Petrogenesis of zincian spinel from mamandur base metal sulphide prospect,Tamil Nadu

Zincian spinels (gahnites) from the Mamandur Zn-Pb-Cu prospect of the Southern Granulite Terrain have been studied. Gahnites in the quartzofeldspathic gneiss occur either as (a) porphyroblastic grains closely in association with cordierite and sphalerite or as (b) inclusions in poikiloblastic quartz grains, restricted within quartz veinlets. Compositionally these gahnites belong to two different clusters corresponding to two modes of occurrences. The origin of the porphyroblastic gahnites is linked with the process of desulphidation of sphalerite whereas those occurring as inclusions within poikiloblastic quartz are direct crystallisation products from silica rich hydrothermal solution. A new compositional field for this latter group of gahnites is proposed here.     

Analysis of long-term ozone trend over Delhi and its meteorological adjustment

Present study deals with the statistical analysis of long-term ground level ozone (O₃) trend and the influence of meteorological variables on its variation over Delhi, India. Daily mean and maximum of O₃ and meteorological data, obtained from India Meteorological Department, were arranged for the period of 9 years (1998–2006). Based on the preliminary correlation study of all the data with O₃, six variables viz. daily maximum temperature, daily average relative humidity, dew point, wind speed, visibility, and total sunshine were selected. Classical additive time series decomposition technique was used to obtain seasonally adjusted long-term trend. To analyze the masking effect of meteorology, adjustment was made using Kolmogorov–Zurbenko filters followed by stepwise regression analysis to the smoothed series of O₃ maximum and meteorological variables, which showed that long-term trend was independent of sunshine duration. Results indicate a significant increasing trend with annual increase of 1.13 % for O₃ mean and 3 % for O₃ maximum. Annual deseasonalized trend for seasonal cycle shows bimodal oscillations. About 43 % of O₃ variation was explained by the selected meteorological factors and rest of variation attributed to factors like emission of precursor gases, pollutant transport, policy changes, etc. Among the three tested regression models, performance of Model 2 with variable temperature, wind speed, and visibility was found to be best that resulted in lowering of O₃ trend. Large variability (23 %) was explained by the variable visibility depicted that the emission of primary pollutants not only provides the precursor gases but also control the local photochemical reactions.     

Evidence for the thrust emplacement of the ‘Lesser Himalaya’ Chur granite,Himachal Pradesh

Numerous peraluminous and porphyritic granitic bodies and augen gneisses of granitic compositions occur in the nappe sequences of the Lower Himalaya. They are Proterozoic-to-lower Paleozoic in age and have been grouped into the ‘Lesser Himalaya granite belt’. The mode of emplacement and tectonic significance of these granites are as yet uncertain but they are generally considered to be sheet-like intrusions into the surrounding rocks. The small and isolated granite body (the Chur granite) that crops out around the Chur peak in the Himachal Himalaya is one of the more famous of these granites. Several lines of evidence have been adduced to show that the Chur granite has a thrust (the Chur thrust) contact with the underlying metasedimentary sequence (locally called the Jutogh Group). The Chur granite with restricted occurrence at the highest topographic and structural levels represents an erosional remnant of a much larger sub-horizontal thrust sheet. The contact relations between the country rocks and many of the other granite and granitic augen gneisses in the Lesser Himalaya belt are apparently similar to that of the Chur granite suggesting that at least some of them may also represent thrust sheets.     

Spatio‐temporal prediction of land surface temperature using semantic kriging

Spatio‐temporal prediction and forecasting of land surface temperature (LST) are relevant. However, several factors limit their usage, such as missing pixels, line drops, and cloud cover in satellite images. Being measured close to the Earth's surface, LST is mainly influenced by the land use/land cover (LULC) distribution of the terrain. This article presents a spatio‐temporal interpolation method which semantically models LULC information for the analysis of LST. The proposed spatio‐temporal semantic kriging (ST‐SemK) approach is presented in two variants: non‐separable ST‐SemK (ST‐SemK_NSep) and separable ST‐SemK (ST‐SemK_Sep). Empirical studies have been carried out with derived Landsat 7 ETM+ satellite images of LST for two spatial regions: Kolkata, India and Dallas, Texas, U.S. It has been observed that semantically enhanced spatio‐temporal modeling by ST‐SemK yields more accurate prediction results than spatio‐temporal ordinary kriging and other existing methods.     

Some regional indicators of the Tertiary–Quaternary geodynamics in the paleocoastal part of the Bengal basin (India)

Sedimentary processes in the paleocoastal part of the Bengal basin that occured in the Tertiary and Quaternary have been addressed. Three indicators were used: sedimentary bedding forms, microstructure of the sediment, and trace fossils. Various forms of sedimentary structures developed under the influence of dynamic geomorphic processes in the study area in the Quaternary. The microstructure analysis of the sedimentary materials was made by two methods: microphotography and Digital Color Analysis (DCA). The microstructure analysis shows that the geomorphic process remained very dynamic in the Quaternary, influencing the form, thickness, and mineral composition of the sediment strata. The enrichment of the sediments in heavy minerals evidences either oscillating or combined flow sedimentation, while under stable conditions light-mineral deposition took place. The digital data of microfabric study by the DCA method also show that larger particles deposited in the oscillating or high-flow environment and evidence a greater amount of heavy minerals like ferruginous materials. Trace fossils found in the sediments of this area also strongly support the concept that the environment remained dynamic during the Tertiary and Quaternary. The Late Tertiary deposition shows that, during these periods, the sediments were transported from tide-dominated marine coast with low flow energy, which is typical of hot and humid conditions. From Late Tertiary to Early Quaternary, the macrotidal coast became mesotidal (wave-dominated). The second phase is the Middle Pleistocene, when the environment was stable, favoring the continuous deposition of finer particles under low- to medium-flow energy conditions. The third phase, the Recent, is marked by the shoreline shift and modification of the environment. In the Early–Middle Holocene, the shoreline started to shift, which modified the geomorphic conditions of this place from coastal to estuarine and, finally, inland fluvial.     

