Abstract Spatial and temporal variations in radiative fluxes influence glacier mass‐balance in mountain areas. The primary goal of this study was to assess differences in solar radiation on three glacial cirques located in the Maladeta Mountain massif (Central Spanish Pyrenees), and analyse their implications on glacier development and morphology. A quantitative approach is adopted to obtain the values of solar radiation (direct, diffuse and global radiation), combining several field data parameters (measured at 55 control‐points) with the solar radiation modelling package Ecosim. The data obtained confirm that the morphologies of the glacial bodies developed in the three cirques have a good correlation with the spatial variation on solar radiation inputs, favouring also the conservation (Aneto and Coronas cirques) or total vanishing (Llosás cirque) of the glacial remnants analysed here. The study shows how strongly in this Alpine‐Mediterranean context solar radiation — firstly as a function of latitude and time of year, and locally as a function of topographic slope, aspect and shadowing — controls the mass‐balance and the spatial distribution of melting in small glaciers, having an effect on the development of their morphologies. 相似文献
The objective of this work is to assess the concentrations of three factions of air particles (settable particles, TSP and PM10) and the levels of several toxic elements in a clay atomisation industry through aerosol sampling at several points inside an industrial plant. Mechanical activities, which produce diffuse emissions, are the main process of discharge of particles in both indoor and outdoor workplace environments in the atomisation plant. The levels of As, Cd, Pb, Zn, Ba and Ni increase in the zones with higher concentrations of particles and lower ventilation. The concentrations of As and F are not influenced by the recycling processes. The levels of Cd and Pb do not show great enrichment in air particles collected inside the atomisation plant although the content of both elements is associated with ceramic muck recycling. Finally, the content of B in waste water is mainly transferred in gaseous phase to the atmosphere during the process of drying by atomisation. 相似文献
Zoned quartz and feldspar phenocrysts of the Upper Carboniferous eastern Erzgebirge volcano-plutonic complex were studied by cathodoluminescence and minor and trace element profiling. The results verify the suitability of quartz and feldspar phenocrysts as recorders of differentiation trends, magma mixing and recharge events, and suggest that much heterogeneity in plutonic systems may be overlooked on a whole-rock scale. Multiple resorption surfaces and zones, element concentration steps in zoned quartz (Ti) and feldspar phenocrysts (anorthite content, Ba, Sr), and plagioclase-mantled K-feldspars etc. indicate mixing of silicic magma with a more mafic magma for several magmatic phases of the eastern Erzgebirge volcano-plutonic complex. Generally, feldspar appears to be sensitive to the physicochemical changes of the melt, whereas quartz phenocrysts are more stable and can survive a longer period of evolution and final effusion of silicic magmas. The regional distribution of mixing-compatible textures suggests that magma mingling and mixing was a major process in the evolution of these late-Variscan granites and associated volcanic rocks.
Quartz phenocrysts from 14 magmatic phases of the eastern Erzgebirge volcano-plutonic complex provide information on the relative timing of different mixing processes, storage and recharge, allowing a model for the distribution of magma reservoirs in space and time. At least two levels of magma storage are envisioned: deep reservoirs between 24 and 17 km (the crystallisation level of quartz phenocrysts) and subvolcanic reservoirs between 13 and 6 km. Deflation of the shallow reservoirs during the extrusion of the Teplice rhyolites triggered the formation of the Altenberg-Teplice caldera above the eastern Erzgebirge volcano-plutonic complex. The deep magma reservoir of the Teplice rhyolite also has a genetic relationship to the younger mineralised A-type granites, as indicated by quartz phenocryst populations. The pre-caldera biotite granites and the rhyodacitic Schönfeld volcanic rocks represent temporally and spatially separate magma sources. However, the deep magma reservoir of both is assumed to have been at a depth of 24–17 km. The drastic chemical contrast between the pre-caldera Schönfeld (Westfalian B–C) and the syn-caldera Teplice (Westfalian C–D) volcanic rocks is related to the change from late-orogenic geotectonic environment to post-orogenic faulting, and is considered an important chronostratigraphic marker. 相似文献
