Diversity and Habitat Distribution of Birds in Coastal Marshes and Comparisons with Surrounding Upland Habitats in Southeastern South America

We studied variation in bird assemblages with plant associations for three different coastal marshes from Southeastern South America (SESA) and assessed how marsh bird assemblages related to nearby upland bird assemblages. We surveyed bird species and plant structure along the tidal gradient of each locality from the low tide level to the upper habitats bordering coastal marshes. Twenty species frequently used coastal marshes, including relatively few migratory species. We found that birds occurring in SESA coastal marshes do not have distributions constrained to coastal marshes. Nonetheless, four bird assemblages were recognized in association with vegetation types and/or sites. Among the recorded coastal marsh species, the bay-capped wren-spinetail (Spartonoica maluroides) is both the most frequent and the most habitat constrained. Bird richness increases steadily along the tidal gradient associated with the increase in vegetation structure, suggesting that bird richness is directly explained by vegetation and indirectly by the physical conditions influencing vegetation structure. Results highlight the importance of SESA middle marshes as habitat for conservation of some threatened SESA grassland birds.     

Building a 3D geomodel for water resources management: case study in the Regional Park of the lower courses of Manzanares and Jarama Rivers (Madrid, Spain)

Water resources management of protected sites requires a powerful tool to analyze the process and changes that are occurring in the environment. This paper describes a 3D geomodel design of the Jarama River Detrital Aquifer located in Madrid (Spain). That hydrogeological unit is included in the “Parque Regional de los Cursos Bajos de los Ríos Manzanares y Jarama” (Regional Park of the Lower Courses of Manzanares and Jarama Rivers). The goal of this work is to define a method by which a three-dimensional (3D) model can be created with hydrogeologic geometry real of main aquifer, to accomplish an adequate management of the groundwater resources. All data used in this study were integrated in a geographic database: geological and hydrogeological information, geological map (1:25,000), eleven cross-sections, piezometric maps and a digital elevation model. The constructed 3D model of the Jarama Aquifer shows geometric features and spatial distribution and variations of geologic units. Thus, the 3D model allows the assessment of volumes of each unit, the depth and thickness variations of the main aquifer, and the spatial and temporal variations of water tables. From the 3D model, the most suitable areas (in terms of groundwater protection) for managed recharge and mining works have been identified.     

Magnetic susceptibility and electrical conductivity as a proxy for evaluating soil contaminated with arsenic,cadmium and lead in a metallurgical area in the San Luis Potosi State,Mexico

A total of 113 samples of waste and soil were collected from a site in the state of San Luis Potosi, Mexico, that was occupied for several years by the metallurgical industry. Specific magnetic susceptibility (MS), electrical conductivity (EC) and pH were determined, as well as the total and available concentrations of potentially toxic elements (PTEs) such as As, Cd, Cu, Fe, Pb and Zn, which may cause a health risk for humans, animals and ecosystems, and the concentrations of major ions in aqueous extracts of soils and wastes. The solid phases of the samples were also characterized. The results revealed that the soils and wastes exhibited elevated values of PTEs, MS and EC. For soils these values decreased with increasing distance from the waste storage sites. The MS values were elevated primarily due to the presence of Fe-oxyhydroxides, such as magnetite, hematite and goethite, which contain PTEs in their structure leading to a high correlation between the value of MS and the As, Cd, Fe and Pb contents (r = 0.57–0.91) as well as between the PTEs values (r = 0.68–0.92). The elevated EC values measured in the metallurgical wastes were the result of presence of the sulfate minerals of Ca, Mg and Fe. The pollution index, which indicates the levels of simultaneous toxicity from elements such as As, Cd and Pb, was determined, with extreme hazard zones corresponding to areas that exhibit high MS values (0.91 correlation). In conclusion, MS measurements can be used as an indirect indicator to evaluate the PTE contamination in metallurgical areas, and EC measurements can aid in the identification of pollution sources.     

