Cenozoic erosion and the preglacial uplift of the Svalbard–Barents Sea region

The creation of the huge fans observed in the western Barents Sea margin can only be explained by assuming extremely high glacial erosion rates in the Barents Sea area. Glacial processes capable of producing such high erosion rates have been proposed, but require the largest part of the preglacial Barents Sea to be subaerial. To investigate the validity of these proposals we have attempted to reconstruct the western preglacial Barents Sea. Our approach was to combine erosion maps based on prepublished data into a single mean valued erosion map covering the whole western Barents Sea and consequently use it together with a simple Airy isostatic model to obtain a first rough estimate of the preglacial topography and bathymetry of the western Barents Sea margin. The mean valued erosion map presented herein is in good volumetric agreement with the sediments deposited in the western Barents Sea margin areas, and as a direct consequence of the averaging procedures employed in its construction we can safely assume that it is the most reliable erosion map based on the available information. By comparing the preglacial sequences with the glacial sequences in the fans we have concluded that 1/2 to 2/3 of the total Cenozoic erosion was glacial in origin and therefore a rough reconstruction of the preglacial relief of the western Barents Sea could be obtained. The results show a subaerial preglacial Barents Sea. Thus, during interglacials and interstadials the area may have been partly glaciated and intensively eroded up to 1 mm/y, while during relatively brief periods of peak glaciation with grounded ice extending to the shelf edge, sediments have been evacuated and deposited at the margins at high rates. The interplay between erosion and uplift represents a typical chicken and egg problem; initial uplift is followed by intensive glacial erosion, compensated by isostatic uplift, which in turn leads to the maintenance of an elevated, and glaciated, terrain. The information we have on the initial tectonic uplift suggests that the most likely mechanism to cause an uplift of the dimensions and magnitude of the one observed in the Barents Sea is a thermal mechanism.     

Isoseismals of the strongest Friuli aftershocks of September 1976

Summary Isoseismal maps of the three strongest Friuli aftershocks of September 1976 were compiled using the contributions from European countries within the shaken area. The characteristic features of the macroseismic fields are discussed.     

Hydrography of the Santee River during moderate discharge conditions

To harness hydroelectric power, most of the flow of the Santee River, SC was diverted in 1942 into Charleston Harbor, where shoaling promptly became a major problem. For this reason, most of the diverted flow is scheduled to be rediverted to the Santee within the next decade, increasing the mean discharge of the Santee from 74 to 428 m³s^?1. To assess the present hydrogrpahy of the Santee estuary under conditions of moderate discharge, we determined 226 vertical profiles of velocity, salinity, and temperature distributed over 17 stations in February, 1975. We found that 73 and 27% of the discharge reached the ocean via the North and South distributaries, respectively. The 1 ppt isohaline was found no further than 8 km upstream from the mouth, indicating the limited extent of the estuarine zone. The Santee is a partially mixed estuary classified as type 2b. The circulation parameter is approximately 3 and the stratification parameter approximately 0.3. The bulk parameters indicate the importance of tidal, mixing and a weakly developed gravitational circulation. When rediversion is completed, the net salinity in the lower Santee River can be expected to decrease drastically, which in turn is likely to terminate the lucrative oyster and clam fishery.     

Partitioning of iron and magnesium between crystals and partial melts in peridotite upper mantle

The iron-magnesium distribution coefficient, $$K'_D = (X_{\Sigma {\text{FeO}}} /X_{{\text{MgO}}} )^{{\text{olivine}}} (X_{{\text{MgO}}} /X_{\Sigma {\text{FeO}}} )^{{\text{liquid}}} ,$$ has frequently been used as a means of testing whether experimental and natural silicate liquids could have been in equilibrium with olivine of mantle composition. It is shown here that this K′ _D decreases with increasing oxygen fugacity (xxx) for a hydrous partial melt in equilibrium with a natural spinel peridotite assemblage under pressure and temperature conditions corresponding to those of the upper mantle (from 0.52 at the xxx of the iron-wüstite buffer to 0.04 at the xxx of the magnetite-hematite buffer). K′ _D also increases with increasing pressure, with decreasing temperature, and probably with increasing Mg/(Mg+∑ Fe) of the parental peridotite, suggesting that $$K_D = (X_{{\text{FeO}}} /X_{{\text{MgO}}} )^{{\text{olivine}}} (X_{{\text{MgO}}} /X_{{\text{FeO}}} )^{{\text{liquid}}}$$ also increases with increasing pressure and decreasing temperature. Thus, unless these four variables (P, T, xxx, silicate composition) are known for a natural magma, K′ _D and probably K _D are variables, and the Mg/(Mg+∑ Fe) of such a magma cannot be correlated to that of the parent. The K _D determined at 1 atm pressure by Roeder and Emslie has frequently been used to test whether the Mg/(Mg+∑ Fe) ratios of experimentally formed liquids at high pressure in equilibrium with olivine of known Fo content represent the equilibrium Mg/(Mg+Fe²⁺) of this liquid, assuming that ∑Fe=Fe²⁺ and that K′ _D does not vary with P, T, and composition of the system. Published data demonstrate that the oxygen fugacities of the experimental designs employed by different laboratories vary between those of the magnetite-hematite and magnetite-wüstite buffers (6 orders of magnitude), resulting in K′ _D between 0.04 and 0.31 at 1050° C and 15 kbar, for example. Thus, published arguments as to whether the quenched liquids represent equilibrium compositions based on iron-magnesium partitioning are inadequate. The effects of P, T, xxx, and the composition of the starting material must also be considered.     

