The migration of fluid-filled grain boundaries in recrystallizing synthetic bischofite: first results of in-situ high-pressure, high-temperature deformation experiments in transmitted light

The effect of fluids on recrystallization behaviour is well known; however, the detailed microscale distribution of fluid in grain boundaries and the influence of fluid on grain boundary migration are still unresolved. In this study, in‐situ deformation experiments in transmitted light microscopy were undertaken, as this allows continuous and direct observation of the whole range of processes involved in fluid‐assisted grain boundary migration. A new see‐through deformation apparatus was developed to enable the control of fluid pressure. Bischofite containing small amounts of aqueous fluid was deformed at temperatures between 50 and 90 °C, over a range of fluid pressure from 0.5 to 1 MPa, and strain rates of 5 × 10^?6 to 1 × 10^?4 s^?1. The rates of grain boundary migration were measured at different temperatures and strain rates. Detailed observations during and after the deformation illustrate the evolution of migrating fluid‐filled grain boundaries and show that the incorporation of fluids from inclusions as well as their pinch‐off is dependent on the grain boundary velocity, the thickness of the grain boundary and the size and shape of the inclusions. Direct evidence is presented for the contraction of the grain boundary fluids into isolated inclusions after equilibrium conditions are attained.     

Mineralogy of morphogenetic types of ferromanganese deposits in the world ocean

The mineralogy and structural features of the main types of ferromanganese deposits—nodules, micronodules, Co-bearing crusts, crustlike nodules, and low-temperature hydrothermal manganese crusts and ferruginous ochers—are considered. The correlation between their mineral composition and structure is shown. The proposed classification of mineral types is based on characteristic assemblages of Fe and Mn minerals.     

Nature of polymerization and properties of silicate melts and glasses at high pressure

The structures of sodium silicate and aluminosilicate glasses quenched from melts at high pressure (6-10 GPa) with varying degrees of polymerization (fractions of nonbridging oxygen) were explored using solid-state NMR [¹⁷O and ²⁷Al triple-quantum magic-angle spinning (3QMAS) NMR]. The bond connectivity in melts among four and highly coordinated network polyhedra, such as ^[4]Al, ^[5,6]Al, ^[4]Si, and ^[5,6]Si, at high pressure is shown to be significantly different from that at ambient pressure. In particular, in the silicate and aluminosilicate melts, the proportion of nonbridging oxygen (NBO) generally decreases with increasing pressure, leading to the formation of new oxygen clusters that include 5- and 6-coordinated Si and Al in addition to 4-coordinated Al and Si, such as ^[4]Si-O-^[5,6]Si, ^[4]Si-O-^[5,6]Al and Na-O-^[5,6]Si. While the fractions of ^[5,6]Al increase with pressure, the magnitude of this increase diminishes with increasing degrees of ambient-pressure polymerization under isobaric conditions. Incorporating the above structural information into models of melt properties reproduces the anomalous pressure-dependence of O²⁻ diffusivity and viscosity often observed in silicate melts.     

Iron isotopic analyses of geological reference materials on MC-ICP-MS with instrumental mass bias corrected by three independent methods

Here we report iron (Fe) isotopic data of three pure Fe solution standards (IRMM-014, GSB Fe, and NIST 3126a) and five widely used geological reference materials (RMs) from the United States Geological Survey and Geological Survey of Japan obtained on a Neptune Plus multi-collector–inductively coupled plasma–mass spectrometer (MC-ICP-MS) in our laboratory over the past 3 years. The instrumental mass bias was corrected by three independent methods: sample-standard bracketing (SSB), Ni doping?+?SSB, and ⁵⁷Fe–⁵⁸Fe double spike?+?SSB. Measurements reveal that both the Ni doping and double spike methods helped calibrate short-term fluctuations in mass bias. Collectively, almost all measurements of RMs yielded δ⁵⁶Fe within?±?0.05 of recommended values, provided that each sample was measured four times on MC-ICP-MS. For the first time, new recommended values for NIST SRM3126a are reported (δ⁵⁶Fe?=?0.363?±?0.006, 2SE, 95% CI; and δ⁵⁷Fe?=?0.534?±?0.010, 2SE).     

The effect of annealing on the luminescence decay-time of synthetic calcite:Mn

Calcite was synthesized by four methods, and the luminescence decay-time was measured for nine samples before and after heating hydrothermally in the temperature range 200–400°C. Decay-time data were collected between room temperature and approximately 15 K. The decay time at room temperature is approximately 50 ms, with little difference between a given calcite before and after hydrothermal treatment. The decay time at 15 K is always greater than at room temperature as the effect of thermal quenching diminishes. Differences in decay time before and after heating are more apparent at low temperature owing to this reduction in thermal quenching. The decay time decreased significantly in two samples, and an increase in decay time was observed in the remaining seven samples following heating. Among the latter group, the change in decay time was insignificant in three samples. The results are compared with previous data in which it was shown that the effect of heating is to increase the intensity of luminescence.     

Citizens as sensors: the world of volunteered geography

In recent months there has been an explosion of interest in using the Web to create, assemble, and disseminate geographic information provided voluntarily by individuals. Sites such as Wikimapia and OpenStreetMap are empowering citizens to create a global patchwork of geographic information, while Google Earth and other virtual globes are encouraging volunteers to develop interesting applications using their own data. I review this phenomenon, and examine associated issues: what drives people to do this, how accurate are the results, will they threaten individual privacy, and how can they augment more conventional sources? I compare this new phenomenon to more traditional citizen science and the role of the amateur in geographic observation.     

An investigation of landslide problems in spoil piles in a strip coal mining area, West Virginia (U.S.A.)

Spoil piles in coal mine areas in north-central West Virginia suffer from numerous landslide problems. An investigation to determine the causes of these slides showed that the stratigraphic composition, the nature of the foundation soils, the seasonal high water table and the mining technique contributed to the instability. The presence of red shales is identified as a key problem.

Several models of failure were investigated based on inclinometer data. These data suggest that multiple failure surfaces may develop in spoil piles. In such cases, the initial failure surface is better defined than other movement surfaces, which either represent subsequent failures that occur in response to placement of additional spoil materials, or are shear zones of readjustment following initial failure. Results show that failures are most likely initiated along the spoil-natural ground interface and propagate slowly into the spoil mass.     

Sulfides in petroleum

The homologous series of terpenoid sulfides previously reported to be present in Athabasca bitumen have been detected in a variety of petroleums from the Western Hemisphere. All 22 samples examined, ranging in age from Devonoan to Cretaceous, contained the terpenoid sulfides. A method is described for the isolation of sulfides from petroleums based on the selective oxidation of sulfides to more polar sulfoxides which are easily removed from the mixture and their subsequent reduction to sulfides. The sulfide content in the petroleum maltenes examined ranged from 0.3 to 16.1% w/w. In addition to the bicyclic and tetracyclic terpenoid sulfides a new series of tricyclic terpenoid sulfides has been identified, and the details of the isoprenoid side chain have been elucidated for all three homologous series. The distributions by carbon number of the bicyclic and tetracyclic homologous series of terpenoid sulfides show pronounced variations which are attributed to thermal maturity and degree of water washing of the petroleum, thus the ability to identify terpenoid sulfides should provide a useful tool for oil-oil and oil-source rock correlation studies. The bicyclic and tricyclic terpenoid sulfides have the same carbon framework as the carotenoids which suggest that these sulfides were accessory pigments in photosynthesis.