentation divides the graph hierarchically into segments which have a minimum similarity with each other and whose members (= voxels) have a maximum similarity. The solution is found by solving a corresponding generalized eigenvalue problem and an appropriate binarization of the solution vector. Experiments were conducted in the Bavarian Forest National Park with conventional first/last pulse data and full waveform LIDAR data. The first/last pulse data were collected in a flight with the Falcon II system from TopoSys in a leaf-on situation at a point density of 10 points/m². Full waveform data were captured with the Riegl LMS-Q560 scanner at a point density of 25 points/m² (leaf-off and leaf-on) and at a point density of 10 points/m² (leaf-on). The study results prove that the new 3D segmentation approach is capable of detecting small trees in the lower forest layer. So far, this has been practically impossible if tree segmentation techniques based on the canopy height model were applied to LIDAR data. Compared to a standard watershed segmentation procedure, the combination of the stem detection method and normalized cut segmentation leads to the best segmentation results and is superior in the best case by 12%. Moreover, the experiments show clearly that using full waveform data is superior to using first/last pulse data.     

Space based disaster management of 2008 Kosi floods,North Bihar,India

One of the most important elements in flood disaster management is the availability of timely information for taking decisions and actions by the authorities. During the August 18, 2008 Kosi floods which impacted India and Nepal and affected more than three million people, aero-space technology proved to be a critical input for providing vital information on flood inundation. The satellite based flood inundation maps were extensively used for identifying marooned villages, submerged roads and railway tracks and carrying out the relief and rescue operations by the state agencies. Decision Support Centre (DSC) at National Remote Sensing Centre (NRSC) kept a constant watch on the flood situation. More than 200 flood inundation maps, using about 30 satellite datasets were generated and provided in near real time mode to the state agencies during August to October, 2008. DSC efforts were primarily focused in providing an overall picture of the flood situation in a short span of time to the state agencies. The present paper discusses about the operational use of remote sensing technology for near real time flood mapping, monitoring of Kosi floods and the satellite based observations made for the Kosi river breach.     

Ridge development as revealed by sub-bottom profiles on the central New Jersey shelf

Closely-spaced 3.5 kHz seismic profiles were collected over the north-easterly trending ridge and swale system 50 km east-southeast of Atlantic City, New Jersey. They yield information on the Late Quaternary depositional history of the area, and on the origin of the ridge system. Four of the sub-bottom reflectors identified were sufficiently persistent to warrant investigation and interpretation. These reflectors, which have been cored, lithologically identified, and radiocarbon dated, are stratigraphically higher than the reflectors dealt with by the majority of previous studies. The upper three reflectors are definitely mid- and post-Wisconsin in age and present a record of the most recent glacial cycle. The upper three units associated with the observed reflectors appear to exert a pronounced influence on the bathymetry. The gently corrugated ridge system of Holocene sand is formed over the regionally flat-lying upper unit, an Early Holocene lagoonal silty clay. The characteristically flat, broad depressions of the area are floored by this lagoonal material. Locally, however, marine scour has cut through the silty clay into an underlying unit of unconsolidated fine Pleistocene sand. Several stages of trough development appear to be represented. After penetrating the lagoonal clay, troughs are initially narrow, but when incised through the sand into a lower, Pleistocene, silty-clay unit, the troughs become notably wider. As downcutting is inhibited by the lower clay, the upper clay is undercut as the trough widens in a fashion similar to a desert blowout.

The sub-bottom reflectors indicate that ridge development on the central shelf has involved aggradation as well as erosion. Some ridges seem to have grown by vertical and lateral accretion from small cores. The internal structure of other ridges suggests that they formed by the coalescence of several small ridges. Others appear to have undergone appreciable lateral migration.

The ridges appear to be in a state of continuing adjustment to the hydraulic regime of the deepening post-Pleistocene water column.     

