Aerosols and their influence on radiation partitioning and savanna productivity in northern Australia

Aerosols have been shown to affect the quantity and quality of solar radiation on the Earth’s surface. Savanna regions are subject to frequent burning and release of aerosols that may impact on radiation components and possibly vegetation productivity in this region. Therefore, in this study, we have analyzed the optical properties of aerosols (aerosol optical depth (AOD) and Angstrom coefficient) from the Atmospheric Radiation Measurement site in Darwin for the periods from April 2002 to June 2005 as measured by a multifilter rotating shadowband radiometer. The influence of aerosols and their effect on surface shortwave incoming solar radiation and savanna productivity were examined for the dry season using sky radiation collection of radiometers and eddy covariance measurements from the Howard Springs flux site. Results indicated that aerosol concentrations in the region were relatively low compared to other savanna regions with the maximum monthly average AOD over the period being the greatest in October (0.29?±?0.003 standard error at 500 nm). The highest monthly average Angstrom exponent was also found in October (1.38?±?0.008). The relatively low aerosol concentration in this region can be attributed to the mixture of smoke aerosols with humidity haze and local circulations. Over a range of AODs from 0.1 to 0.4, we found a modest increase in the fraction of diffuse radiation to total radiation from 11% to 21%. This small increase in diffuse fraction did not affect the carbon flux significantly. However, because the current range of AOD in the region is relatively low, the region could be sensitive to increases in aerosols and diffuse fraction in the future.     

Novel observations of benthic enrichment in contrasting flow regimes with implications for marine farm monitoring and management

We examine macrofaunal and physico-chemical responses to organic enrichment beneath salmon farms in contrasting flow environments, and reveal pronounced flow-related differences in the magnitude and spatial extent of effects. Total macrofaunal abundances at high flow sites were nearly an order of magnitude greater than at comparable low flow sites, representing a significant benthic biomass. These very high abundances occurred in conjunction with moderate-to-high species richness, and were evident in the absence of appreciable organic matter accumulation. Biological responses to increasing sulfide were variable; however a significant biological threshold was evident at 1500 μM. Macrofaunal responses at high flow sites differed substantially from the Pearson–Rosenberg model. The atypical ecological conditions were attributed to (i) limited accumulation of fine sediments, (ii) maintenance of aerobic conditions in near-surface sediments, and (iii) an abundant food supply. Thus, enhanced resilience to organic waste at well-flushed sites appears related to both biological and physical processes.     

A proposal for a new scenario framework to support research and assessment in different climate research communities

In this paper, we propose a scenario framework that could provide a scenario “thread” through the different climate research communities (climate change – vulnerability, impact, and adaptation - and mitigation) in order to support assessment of mitigation and adaptation strategies and climate impacts. The scenario framework is organized around a matrix with two main axes: radiative forcing levels and socio-economic conditions. The radiative forcing levels (and the associated climate signal) are described by the new Representative Concentration Pathways. The second axis, socio-economic developments comprises elements that affect the capacity for mitigation and adaptation, as well as the exposure to climate impacts. The proposed scenarios derived from this framework are limited in number, allow for comparison across various mitigation and adaptation levels, address a range of vulnerability characteristics, provide information across climate forcing and vulnerability states and span a full century time scale. Assessments based on the proposed scenario framework would strengthen cooperation between integrated-assessment modelers, climate modelers and vulnerability, impact and adaptation researchers, and most importantly, facilitate the development of more consistent and comparable research within and across these research communities.     

The marine controlled source electromagnetic response of a steel borehole casing: applications for the NEPTUNE Canada gas hydrate observatory

Gas hydrates are a potential energy resource, a possible factor in climate change and an exploration geohazard. The University of Toronto has deployed a permanent seafloor time‐domain controlled source electromagnetic (CSEM) system offshore Vancouver Island, within the framework of the NEPTUNE Canada underwater cabled observatory. Hydrates are known to be present in the area and due to their electrically resistive nature can be monitored by 5 permanent electric field receivers. However, two cased boreholes may be drilled near the CSEM site in the near future. To understand any potential distortions of the electric fields due to the metal, we model the marine electromagnetic response of a conductive steel borehole casing. First, we consider the commonly used canonical model consisting of a 100 Ωm, 100 m thick resistive hydrocarbon layer embedded at a depth of 1000 m in a 1 Ωm conductive host medium, with the addition of a typical steel production casing extending from the seafloor to the resistive zone. Results show that in both the frequency and time domains the distortion produced by the casing occurs at smaller transmitter‐receiver offsets than the offsets required to detect the resistive layer. Second, we consider the experimentally determined model of the offshore Vancouver Island hydrate zone, consisting of a 5.5 Ωm, 36 m thick hydrate layer overlying a 0.7 Ωm sedimentary half‐space, with the addition of two borehole casings extending 300 m into the seafloor. In this case, results show that the distortion produced by casings located within a 100 m safety zone of the CSEM system will be measured at 4 of the 5 receivers. We conclude that the boreholes must be positioned at least 200 m away from the CSEM array so as to minimize the effects of the casings.     

