Constraining jet/disc geometry and radiative processes in stellar black holes XTE J1118+480 and GX 339−4

We present results from modelling of quasi-simultaneous broad-band (radio through X-ray) observations of the Galactic stellar black hole (BH) transient X-ray binary (XRB) systems XTE J1118+480 and GX 339−4 using an irradiated disc + compact jet model. In addition to quantifying the physical properties of the jet, we have developed a new irradiated disc model which also constrains the geometry and temperature of the outer accretion disc by assuming a disc heated by viscous energy release and X-ray irradiation from the inner regions. For the source XTE J1118+480, which has better spectral coverage of the two in optical and near-infrared (OIR) wavelengths, we show that the entire broad-band continuum can be well described by an outflow-dominated model + an irradiated disc. The best-fitting radius of the outer edge of the disc is consistent with the Roche lobe geometry of the system, and the temperature of the outer edge of the accretion disc is similar to those found for other XRBs. Irradiation of the disc by the jet is found to be negligible for this source. For GX 339−4, the entire continuum is well described by the jet-dominated model only, with no disc component required. For the two XRBs, which have very different physical and orbital parameters and were in different accretion states during the observations, the sizes of the jet base are similar and both seem to prefer a high fraction of non-thermal electrons in the acceleration/shock region and a magnetically dominated plasma in the jet. These results, along with recent similar results from modelling other galactic XRBs and AGNs, may suggest an inherent unity in diversity in the geometric and radiative properties of compact jets from accreting black holes.     

The effect of chlorite interlayering on <Superscript>40</Superscript>Ar–<Superscript>39</Superscript>Ar biotite dating: an <Superscript>40</Superscript>Ar–<Superscript>39</Superscript>Ar laser-probe and TEM investigations of variably chloritised biotites

Biotite is one of the most common minerals dated by the ⁴⁰Ar–³⁹Ar method. It frequently shows K contents below the expected stoichiometric value, suggesting the presence of low-K impurities. The most common low-K alteration product of biotite is chlorite. Therefore, it is important to understand the effects of chlorite interlayering on ⁴⁰Ar–³⁹Ar ages in order to correctly interpret ⁴⁰Ar–³⁹Ar data. This study examines the outcome of ⁴⁰Ar–³⁹Ar dating analyses on variably chloritised biotites from Ordovician intrusive rocks. The infrared (IR) laser-probe technique and different gas extraction methods were adopted. Incremental laser-heating data on bulk samples yielded hump-shaped age profiles with meaningless young and old age steps. Both the extent of anomalous old age steps and the degree of discordance of the age spectra were much more pronounced in the more chloritised biotite samples. In contrast, in situ data on rock chips and total-fusion ages on single biotite flakes yielded ages concordant with, or younger than, the inferred emplacement ages. Transmission electron microscopy (TEM) was used to texturally characterise biotite samples at the nanometre scale. It was also used to document the complex decomposition-transformation process affecting interlayered biotite–chlorite during in-vacuo IR-laser heating to temperatures ranging from ~600 to >1,000 °C. TEM results suggest that hump-shaped age profiles result from an interplay between ³⁹Ar_K redistribution by recoil during sample irradiation and differential release of argon isotopes hosted in three main reservoirs. These reservoirs are (from least to most retentive): extended defects, chlorite and biotite. The final descending age segment is attributed to the progressive release of argon with increasing temperature from large biotite domains for which ³⁹Ar_K recoil loss was less important. ⁴⁰Ar–³⁹Ar data support previous findings, which suggest that ⁴⁰Ar–³⁹Ar ages when recoil effects are minimised, provide minimum estimates that approach the true biotite age, when the pristine domains are analysed. The most effective approach for obtaining meaningful ⁴⁰Ar–³⁹Ar ages was using individual total-fusion analyses on carefully selected, single flakes previously split along the basal cleavage by wet-grinding and corresponding to a sample mass of a few micrograms.Editorial responsibility: I Parsons     

