The influence of sampling design on spatial data quality in a geographic citizen science project

Geographic citizen science has much potential to assist in wildlife research and conservation, but the quality of observation data is a key concern. We examined the effects of sampling design on the quality of spatial data collected for a koala citizen science project in Australia. Data were collected from three samples—volunteers (n = 454), an Internet panel (n = 103), and landowners (n = 35)—to assess spatial data quality, a dimension of citizen science projects rarely considered. The locational accuracy of koala observations among the samples was similar when benchmarked against authoritative data (i.e., an expert‐derived koala distribution model), but there were differences in the quantity of data generated. Fewer koala location data were generated per participant by the Internet panel sample than the volunteer or landowner samples. Spatial preferences for land uses affecting koala conservation were also mapped, with landowners more likely to map locations for residential and tourism development and volunteers less likely. These spatial preferences have the potential to influence the social acceptability of future koala conservation proposals. With careful sampling design, both citizen observations and land use preferences can be included within the same project to augment scientific assessments and identify conservation opportunities and constraints.     

What do biphasic flow experiments reveal on the variability of exposure on alluvial fans and which implications for risk assessment result from this?

Sudden avulsions, unexpected channel migrations and backfilling phenomena are autogenic phenomena that can considerably change the propagation patterns of sediment-laden flows on alluvial fans. Once the initial and boundary conditions of the hazard scenario with a given return period are determined, the assessment of the associated exposed areas is based on one numerical, essentially deterministic, process simulation which may not adequately capture the underlying process variability. We generated sediment-laden flows on an experimental alluvial fan by following a “similarity-of-process concept”. Specifically, we considered a convexly shaped alluvial fan model layout featuring a curved guiding channel. As loading conditions, we defined a reference, an increased and a reduced level for the released water volume and the predisposed solid fraction, respectively. Further, we imposed two different stream power regimes and accomplished, for each factor combination, eight experimental runs. The associated exposure areas were recorded by video and mapped in a GIS. We then analysed exposure data and determined exposure probability maps superposing the footprints of the eight repetitions associated with each experimental loading condition. The patterns of exposure referred to the specific loading conditions showed a noticeable variability related to the main effects of the total event volume, the solid fraction, the interactions between them, and the imposed stream power in the feeding channel. Our research suggests that adopting a probabilistic notion of exposure in risk assessment and mitigation is advisable. Further, a major challenge consists in adapting numerical codes to better reflect the stochastics of process propagation for more reliable flood hazard assessments.

     

Archean adakites from the Ashuanipi complex,eastern Superior Province,Canada: geochemistry,geochronology and tectonic significance

Contributions to Mineralogy and Petrology - Adakitic geochemical features characterize the Desliens suite of pre-tectonic diorite to tonalite sills intruded into volcanogenic greywackes of the...     

The anatomy of natural disasters on online media: hurricanes and wildfires

Natural Hazards - Increasing prevalence and scale of natural disasters fuel the need for new approaches to evaluating, and eventually mitigating, their impact. This analysis quantifies and compares...     

Comprehensive Parametrization of Surface-Layer Transfer Coefficients for Use in Atmospheric Numerical Models

A new non-iterative bulk parametrization for surface-layer transfer coefficients for momentum and heat is presented. It is applicable for a wide range of aerodynamic and thermal roughness lengths, and includes the effect of the roughness sublayer. As a consequence, the non-iterative method is suitable for every surface type, especially for urban surfaces for which existing non-iterative parametrizations fail. The analytical approximation compares very well with an iterative approach. Our method can be easily implemented in atmospheric numerical models that already employ a non-iterative approach.     

Geochemical evidence of the renewal of volcanic activity inferred from CO<Subscript>2</Subscript> soil and SO<Subscript>2</Subscript> plume fluxes: the 2007 Stromboli eruption (Italy)

On 27 February 2007, a new eruption occurred on Stromboli which lasted until 2 April. It was characterized by effusive activity on the Sciara del Fuoco and by a paroxysmal event (15 March). This crisis represented an opportunity for us to refine the model that had been developed previously (2002–2003 eruption) and to improve our understanding of the relationship between the magmatic dynamics of the volcano and the geochemical variations in the fluids. In particular, the evaluation of the dynamic equilibrium between the volatiles (CO₂ and SO₂) released from the magma and the corresponding fluids discharged from the summit area allowed us to evaluate the level of criticality of the volcanic activity. One of the major accomplishments of this study is a 4-year database of summit soil CO₂ flux on the basis of which we define the thresholds (low–medium–high) for this parameter that are empirically based on the natural volcanological evolution of Stromboli. The SO₂ fluxes of the degassing plume and the CO₂ fluxes emitted from the soil at Pizzo Sopra la Fossa are also presented. It is noteworthy that geochemical signals of volcanic unrest have been clearly identified before, during and after the effusive activity. These signals were found almost simultaneously in the degassing plume (SO₂ flux) and in soil degassing (CO₂ flux) at the summit, although the two degassing processes are shown to be clearly different. The interpretation of the results will be useful for future volcanic surveillance at Stromboli.     

