The Ag/Au ratio of native gold and electrum and the geochemical environment of gold vein deposits in Japan

The chemical composition of native gold and electrum from auriferous vein and gold-silver vein deposits in Japan has been analyzed and summarized. The Ag/Au ratios of native gold and electrum from these two types of deposits are distinct, i.e., 10–20 Ag at % (auriferous vein) and 30–70 Ag at % (gold-silver vein). Thermochemical calculations suggest that the Ag/Au ratio of native gold and electrum should decrease with increasing chloride concentration and temperature. This is consistent with analytical results of native gold and electrum and fluid inclusion studies. Based on the Ag content of native gold and electrum, the Fe content of sphalerite, and the estimated temperatures, it is deduced that the sulfur activity for auriferous vein-type systems was lower than that of gold-silver vein-type systems.     

Miocene-Pliocene half-graben evolution, detachment faulting and late-stage core complex uplift from reflection seismic data in south-east Arizona

Reflection seismic data show that the late Cenozoic Safford Basin in the Basin and Range of south-eastern Arizona, is a 4.5-km-deep, NW-trending, SW-dipping half graben composed of middle Miocene to upper Pliocene sediments, separated by a late Miocene sequence boundary into lower and upper basin-fill sequences. Extension during lower basin-fill deposition was accommodated along an E-dipping range-bounding fault comprising a secondary breakaway zone along the north-east flank of the Pinaleño Mountains core complex. This fault was a listric detachment fault, active throughout the mid-Tertiary and late Cenozoic, or a younger fault splay that cut or merged with the detachment fault. Most extension in the basin was accommodated by slip on the range-bounding fault, although episodic movement along antithetic faults temporarily created a symmetric graben. Upper-plate movement over bends in the range-bounding fault created rollover structures in the basin fill and affected deposition within the half graben. Rapid periods of subsidence relative to sedimentation during lower basin-fill deposition created thick, laterally extensive lacustrine or alluvial plain deposits, and restricted proximal alluvian-fan deposits to the basin margins. A period of rapid extension and subsidence relative to sediment influx, or steepening of the upper segment of the range-bounding fault at the start of upper basin-fill deposition resulted in a large downwarp over a major fault bend. Sedimentation was restricted to this downwarp until filled. Episodic subsidence during upper basin-fill deposition caused widespread interbedding of lacustrine and fluvial deposits. Northeastward tilting along the south-western flank of the basin and north-eastward migration of the depocentre during later periods of upper basin-fill deposition suggest decreased extension rates relative to late-stage core complex uplift.     

Types of sedimentary environment in alluvial sediments distinguished on the basis of its chemical constitution: the example of the lower course of the Obra river (Western Poland)

Research concerning chemical constitution of alluvial sediments was done in the lower course of the Obra river (Western Poland). The fragment of vertical profile, which consisted of various alluvial sediments (fine sands, peats, and sandy silts) was chosen for detailed analysis. The main research problem was to determine if lithology and chemical constitution of alluvial deposits are interconnected in a distinct way within studied section of the Obra river valley, and, if changes of chemical elements’ concentration could be used to illustrate depositional processes, which take place in riverbed and floodplain. Concentrations of Fe, Mn, Cu, Zn, Ca, Mg, and K were determined in collected sediment samples. Next, geochemical groups of alluvial sediments were distinguished using cluster analysis. Investigated changes of chemical elements’ concentration show that there is a distinct border between the environment of organic sediments, which marks the place of former functioning of the Obra riverbed, and sandy silts, which were deposited within floodplain during floods. Besides, floodplain sediments, riverbed sediments, and reductive environment within peat deposits were singled out on the basis of the analysis.     