A software solution for point counting. Petrographic thin section analysis as a case study

In the field of geology, as in many other fields, a common problem is the analysis of 2D sections. An example of this is the petrographic study of rock samples, i.e., the quantification of its mineral components and the percentages of each phase present in it. Conventionally, this quantification has been determined by point counting performed on thin sections. Although point counting is very time consuming, it is of common use in several domains including geology, biology, medicine, and materials sciences, among others. Point counting in thin sections is normally conducted through mechanical or electromechanical devices attached to a microscope; such devices are very expensive, offer limited functionality, and are very time consuming. In this contribution, we introduce an interactive visualization application called Rock.AR that reduces the amount of time required to apply this technique and simplify its work flow. It provides visual tools like distortion techniques, overview + detail, and statistics to assist the technique. A comparison between this application and similar tools through users' experiences is provided. We compare the time it takes to complete a session of point counting and the tools' usability.     

Scales and causes of heterogeneity in bars in a large multi‐channel river: Río Paraná, Argentina

To date, published studies of alluvial bar architecture in large rivers have been restricted mostly to case studies of individual bars and single locations. Relatively little is known about how the depositional processes and sedimentary architecture of kilometre‐scale bars vary within a multi‐kilometre reach or over several hundreds of kilometres downstream. This study presents Ground Penetrating Radar and core data from 11, kilometre‐scale bars from the Río Paraná, Argentina. The investigated bars are located between 30 km upstream and 540 km downstream of the Río Paraná – Río Paraguay confluence, where a significant volume of fine‐grained suspended sediment is introduced into the network. Bar‐scale cross‐stratified sets, with lengths and widths up to 600 m and thicknesses up to 12 m, enable the distinction of large river deposits from stacked deposits of smaller rivers, but are only present in half the surface area of the bars. Up to 90% of bar‐scale sets are found on top of finer‐grained ripple‐laminated bar‐trough deposits. Bar‐scale sets make up as much as 58% of the volume of the deposits in small, incipient mid‐channel bars, but this proportion decreases significantly with increasing age and size of the bars. Contrary to what might be expected, a significant proportion of the sedimentary structures found in the Río Paraná is similar in scale to those found in much smaller rivers. In other words, large river deposits are not always characterized by big structures that allow a simple interpretation of river scale. However, the large scale of the depositional units in big rivers causes small‐scale structures, such as ripple sets, to be grouped into thicker cosets, which indicate river scale even when no obvious large‐scale sets are present. The results also show that the composition of bars differs between the studied reaches upstream and downstream of the confluence with the Río Paraguay. Relative to other controls on downstream fining, the tributary input of fine‐grained suspended material from the Río Paraguay causes a marked change in the composition of the bar deposits. Compared to the upstream reaches, the sedimentary architecture of the downstream reaches in the top ca 5 m of mid‐channel bars shows: (i) an increase in the abundance and thickness (up to metre‐scale) of laterally extensive (hundreds of metres) fine‐grained layers; (ii) an increase in the percentage of deposits comprised of ripple sets (to >40% in the upper bar deposits); and (iii) an increase in bar‐trough deposits and a corresponding decrease in bar‐scale cross‐strata (<10%). The thalweg deposits of the Río Paraná are composed of dune sets, even directly downstream from the Río Paraguay where the upper channel deposits are dominantly fine‐grained. Thus, the change in sedimentary facies due to a tributary point‐source of fine‐grained sediment is primarily expressed in the composition of the upper bar deposits.     

Molecular gas in young planetary nebulae

We review our recent results concerning the molecular gas content of young planetary nebulae NGC 2346, M 2–9, and NGC 6720 (the Ring Nebula in Lyra).Paper presented at the 11th European Regional Astronomical Meetings of the IAU on New Windows to the Universe, held 3–8 July, 1989, Tenerife, Canary Islands, Spain.     