Carbon and oxygen isotopes were determined on 40 recrystallized shells of Late Jurassic bivalves from the Lusitanian Basin of Portugal. In contrast with the oxygen isotopes, which exhibited considerable diagenetic distortion, the carbon isotopes are thought to preserve a record of the salinity of the Jurassic marginal marine seas in which these bivalves lived. The reconstructed palaeosalinities range from 35%o (euhaline) to 5% (oligohaline). Comparing these values with the palaeosalinity reconstructed from a palaeoecological analysis of 17 stratigraphic levels within the basin, the independently derived values agree in most cases. Strongly differing values are explained as being due to biotic factors and to diagenetic distortion of the isotopic signal; they are less likely to be due to smallscale time-averaging or insufficient microstratigraphic sampling. On the whole, the carbon isotope analyses are thought to produce reasonable palaeosalinity values, although data from infaunal, originally aragonitic bivalves appear to be less reliable than those from epifaunal bivalves with a predominantly or exclusively calcitic shell. As diagenetic alteration of the carbon isotope signal is, however, unpredictable and biotic effects on the isotopic composition are insufficiently known, palaeosalinity reconstructions based on stable isotope data should be supported by palaeoecological data. 相似文献
It is often necessary to locate the original quarry which supplied the stone for a particular historical building. This stones could be used for future restoration work and for testing in the laboratory (artificial aging tests, physical properties determination, control of the efficacy of conservation treatments, etc.). Generally, reviewing historical documentation gives information about the geographical setting of quarries and location of the stones in the monument, but this information needs to be proved by field and laboratory studies. The comparative study of stone from quarries and monuments should basically include the following: (1) mineralogical and petrographical studies; (2) the chemical analysis of major, minor and trace elements; (3)stable isotopes determinations; (4) physical properties of quarry materials and unweathered building stone (water absorption, ultrasound transmission velocity, porosity and porous system, density, bulk density, compressive strength, etc.). This methodology was applied to Málaga Cathedral stones represented in the main façade, towers, and the western zone of the terrace, which, according to historical literature, came from Almayate (Miocene–Pliocene limestones) and Cerro Coronado (Permotriassic sandstone) in Málaga. The conclusion of the comparative study carried out on quarries and building stones was consistent with the information available from the historical documentation. 相似文献
Plagioclases, Fe-rich epidotes and garnets coexisting in metamorphic rocks of basaltoid and granitoid substrata have been analyzed by standard microprobe techniques. The results presented are based on 34000 data on plagioclases, nearly 24400 on coexisting epidotes as well as of 5000 garnet data. The chemical variations within the singular plagioclase grain and in the range of a thin section are very comprehensive. Adjoining microfields (10–20 μm distance) exhibit differences in the An-contents between 30 and 80% rel. These observations are valid for nearly 78% of the examined plagioclases. Only in the higher amphibolite facies the An-variations are reduced to an average value of 32% rel. Merely the high temperature plagioclases with a compositional range of An 68-An 79 coexisting with clinopyroxene are largely homogeneous. Their variation is amounting to 6,5% An rel. The epidote chemisms reveal a dependance on both of the different substrata and their oxidation status. The maximum value of the Fe (III) substitution on the M1 position in the epidote structure is reaching 97 molar per cent at the higher oxidized meta-granitoids and merely 87% at the metabasaltoids. The variations of the Fe/Al-proportions in the microfields are amounting to 5–20% as to the granitoid substrata and to 5–47% rel. as to the basaltoid substrata. In both of the substrata the garnets are very rich of almandine (40–70%). Besides variable amounts of grossularite and pyrope components they also contain 10–20% (basaltoids) and 1–20% (granitoids) spessartine. The most significant element variations are observed for the element Mn in garnets of granitoid origin. These variations attain 46% within the garnet grains. Only for the garnets of the basic substrata from the amphibolite facies one can state a homogenization. The reaction inertia in achieving metamorphic equilibrium is demonstrated by a selected metabasite sample of the amphibolite facies. It seems that only at temperature >600°C a homogenization of the plagioclases and garnets is initiated so that at low temperature a thermometry by means of An-contents in the plagioclases or Mn/Fe-relations in the garnets is not possible. 相似文献
In Europe, the Wide Wheel abrasion (WWA) test and the B?hme abrasion (BA) test are among the most widely used standard test
methods for determining abrasion resistance of natural stones, the former being the reference test method in EN 14157 Standard.