Plasmaspheric hiss overview and relation to chorus

A brief overview is given of the history of plasmaspheric hiss research, particularly in the context of the recent work by Bortnik et al. (2008) indicating that chorus could be the likely source of plasmaspheric hiss. Previous suggestions given in the literature for this theory are reviewed and then the mechanism itself is outlined, focusing on the characteristic cyclical trajectories executed by typical ray paths that enter into the plasmasphere. A number of directional propagation studies performed in the past are then discussed as well as other work which bears relevance to the present mechanism.     

Evaluating Quaternary dating methods: Radiocarbon,U-series,luminescence, and amino acid racemization dates of a late Pleistocene emu egg

A whole emu egg, with infilling sediment believed to be coeval with egg laying and burial, was found in late Pleistocene lunette sediments near Lake Eyre, central Australia. The stratigraphic context and initial amino acid racemization (AAR) results suggested an age between 25 ka and 35 ka, ideal for a multiple cross-dating comparison. The sediment infilling the egg provided material for luminescence dating that minimized problems of association. Age estimations from AAR, ¹⁴C and U series methods were obtained from the eggshell and optically stimulated luminescence (OSL) of the infilling sediment. All methods agreed within their respective dating uncertainties confirming the utility of all four methods. They indicate an age for the emu egg of 31.24 ± 0.34 ka.     

Stratigraphic evolution of an aeolian erg margin system: the Permian Cedar Mesa Sandstone, SE Utah, USA

The Permian Cedar Mesa Sandstone of south‐east Utah is a predominantly aeolian succession that exhibits a complex spatial variation in sedimentary architecture which, in terms of palaeogeographic setting, reflects a transition from a dry erg centre, through a water table‐controlled aeolian‐dominated erg margin, to an outer erg margin subject to periodic fluvial incursion. The erg margin succession represents a wet aeolian system, accumulation of which was controlled by progressive water table rise coupled with ongoing dune migration and associated changes in the supply and availability of sediment for aeolian transport. Variation in the level of the water table relative to the depositional surface determined the nature of interdune sedimentary processes, and a range of dry, damp and wet (flooded) interdune elements is recognized. Variations in the geometry of these units reflect the original morphology and the migratory behaviour of spatially isolated dry interdune hollows in the erg centre, locally interconnected damp and/or wet interdune ponds in the aeolian‐dominated erg margin and fully interconnected, fluvially flooded interdune corridors in the outer erg margin. Relationships between aeolian dune and interdune units indicate that dry, damp and wet interdune sedimentation occurred synchronously with aeolian bedform migration. Temporal variation in the rates of water‐table rise and bedform migration determined the angle of climb of the erg margin succession, such that accumulation rates increased during periods of rapidly rising water table, whereas sediment bypassing (zero angle of climb) occurred in the aftermath of flood events in response to periods of elevated but temporarily static water table. During these periods in the outer erg margin, the expansion of fluvially flooded interdunes in front of non‐climbing but migrating dunes resulted in the amalgamation of laterally adjacent interdunes and the generation of regionally extensive bypass (flood) supersurfaces. A spectrum of genetic depositional models is envisaged that accounts for the complex spatial and temporal evolution of the Cedar Mesa erg margin succession.     

Fluxes of Sr into the headwaters of the Ganges

Himalayan weathering is recognized as an important agent in modifying sea water chemistry, but there are significant uncertainties in our understanding of Himalayan riverine fluxes. This paper examines causes of the variability, including that of the seasons, by analysis of downstream variations in Sr, ⁸⁷Sr, and major ions in the mainstream, in relation to the composition of tributary streams from subcatchments with differing geologic substrates.Water samples were collected over four periods spanning the premonsoon, monsoon, and postmonsoon seasons. Uncertainties in the relative fluxes have been estimated, using Monte Carlo techniques, from the short-term variability of mainstream chemistry and the scatter of tributary compositions. The results show marked seasonal variations in the relative inputs related to high monsoon rainfall in the High and Lesser Himalaya, contrasting with the major contribution from glacial melt waters from the Tibetan Sedimentary Series (TSS) at times of low rainfall. Much of the spread in previously published estimates of the sources of Sr in Himalayan rivers may result from these seasonal variations in Sr fluxes.The annual fluxes of Sr into the headwaters of the Ganges are derived from the three main tectonic units in the proportions 35 ± 1% from the TSS, 27 ± 3% from the High Himalayan Crystalline Series (HHCS), and 38 ± 8% from the Lesser Himalaya. The particularly elevated ⁸⁷Sr/⁸⁶Sr ratios characteristic of the HHCS and the Lesser Himalaya enhance their influence on seawater Sr-isotope composition. The TSS contributes 13 ± 1%, the HHCS 30 ± 3%, and the Lesser Himalaya 57 ± 11% of the ⁸⁷Sr flux in excess of the seawater ⁸⁷Sr/⁸⁶Sr ratio of 0.709.     

Modelling of elastic damping in nonlinear time-history analyses of cantilever RC walls

Damping constitutes a major source of uncertainty in dynamic analysis and an open issue to experimental and analytical research. After a thorough review of the current views and approaches existing in literature on damping and its appropriate modelling, this paper focuses on the implications of the available modelling options on analysis. As result of a series of considerations, a damping modelling solution for nonlinear dynamic analyses of cantilever RC walls is suggested within the frame of Direct Displacement-Based Design, supported by comparative analyses on wall structures.