The estimation of acid dissociation constants in seawater media from potentionmetric titrations with strong base. I. The ionic product of water — Kw

The various assumptions implicit in the calculation of acid dissociation constants (based on ionic medium standard states) from potentiometric titrations using a cell with liquid junction (i.e. a pH measuring cell) have been examined. It was concluded that results can be obtained having an accuracy commensurate with the experimental precision. It has been shown that although the precise composition of the medium is a function of the hydrogen ion concentration (because of the protolytic nature of some of the ions in the media, e.g., sulphate and fluoride), the effect of such variations in the medium composition can be compensated for when defining the activity of hydrogen ion on an ionic medium standard state by defining the concentration of hydrogen ion as:

where β_HSO4 and β_HF are the relevant association constants and S_T and F_T are the total concentrations of sulphate and fluoride, respectively.This approach was used to obtain values for the ionic product of water (K_W) in artificial seawater media at various temperatures and ionic strengths. These were fitted to give the equation (molal concentration units):

$\text{pK}{}_{\mathrm{w}}\text{=}\text{3441.0}\text{T}\text{+2.256-0.7091}{}^{\mathrm{<mtext>1</mtext><mtext>2</mtext>}}\text{(}\text{rms deviation 0.01}\text{)}$

where I is the formal ionic strength of the artificial seawater medium and T is the absolute temperature. The values obtained are in reasonable agreement with those found by previous workers.     

Sur l'existence d'une topographie antérécifale dans la région de Tuléar (côte sud ouest de Madagascar)

The outline of the Pleistocene coastal geomorphology in the Tuléar area (Madagascar) can be redrawn from the analysis of the setting and characteristics of present-day coral reefs. Initial outer reef tracts, which grew in Tatsimian times (according to Battistini's terminology), followed in their development the river pattern, since they settled upon the divides between valleys instead of growing uniformly on the outer shelf. These primary reef chains coalesced subsequently. Inner reefs and coral banks also followed, although not so closely, the river pattern.     

Structure and development of the southern Moroccan continental shelf

The structure of the continental shelf off southern Morocco was studied by means of 2,100 km of seismic reflection profiles, magnetic and bathymetric surveys, and dredge samples. The research area lies off four geologic divisions adjacent to the coast: the Atlas Mountains; the Souss Trough; the Anti-Atlas Mountains; and the Aaiun Basin. The continental shelf, along with the western Atlas Mountains, the western Souss Trough, and the entire Aaiun Basin, has subsided along a normal fault-flexure system. This system runs along the shore at the Anti-Atlas Mountains, and cuts off this cratonic block from the shelf subsidence. The shelf is narrow and characterized by out-building off the Anti-Atlas range, whereas it is broader and characterized by upbuilding to the north and south. Deposition was essentially continuous at least from Early Cretaceous through Eocene time. Published work suggests that the last cycle of sedimentation began during Permian rifting. After Eocene time, most sediments carried to the shelf must have bypassed it and gone to construct the slope and rise or to the deep sea. Tertiary orogenies caused extensive folding of Mesozoic and early Tertiary deposits off the Atlas Mountains.     

Studies on the determination of inorganic iodine in seawater

Existing methods for the determination of the various forms of iodine present in seawater are laborious or unwieldy in use. This paper describes modified forms of the iodate and total iodine methods described by Barkley and Thompson (1960), a spectrophotometric procedure for iodate determination derived from Johannesson's (1958) work, and an automatic method for total iodine determination. Procedures for iodate and total-iodine determination which are suitable for use aboard ship, are recommended. Both procedures for iodate determination returned a standard deviation close to 0.5 μg/l when several replicate samples of a seawater containing approximately 30 μg/l of iodate-iodine were analysed. The automatic method for total iodine determination yielded a standard deviation of 0.8 μg/l by the repeated analysis of a seawater containing a total of approximately 50 μg/l of iodine. Suitable methods for the filtration and storage of seawater are also described.     

Dives into outer Coronado Canyon System

Dives in Lockheed's submarine “Deep Quest” followed the floor of the fan valley and outer gorge of Coronado Canyon, southwest of the California—Baja California border. Both the fan valley and outer gorge have meandering courses. Basin depressions and intermittent steep descents characterize the outer gorge. No indications were found of recent activity of turbidity currents at either location, but a sand layer 30 cm below the surface is interpreted as related to a lower stand of sea level at the close of the last ice age. Abundant organisms were seen on the valley floor and in the overlying water.