The challenge of dating early pleistocene fossil teeth by the combined uranium series–electron spin resonance method: the Venta Micena palaeontological site (Orce,Spain)

The palaeontological site of Venta Micena (Orce, Andalusia, Spain) lies in the eastern sector of the Guadix–Baza basin, one of the best documented areas in Europe for Plio‐Pleistocene biostratigraphy. The combination of biochronological and palaeomagnetic results, combined with the radiometric data obtained for Atapuerca Sima del Elefante, indicated that the Venta Micena stratum was formed between the Jaramillo and Olduvai palaeomagnetic events, most likely between 1.22 and 1.77 Ma. Five fossil teeth from two outcrops (sites A and B) were selected to assess the potential of combined uranium series–electron spin resonance (US‐ESR) dating of Early Pleistocene sites. Although the US‐ESR results of the first outcrop showed a large scatter between the three teeth, the mean age of 1.37 ± 0.24 Ma can be considered a reasonable age estimate for Venta Micena. The mean ESR age of 0.62 ± 0.03 Ma obtained for site B seems to be a severe underestimation when compared with the independent age control. This underestimation is attributed to a relative recent U‐mobilization event that led to some U‐leaching. The results show that any ESR age calculations of old samples are extremely sensitive to variations in the measured ²³⁰Th/²³⁴U ratios in dental tissues. Although the results demonstrate that ESR can in principle be applied to Early Pleistocene sites, they also reveal the complexity of dating such old teeth. It is necessary to continue research in several directions, such as study of the behaviour of ESR signals in old teeth and understanding recent U‐mobilization processes, to improve the reliability of the combined US‐ESR dating method applied to Early Pleistocene times, a period for which the number of available numerical dating techniques is very limited. Copyright © 2011 John Wiley & Sons, Ltd.     

High-resolution seismic stratigraphy of the late Neogene of the central sector of the Colombian Pacific continental shelf: A seismic expression of an active continental margin

The sedimentary prism of the central Pacific continental shelf of Colombia was affected by regional folding and faulting, and probably later mud diapirism, from the Late Miocene to the Holocene. Interpretation of high-resolution seismic lines (2 s/dt) revealed that the prism consists of 13 high-resolution seismic units, that can be separated into 5 seismic groups.Deposition of the prism and the associated stacking pattern, are probably the response to variable uplift and subsidence in a fore-arc basin that underwent important tectonic events by the end of the Miocene. Throughout the Pliocene, the continental shelf sedimentation was affected by the growing of a dome structure probable due to mud diapirism. This fact caused peripheral faults both normal and reverse that controlled the distribution of some of the seismic units. During the Late Pleistocene (Wisconsin stage?) a eustatic sea level fall caused the shoreline to advance about 50 km westward of its present position. Because of this eustatic sea level change, a strong fluvial dissection took place and is interpreted as the probable extension of the San Juan River to the south of the present day river mouth. Within this framework it is believed that the Malaga and Buenaventura Bays were the passageways of branches of the old drainage system of the San Juan River. The inner branch circulated through the present Buenaventura Bay and runs southward leaving the mark of an apparent valley identified in the seismic information in the eastern sector of the study area. This old fluvial valley and its filling material located in the present day inner continental shelf front of Buenaventura are postulated as important targets to find placer minerals such as gold and platinum.     

Energy balance and evaporation loss of an irrigation reservoir equipped with a suspended cover in a semiarid climate (south‐eastern Spain)

The main objective of this study was to assess the impact of a suspended cover on the evaporation loss of an agricultural water reservoir (AWR). To this aim, a detailed data collection was carried out in a typical AWR located in south‐eastern Spain during 2 consecutive years. During the first year, the reservoir remained uncovered, while during the second year it was covered with a double black polyethylene (PE) shade cloth. On an annual scale, it was observed that the cover can provide a reduction of evaporation loss of 85%. Two approaches, energy balance and mass transfer, were used to analyse the effect of the cover on the evaporation process. Important modifications were observed on the magnitude, sign, annual trend and relative weight of the components of the energy balance. The changes were ascribed to the strong reduction of net radiation and to the substantial weight of the heat storage and sensible heat flux in the energy balance. A relevant finding was the contrast between the patterns of the annual evaporation curve for open‐water and covered conditions. The mass transfer approach allowed discriminating between the wind‐ and radiation‐shelter effects on the evaporation term. The reduction in water‐to‐air vapour deficit was the main factor explaining the high efficiency of the cover, whereas the reduction of the mass transfer coefficient was a modulating factor that accounted for the wind‐shelter effect. Overall, both approaches provided a sound basis to describe and explain the physical mechanisms underlying the high performance of the tested cover. Copyright © 2010 John Wiley & Sons, Ltd.