Pressure dependence of nickel partitioning between forsterite and aluminous silicate melts

Nickel partitioning between forsterite and aluminosilicate melt of fixed bulk composition has been determined at 1300°C to 20 kbar pressure. The value of the forsterite-liquid nickel partition coefficient is lowered from >20 at pressures equal to or less than 15 kbar to <10 at pressures above 15 kbar.Published data indicate that melts on the join Na₂O-Al₂O₃-SiO₂ become depolymerized in the pressure range 10–20 kbar as a result of Al shifting from four-coordination at low pressure to higher coordination as the pressure is increased. This coordination shift results in a decreasing number of bridging oxygens in the melt. It is suggested that the activity coefficient of nickel decreases with this decrease in the number of bridging oxygens. As a result, the nickel partition coefficient for olivine and liquid is lowered.Magma genesis in the upper mantle occurs in the pressure range where the suggested change in aluminum coordination occurs in silicate melts. It is suggested, therefore, that data on nickel partitioning obtained at low pressure are not applicable to calculation of the nickel distribution between crystals and melts during partial melting in the upper mantle. Application of high-pressure experimental data determined here for Al-rich melts to the partial melting process indicates that the melts would contain about twice as much nickel as indicated by the data for the low-pressure experiments. If, as suggested here, the polymerization with pressure is related to the Al content of the melt, the difference in the crystal-liquid partition coefficient for nickel at low and high pressure is reduced with decreasing Al content of the melt. Consequently, the change ofD_Ni^{ol-andesite melt} is greater than that ofD_Ni^{ol-basalt melt}, for example.     

Macroseismic observations of earthquake in Yugoslavia (April 15, 1979, 06h21m gmt), on the territory of Czechoslovakia

an¶rt;u am mu 15- an 1979. a auu a mumuu auu.     

Size and shape variation in the planktonic foraminiferHeterohelix striata (late cretaceous,southern Scandinavia)

The biserial planktonic foraminiferal species Heterohelix striata (Ehrenberg)has been analyzed by morphometric techniques from six sequential late Maestrichtian core samples from southern Sweden and one sample from the “Dania”quarry of Denmark. The study is based on measurements of number of chambers, size of test (length, width, and thickness),marginal angle, and chamber sizes. In addition, prolocular and apertural sizes were analyzed in the “Dania”quarry sample. The study includes analyses of the ontogenetic development of the tests, stratigraphic variation in size and shape, intrasample variability, and relationship between gross morphology of the test and prolocular and apertural dimensions.     

Time variation of earthquake activity in the Balkan region

Summary Three quantities M, E ^1/2 and E ^2/3 are used for studying the Balkan earthquake provinces. Most of them show a regular trend of activity, for some of them the observation period of 70 years is too short. Some graphs give evidence of the coincidence or migration of activity.     

The Structural geology of the Troms Area (Barents-Sea)

This paper reviews the exploration history of the Barents Sea part of the Norwegian continental shelf. The main structural elements which so far have been identified in the Troms/Finnmark/Barents Sea region are outlined and discussed. Special attention is given to the selected Area I outside Troms, where according to latest government plans, drilling will start in 1978. At least two different fault systems are discribed in Area I. The salt diapirs in the Tromsø Basin and their location relative to the fault pattern are discussed. A schematic structural model for Area I is suggested.     

A new palaeoenvironmental model for the evolution of the Byzovaya Palaeolithic site,northern Russia

Recently, the sediment stratigraphy and geochronology of the well‐known Palaeolithic site Byzovaya in northern Russia were investigated. New technological analyses of the artefacts suggest a Middle Palaeolithic Mousterian culture, and occupation by Neanderthals, not Modern humans as previously thought. We present here a new and detailed documentation of the stratigraphy, including the geological context of the artefacts and faunal remains. From sedimentological criteria we confidently interpret the find‐bearing strata as debris‐flow deposits, covered by aeolian sediments. The chronology is based on radiocarbon and luminescence (OSL) dates from the find‐bearing and overlying strata. The results are utilized to reconstruct the geological history at the excavation area. The stratigraphy varies considerably across the excavation area. The most intact and undisturbed part of the sequence was found inside the most recent Excavation II. In this part the artefacts and bones appear to have been permanently sealed and protected by aeolian sand. The older Excavation I shows a more complicated stratigraphy, as the finds may have been temporarily exposed during the early Holocene owing to ravine incision and slumping activity. The individual radiocarbon dates that were collected from different parts of the site and from various stratigraphic positions are re‐investigated in this study. By using Bayesian statistics the conclusion is that the site was occupied during a restricted period around 30.6–34.7 ka. A series of partly unpublished OSL dates of coversand from different sites demonstrates a regional aeolian signal during the Lateglacial in northern Russia, 15–14 ka.