Rheology and geodynamic modelling: the next step forward

The application of continuum mechanics and microstructural analysis to geological studies over the past 30 years has spurred earth scientists to reassess fundamental tectonic processes such as subduction, collision and rifting in terms of dynamics. Armed with new analytical methods, geologists have returned to the field to look at rock structures with more mechanistic eyes. The advent of sophisticated computers, programs, and laboratory deformation equipment has facilitated the simulation of geodynamic processes that range in scale from the grain to the lithosphere. The result has been specialization, with the concomitant opening of communication gaps between geodynamicists, field geologists and rock mechanicists. Partly, these gaps reflect differences of perception and approach. In order to bridge these gaps, a workshop was organized after the DRM conference to debate how field and laboratory studies of deformed rocks can improve our understanding of lithospheric rheology, and in turn, how this understanding can be used to refine dynamic models of orogenesis. The workshop hosted participants with backgrounds in structural geology, experimental rock mechanics, metamorphic petrology and both numerical and analogue modelling. This paper summarizes the main controversies and conclusions reached during the workshop. For the sake of brevity, referencing in this summary is restricted to literature referred to during the oral presentations and to comments made by speakers themselves (names italicized).     

Deformations and Manifestations of Degassing in the Sedimentary Cover of the Equatorial Segment of the West Atlantic: Implications for Lithospheric Geodynamics

Manifestations of fluids and deformations in the sedimentary cover, which are both factors of brightening (blanking anomalies) in seismoacoustic records, in the equatorial segment of the Atlantic coincide with the sublatitudinal zones of the activated passive parts of transform faults and with zones of lower gravity anomalies and higher values of remnant magnetization, which form as a result of serpentinization. The cause-and-effect sequence of intraplate phenomena includes: the contrasting geodynamic state → horizontal movements that form macrofractures → water supply to the upper mantle → serpentinization of rocks in the upper mantle → deformations associated with vertical uplift of basement and sedimentary cover blocks, coupled with fluid generation → and fluid accumulation in the sedimentary cover, accompanied by the formation of anomalies in seismoacoustic records. Based on the seismic data, we have identified imbricate-thrust deformations, diapir structures, stamp folds, and positive and negative flower structures, indicating the presence of strike-slip faults in the passive parts of transform faults. The general spatial distribution of deformation structures shows their concentration in cold mantle zones. Correlative comparison of the structural characteristics of deformations shows the direct relationship between the heights of structures and the development of serpentinization processes. As per the age of the basement, deformations range from 27–38 to 43–53 Ma; a quite thick sedimentary cover makes it possible to reveal them based on the characteristic types of seismoacoustic records. The formation of the Antilles arc ca. 10 Ma ago affected the equatorial segment of the Atlantic; it formed kink bands where lithospheric blocks underwent displacements with counterclockwise rotations, deformations related to compression and vertical uplift of crustal fragments, and local extension that favored degassing of endogenous fluids. Sublatitudinally oriented imbricate-thrust deformations with different vergences indicate irregularity and alternating strike-slip directions as blocks between fractures were laterally influenced.     

Rainwater chemistry and bulk atmospheric deposition in a tropical semiarid ecosystem: the Brazilian Caatinga

We assessed the rainwater chemistry, the potential sources of its main inorganic components and bulk atmospheric deposition in a rural tropical semiarid region in the Brazilian Caatinga. Rainfall samples were collected during two wet seasons, one during an extremely dry year (2012) and one during a year with normal rainfall (2013). According to measurements of the main inorganic ions in the rainwater (H⁺, Na⁺, NH₄ ⁺, K⁺, Ca²⁺, Mg²⁺, Cl^?, NO₃ ^?, and SO₄ ^2?), no differences were observed in the total ionic charge between the two investigated wet seasons. However, Ca²⁺, K⁺, NH₄ ⁺ and NO₃ ^? were significant higher in the wetter year (p < 0.05) which was attributed to anthropogenic activities, such as organic fertilizer applications. The total ionic contents of the rainwater suggested a dominant marine contribution, accounting for 76 % and 58 % of the rainwater in 2012 and 2013, respectively. The sum of the non-sea-salt fractions of Cl^?, SO₄ ^2?, Mg²⁺, Ca²⁺ and K⁺ were 19 % and 33 % in 2012 and 2013, and the nitrogenous compounds accounted for 2.8 % and 6.0 % of the total ionic contents in 2012 and 2013, respectively. The ionic ratios suggested that Mg²⁺ was probably the main neutralizing constituent of rainwater acidity, followed by Ca²⁺. We observed a low bulk atmospheric deposition of all major rainwater ions during both wet seasons. Regarding nitrogen deposition, we estimated slightly lower annual inputs than previous global estimates. Our findings contribute to the understanding of rainfall chemistry in northeastern Brazil by providing baseline information for a previously unstudied tropical semiarid ecosystem.     