However, it is stated in the Annex-A (Informative) of EN 14157 Standard that very limited data are available to provide correlations
between these two test methods. To be able to fill this gap, in this study, 25 different natural stones belonging to sedimentary,
metamorphic and igneous groups were tested for their abrasion resistance as well as physico-mechanical properties. Also, for
a better interpretation of abrasion resistance characteristics of the tested stone materials, relationships between abrasion
resistance and physico-mechanical properties were statistically examined. A statistically significant linear correlation (R2 = 0.85; P value = 0.000) was established between the WWA test and the BA test, which could be used in practice for converting the measured
abrasion resistance values from one testing method to another. It was also found that the correlation between these two test
methods improved significantly (R2 = 0.93; P value = 0.001) when relatively high-porosity stone materials (porosity ≥1%) were separately evaluated. Both methods of abrasion
resistance employed in the present study showed statistically significant linear correlations with uniaxial compressive strength
and Brazilian tensile strength, the former proving to be a more influencing parameter on resistance to abrasion. Also, from
the point view of representing actual abrasion mechanism of stone materials in practice, the necessity of simulating multi-directional
foot traffic in abrasion testing methods was discussed. In this respect, the reference test method in the EN 14157 Standard
was criticized for not fully meeting this requirement. It was also pointed out that the reference method could have some drawbacks
when applied to coarse-grained granitic rocks having cleavable minerals such as plagioclase and orthoclase feldspars. 相似文献
Surface displacements and gravity changes due to volcanic sources are influenced by medium properties. We investigate topographic,
elastic and self-gravitation interaction in order to outline the major factors that are significant in data modelling. While
elastic-gravitational models can provide a suitable approximation to problems of volcanic loading in areas where topographic
relief is negligible, for prominent volcanoes the rough topography could affect deformation and gravity changes to a greater
extent than self-gravitation. This fact requires the selection, depending on local relief, of a suitable model for use in
the interpretation of surface precursors of volcanic activity. We use the three-dimensional Indirect Boundary Element Method
to examine the effects of topography on deformation and gravity changes in models of magma chamber inflation/deflation. Topography
has a significant effect on predicted surface deformation and gravity changes. Both the magnitude and pattern of the geodetic
signals are significantly different compared to half-space solutions. Thus, failure to account for topographic effects in
areas of prominent relief can bias the estimate of volcanic source parameters, since the magnitude and pattern of deformation
and gravity changes depend on such effects. 相似文献
A method is proposed for estimating the surface-layer depth \((z_s)\) and the friction velocity \((u_*)\) as a function of stability (here quantified by the Obukhov length, L) over the complete range of unstable flow regimes. This method extends that developed previously for stable conditions by Argaín et al. (Boundary-Layer Meteorol 130:15–28, 2009), but uses a qualitatively different approach. The method is specifically used to calculate the fractional speed-up \((\varDelta S)\) in flow over a ridge, although it is suitable for more general boundary-layer applications. The behaviour of \(z_s \left( L\right) \) and \(u_*\left( L\right) \) as a function of L is indirectly assessed via calculation of \(\varDelta S\left( L\right) \) using the linear model of Hunt et al. (Q J R Meteorol Soc 29:16–26, 1988) and its comparison with the field measurements reported in Coppin et al. (Boundary-Layer Meteorol 69:173–199, 1994) and with numerical simulations carried out using a non-linear numerical model, FLEX. The behaviour of \(\varDelta S\) estimated from the linear model is clearly improved when \(u_*\) is calculated using the method proposed here, confirming the importance of accounting for the dependences of \(z_s\left( L \right) \) and \(u_*\left( L \right) \) on L to better represent processes in the unstable boundary layer. 相似文献