Combined three-dimensional electric and seismic tomography study on the Åknes rockslide in western Norway

We present a combined 3-D geoelectric and seismic tomography study conducted on the large Åknes rockslide in western Norway. Movements on the slope are strongly influenced by water infiltration, such that the hydrogeological regime is considered as a critical factor affecting the slope stability. The aim of our combined geophysical study was to identify and visualize the main shallow tension fractures and to determine their effect on hydraulic processes by comparing the geophysical results with information from borehole logging and tracer tests. To resolve the complex subsurface conditions of the highly fractured rock mass, a three-dimensional set-up was chosen for our seismic survey. To map the water distribution within the rock mass, a pattern of nine intersecting 2-D geoelectric profiles covered the complete unstable slope. Six of them that crossed the seismic survey area were considered as a single data set in a 3-D inversion. For both methods, smoothing-constraint inversion algorithms were used, and the forward calculations and parameterizations were based on unstructured triangular meshes. A pair of parallel shallow low-velocity anomalies (< 1400 m/s) observed in the final seismic tomogram was immediately underlain by two anomalies with resistivities <13 kΩm in the resistivity tomogram. In combination with borehole logging results, the low-velocity and resistivity anomalies could be associated with the drained and water-filled part of the tension fractures, respectively. There were indications from impeller flowmeter measurements and tracer tests that such tension fractures intersected several other water-filled fractures and were responsible for distinct changes of the main groundwater flow paths.     

Characterisation of Soot Emitted by Domestic Heating,Aircraft and Cars Using Diesel or Biodiesel

The characterisation of aggregates, like soot, firstly requires the determination of the size distribution of the primary particles. The primary particle size of combustion generated aggregates depends upon the combustion environment and the formation conditions, such as temperature, pressure and fuel-to-air ratio, among others. Since the combustion characteristics are different in the different types of burners, the characterisation of primary particles may offer the possibility to distinguish soot from different sources. In this paper, we present the signature of the primary particles and the aggregates of soot emitted by cars using diesel or biodiesel, by domestic heating, and by aircraft exhausts, which can be considered as the major sources as derived from measurements on transmission electron micrographs. The size distributions of all aggregates types with different aerodynamic diameter were log-normal and quasi-monodisperse. The size distribution of the primary particles for soot emitted by different sources showed minor differences. However, a comparison between the diameter of the primary particles and those obtained using a standard method for carbon black revealed discrepancies. The median diameter of the primary particles was combined with the median number of primary particles in an aggregate to calculate the relative particle surface area available for adsorption. In a similar way, the relative specific surface area was determined. The surface area was measured using the Brunauer-Emmett-Teller (B.E.T.) nitrogen adsorption method and the relative surface area available for adsorption was calculated.     

Adaptation in integrated assessment modeling: where do we stand?

Adaptation is an important element on the climate change policy agenda. Integrated assessment models, which are key tools to assess climate change policies, have begun to address adaptation, either by including it implicitly in damage cost estimates, or by making it an explicit control variable. We analyze how modelers have chosen to describe adaptation within an integrated framework, and suggest many ways they could improve the treatment of adaptation by considering more of its bottom-up characteristics. Until this happens, we suggest, models may be too optimistic about the net benefits adaptation can provide, and therefore may underestimate the amount of mitigation they judge to be socially optimal. Under some conditions, better modeling of adaptation costs and benefits could have important implications for defining mitigation targets.     

The requirements for stable metallothionein clusters examined using synthetic lobster domains.