Nonlinear kinetic analysis of phenol adsorption onto peat soil

Phenolic compounds are considered as a serious organic pollutant containing in many industrial effluents particularly vulnerable when the plant discharge is disposed on land. In the present study, the phenol removal potential of peat soil as adsorption media was investigated as the adsorption process are gaining popular for polishing treatment of toxic materials in industrial wastewater. Batch experiments were performed in the laboratory to determine the adsorption isotherms of initial concentrations for 5, 8, 10, 15, and 20 mg/L and predetermined quantity of peat soil with size ranges between 425 and 200 μm poured into different containers. The effects of various parameters like initial phenol concentration, adsorbent quantity, pH, and contact time were also investigated. From experimental results, it was found that 42 % of phenol removal took place with optimized initial phenol concentration of 10 mg/L, adsorbent dose of 200 g/L, solution pH 6.0 for the equilibrium contact time of 6 h. The result exhibits that pseudo-first-order (R ² = 0.99) and Langmuir isotherm models are fitted reasonably (R ² = 0.91). Adams–Bohart, Thomas, Yoon–Nelson, and Wolborska models were also investigated to the column experimental data of different bed heights to predict the breakthrough curves and to determine the kinetic coefficient of the models using nonlinear regression analysis. It was found that the Thomas model is the best fitted model to predict the experimental breakthrough curves with the highest coefficient of determination, R ² = 0.99 and lowest root mean square error and mean absolute performance error values.     

Felsic tuff from Rutland Island — A pyroclastic flow deposit in Miocene-sediments of Andaman-Java subduction complex

The bedded felsic tuff exposed in Rutland Island, Andaman, consists of two facies:

Formation of cracks due to moving source over a thick crust

Summary In this paper the problem of a point source of stress moving over the surface of a thick aelotropic plate resting of a rigid foundation has been considered. Following the method ofAleksandrov & Vorovich (1960) the stress componentsZ _x andZ _z have been expanded in series of ascending powers of 1/h when the source velocity is less than (c ₄₄/)^1/2. When the velocity exceeds (c ₄₄/)^1/2 it has been shown that two cracks are produced in different directions and their successive reflections at the upper and lower surface are also obtained.     

Deformation Modulus of Fly Ash Modified with Lime and Gypsum

Deformation modulus of fly ash is one of the most important mechanical properties generally used in different design problems and also as an input parameter to sophisticated numerical techniques employed to assess the response of different structures resting on fly ash fill or embankment made of fly ash. Deformation modulus is usually expressed in terms of compressive strength. This paper presents the deformation modulus of fly ash modified with lime alone or in combination with gypsum at different strain levels. The values of deformation modulus obtained from both unconfined compression test and unconsolidated undrained triaxial test results are presented herein. The specimens for unconfined compression test and for undrained triaxial tests were cured up to 90 and 28 days, respectively. The effects of addition of lime (4–10%) and gypsum (0.5 and 1.0%) on the deformation modulus of class F fly ash are highlighted. With addition of lime and gypsum, the class F fly ash achieved the deformation modulus in the range of 190 MPa in UCS test and up to 300 MPa in triaxial test specimens tested under all round pressure of 0.4 MPa. Based on the present test results empirical relationships are developed to estimate deformation modulus of modified fly ash from unconfined compressive strength and relationships between initial tangent modulus and secant modulus at different strain levels are also developed.     

Characterization of seafloor pockmark seepage of hydrocarbons employing fractal: A case study from the western continental margin of India

Here we apply quantitative technique to describe the seafloor seepages based on the multi-beam backscatter and bathymetric investigations to characterize the pockmark morphology. The variable seafloor backscatter strength for coarser seafloor sediments are related to the diagenesis derived from biodegraded seepages. In this regard, box counting method is used to estimate ‘fractal dimension’ for backscatter imagery data of 398 blocks. These blocks are further sub-grouped into six classes depending on the spread of pockmark related seepages. The study area lies 102 km west off Marmagao along the central west coast of India which contains pre-dominantly (70%) gas-charged sediments. Comparison between the estimated self-similar fractals reveals that there is approximately 97% correlation between the box (D_box) and information (D_info) dimensions. Box dimension–derived fractal dimension values, suggest that the seepages are more along the fault trace in deeper waters, in comparison to sparsely distributed shallow water seepages. Besides, this poor seepage is confined within the smooth to moderately rough seafloor. It is established that the high backscatter strength along the upper slope of the pockmark region having higher fractal dimensions reflects multifractal behavior of seepage distribution. Entire area indicates patchy seepage patterns as supported by estimated fractal values showing intermittent fluctuations, which emphasizes non-linear behavior. Estimated self organizing criticality (SOC) parameters for six representative blocks reveal that the nature of pockmark, fault trace, sediment nature coupled with slumping of pockmark’s wall, sediment movement due to bottom currents are controlling the dynamic balance in the area seepage system. Further, our study emphasizing the multifractal behavior of seepage blocks, clearly depicts the drift in the seepage pattern.