Exploring coronal structures with SOHO

We applied advanced image enhancement techniques to explore in detail the characteristics of the small-scale structures and/or the low contrast structures in several Coronal Mass Ejections (CMEs) observed by SOHO. We highlight here the results from our studies of the morphology and dynamical evolution of CME structures in the solar corona using two instruments on board SOHO: LASCO and EIT.     

MS 1603.6+2600: an accretion disc corona source?

We have observed the eclipsing low-mass X-ray binary MS 1603.6+2600 with Chandra for 7 ks. The X-ray spectrum is well fit with a single absorbed power law with an index of ∼2. We find a clear sinusoidal modulation in the X-ray light curve with a period of  1.7 ± 0.2 h  , consistent with the period of 1.85 h found before. However, no (partial) eclipses were found. We argue that if the X-ray flare observed in earlier X-ray observations was a type I X-ray burst, then the source can only be an accretion disc corona source at a distance of ∼11–24 kpc (implying a height above the Galactic disc of ∼8–17 kpc). It has also been proposed in the literature that MS 1603.76+2600 is a dipper at ∼75 kpc. We argue that, in this dipper scenario, the observed optical properties of MS 1603.6+2600 are difficult to reconcile with the optical properties one would expect on the basis of comparisons with other high-inclination, low-mass X-ray binaries, unless the X-ray flare was not a type I X-ray burst. In that case, the source can be a nearby soft X-ray transient accreting at a quiescent rate, as was proposed by Hakala et al., or a high-inclination source at ∼15–20 kpc.     

14C content of ten meteorites measured by tandem accelerator mass spectrometry

¹⁴C has been measured in three North American and seven Antarctic meteorites with the Chalk River MP tandem accelerator. In most cases cosmogenic¹⁴C, which is tightly bound, was separated from absorbed atmospheric radiocarbon by stepwise heating extractions. Terrestrial ages obtained by comparing cosmogenic¹⁴C in the meteorite to that in Bruderheim are (7.2 ± 0.6) × 10³ years for Yamato 7304, (11.6 ± 0.4) × 10³ years for Estacado, and range from (32.7 ± 0.5) × 10³ to (41.0 ± 0.8) × 10³ years for six meteorites recovered at Allan Hills and its vicinity. The present upper limit to age determination by the accelerator method varies from 50 × 10³ to 70 × 10³ years depending upon mass and carbon content of the sample. The natural limit caused by cosmic ray production of¹⁴C in silicate rocks at 2000 m elevation is estimated to be (55 ± 5) × 10³ years. “Weathering ages” were estimated for the Antarctic meteorites from the specific activity of loosely-bound CO₂ considered to be absorbed from the terrestrial atmosphere on weathering. The accelerator measurements are in accordance with previous low-level counting measurements but have higher precision and sensitivity.     

Episode 49 of the Pu'u 'O'o-Kupaianaha eruption of Kilauea volcano-breakdown of a steady-state eruptive era

The Pu'u 'O'o-Kupaianaha eruption (1983-present) is the longest lived rift eruption of either Kilauea or neighboring Mauna Loa in recorded history. The initial fissure opening in January 1983 was followed by three years of episodic fire fountaining at the Pu'u 'O'o vent on Kilauea's east rift zone 19km from the summit (episodes 4–47). These spectacular events gave way in July 1986 to five and a half years of nearcontinuous, low-level effusion from the Kupaianaha vent, 3km to the cast (episode 48). A 49th episode began in November 1991 with the opening of a new fissure between Pu'u 'O'o and Kupaianaha. this three week long outburst heralded an era of more erratic eruptive behavior characterized by the shut down of Kupaianaha in February 1992 and subsequent intermittent eruption from vents on the west flank of Pu'u 'O'o (episodes 50 and 51). The events occurring over this period are due to progressive shrinkage of the rift-zone reservoir beneath the eruption site, and had limited impact on eruption temperatures and lava composition.