P–T paths reconstruction of a collisional event: The example of the Thiviers-Payzac Unit in the Variscan French Massif Central

Because of late metamorphic and tectonic overprints, the reconstruction of prograde parts of P–T paths is often difficult. In the SW Variscan French Massif Central, the Thiviers-Payzac Unit (TPU) is the uppermost allochthon emplaced above underlying units. The TPU experienced a Barrovian metamorphism coeval with a top-to-the-NW ductile shearing (D2 event) in Early Carboniferous times (ca. 360–350 Ma). The tectonic setting of the D2 event, compression or synconvergence extension, remains unclear. Using the THERMOCALC software and the model system MnNCKFMASH, the peak P–T conditions are estimated from garnet rims and matrix minerals and the prograde evolution is deduced from garnet core compositions. The combination of these two approaches demonstrates that the TPU experienced pressure and temperature increases before reaching peak conditions at 6.6–9.0 +/− 1.2 kbar and 615–655 +/− 35 °C. This kind of P–T path shows that the regional D2 event corresponds to crustal thickening.     

Nitrogen and water bubbles, oxygen isotopes, shock effects: Deciphering the history of the Bencubbin meteorite breccia

We have observed vesicles filled with heavy nitrogen gas and water vapor in three settings in the Bencubbin CB chondrite: in the mesostasis of the silicate clasts, in the mesostasis of the chondrules of an ordinary chondrite (OC) xenolith, and in grains we refer to as bubble grains, and interpret as remelted OC chondrule mesostasis. In our view, these bubbles are a local phenomenon and formed as a consequence of the impact of the OC fragment onto the Bencubbin parent body. The heavy nitrogen in the bubbles came from one or several of its carrier phases in Bencubbin, and the water came from hydrous silicates. As formulated by Meibom et al. (Meibom A., Righter K., Chabot N., Dehn G., Antignano A., McCoy T. J., Krot A. N., Zolensky M. E., Petaev M. I. and Keil K. (2005) Shock melts in QUE 94411, Hammadah al Hamra 237, and Bencubbin: remains of the missing matrix? Meteorit. Planet. Sci.40, 1377-1391) these hydrous phases, similar to the hydrated clasts now found in CH and CB_b chondrites, were probably common in the Bencubbin parent body at that time. They were later almost totally destroyed by a large scale shock event, and contributed to form the impact melt that now fills space in between the large clasts of Bencubbin. Our observations indirectly confirm this hypothesis. From our composition measurements, we infer that the silicate part of the impact melt was made in roughly equal proportions of melted phyllosilicates and melted anhydrous silicates. The oxygen isotopic composition of the impact melt is much heavier than that of the silicate clasts, probably reflecting the composition of the water at the origin of the phyllosilicates. The O isotope measurements of the OC inclusion chondrules present some features that seem to be common in OCs: a composition of the chondrule crystals slightly lighter than that of whole chondrules, and one olivine crystal with a very light composition.     

Morphological signatures of normal faulting in low‐gradient alluvial rivers in south‐eastern Louisiana,USA

We explore the fluvial response to faulting in three low‐gradient, sand‐bed rivers in south‐eastern Louisiana, USA, that flow across active normal faults from footwall (upstream) to hangingwall (downstream). We calculate sinuosity, migration rate and migration direction in order to identify anomalies spatially associated with fault scarps. In two of the rivers we model one‐dimensional steady water flow to identify anomalies in surface water slope, width‐to‐depth ratio, and shear stress. In each of these rivers there is one location where flow modeling suggests potential channel incision through the footwall, as indicated by relatively high surface water slopes and shear stress values. In one of these footwall locations, the river straightens and width‐to‐depth ratios decrease, likely contributing to higher surface water slopes and shear stress. This is in contrast to previous studies that have proposed increased sinuosity across fault footwalls and decreased sinuosity across hangingwalls. However, in two hangingwall locations we also observe relatively less sinuous channels. Other planform changes on the hangingwall include topographic steering of channels along and towards the fault and one example of an avulsion. The most notable anomaly in migration rate occurs on the hangingwall of a fault where a river has cut off a meander loop. Although fluvial response to faulting varies here, comparatively large and small channels exhibit similar responses. Further, Pleistocene fault slip rates are orders of magnitude lower than the channel migration rates, suggesting that faulting should not be a major influence on the fluvial evolution. Nonetheless, notable channel anomalies exist near faults, suggesting that recent fault slip rates are higher than Pleistocene rates, and/or that low‐gradient alluvial channels are more sensitive to faulting than previous studies have suggested. Rivers appear to be influenced by faulting in this setting, however background rates of meander loop cutoff may be just as influential as faulting. Copyright © 2015 John Wiley & Sons, Ltd.