Metallothioneins (MTs) are small, cysteine-rich proteins which detoxify xenobiotic metals such as cadmium (Cd) and mercury (Hg). In crustaceans and mammals they consist of two independent domains which are folded around metal-thiolate clusters. MT clusters of different origins, exhibiting distinct, highly conserved cysteine positions on their sequences, show differences in metal-cysteine coordination and reactivity. Lobster-MT, containing two Cd3 beta domains, is an important model for structure-function relationships among the clusters. The influence of (1) the position of the cysteine residues and (2) steric and electrostatic effects of neighboring amino acids on the folding and stability of MT cluster were investigated. Thus, the native lobster beta C and beta N domains (each having nine cysteines and binding three M2+ ions) and a modified domain Cd3 beta C-->N, in which the cysteines of the C-terminal domain were relocated to match the positions of those in the N-terminal domain, were chemically prepared and characterized. The synthetic native domains (Cd3 beta C and Cd3 beta N) were found to exhibit spectroscopic properties, metal-binding affinities and kinetic reactivity similar to the holo-protein. However, the modified Cd3 beta C-->N domain was unusually reactive and in the presence of Chelex, metal chelation resin, aggregated to a Cd5(beta C-->N)2 dimer, which exhibited unusual structure as observed by its 113Cd-nuclear magnetic resonance. These differences in structure and reactivity demonstrated that the requirements for formation of a stable Cd3S9 beta-cluster are more stringent than simply the sequential positions of the cysteines along the peptide chain and must include interactions involving neighboring, noncysteine amino acids.     

Characterization of Frequency and Aggregation of the Antarctic Krill (<Emphasis Type="Italic">Euphausia superba</Emphasis>) Using Acoustics

In this study, the dB difference and characteristics of krill swarms inhabiting Subarea 48.1, which includes the west and south of the South Shetland Island and the Elephant Island peripheries, were estimated to distinguish Antarctic krill, using acoustics. From April 13 to 24, 2016, acoustic data were collected along 24 survey lines using the frequencies 38 and 120 kHz, and middle trawling was performed at 7 stations. Using the difference between the dB values of two volume backscattering strength (Sv) frequencies (38 and 120 kHz), a clear acoustic distinction could be made between Antarctic krill (4.9 to 12.0 dB) and fish (?4.0 to ?0.2 dB). The distributions and mean Sv of krill swarms in the Elephant Island peripheries and south of South Shetland Island were higher than those in the west of South Shetland Island. The mean length/ height ratio of krill swarms in the west of the South Shetland Island (64.5) was higher than that in the south (35.9) and the Elephant Island peripheries (33.8), with the length of the aggregations exceeding their height. Most krill swarms were distributed between the surface layer (less than 10 m below sea level) and within 200 m of water depth. These results are expected to serve as baseline data for evaluating krill density and biomass by distinguishing them from fish, using acoustics.     

Improving strategies with constraints regarding non-Gaussian statistics in a three-dimensional variational assimilation method

We assess validity of a Gaussian error assumption, the basic assumption in data assimilation theory, and propose two kinds of constraints regarding non-Gaussian statistics. In the mixed water region (MWR) off the east coast of Japan exhibiting complicated frontal structures, a probability density function (PDF) of subsurface temperature shows double peaks corresponding to the Kuroshio and Oyashio waters. The complicated frontal structures characterized by the temperature PDF sometimes cause large innovations, bringing about a non-Gaussianity of errors. It is also revealed that assimilated results with a standard three-dimensional variational (3DVAR) scheme have some issues in MWR, arising from the non-Gaussianity of errors. The Oyashio water sometimes becomes unrealistically cold. The double peaks seen in the observed temperature PDF are too smoothed. To improve the assimilated field in MWR, we introduce two kinds of constraints, J _c1 and J _c2, which model the observed temperature PDF. The constraint J _c1 prevents the unrealistically cold Oyashio water, and J _c2 intends to reproduce the double peaks. The assimilated fields are significantly improved by using these constraints. The constraint J _c1 effectively reduces the unrealistically cold Oyashio water. The double peaks in the observed temperature PDF are successfully reproduced by J _c2. In addition, not only subsurface temperature but also whole level temperature and salinity (T–S) fields are improved by adopting J _c1 and J _c2 to a multivariate 3DVAR scheme with vertical coupled T–S empirical orthogonal function modes.