Mapping land subsidence over the eastern Beijing city using satellite radar interferometry*

Beijing City has suffered from groundwater-induced subsidence since the late 1930s and the over-exploration of groundwater could lead to subsidence as much as ?12.0 cm?yr^?1. Previous studies on the ground deformation at Beijing City mainly focused on the period before the year of 2014 when a mega-engineering project was launched to reduce water shortage in Beijing. To study the most recent ground deformation, 19 L-band ALOS-1 PALSAR images (June 2007–January 2011), 24 C-band Sentinel-1 SAR images (June 2015–November 2016) together with 9 ALOS-2 PALSAR acquisitions (September 2014–February 2017) were analysed in this work. Levelling measurements were exploited to verify the ALOS-1-based time series InSAR (TS-InSAR) result while Sentinel-1 and ALOS-2 result were cross-verified with each other. Furthermore, the whole study area was divided into four sub-zones, and the result indicated that the subsidence rates over five townships, Cuigezhuan, Jinzhan, Liyuan, Songzhuang and Yanjiao were accelerating and more attentions should be paid. On the contrary, the town centre of Douge Zhuang township experienced a decreasing trend between these two temporal-periods. Additionally, the time series measurements with respect to five selected measurement points and the profile line along the subsidence hot spots were analysed.     

Enhancement of polysulfone membrane with integrated ZnO nanoparticles for the clarification of sweetwater

Clarification is one of the main steps in producing glycerin from glycerin–rich solution (namely sweetwater) in oleo-chemical industry. In this study, ZnO nanoparticles (9–12 nm in diameter) were incorporated into polysulfone (PSf) membranes to improve the membrane antifouling properties toward the fatty acids in sweetwater. The hybrid membranes were fabricated through wet phase inversion method. The modified membranes exhibited better water permeability, membrane surface hydrophilicity (improvement from 82° to 62.1°) and resistance toward fouling by fatty acids. In this study, the best membrane was obtained in the presence of 3% of ZnO nanoparticles, which showed good fouling resistance, high solution flux and a very high rejection of fatty acids (≥80%) in comparison with the pure PSf membranes, at the same experimental conditions. The enhanced membrane performances during the clarification of sweetwater were attributed to the unique properties of ZnO nanoparticles that were uniformly dispersed in the PSf structures.     

New impact equation using barrier Froude number for the design of dual rigid barriers against debris flows

Landslides - In the design of multiple rigid barriers, the height of the first barrier governs the impact dynamics of debris flow on the next barrier in a channel. However, current design...     

Spatiotemporal modelling of rainfall-induced landslides using machine learning

Landslides - Natural terrain landslides are mainly triggered by rainstorms in Hong Kong, which pose great threats to life and property. To mitigate landslide risk, building a prediction model which...     

Smooth particle hydrodynamics modelling of liquid-sediment system and coastal wave breaker

Ocean Dynamics - In this paper, a two-phase coastal liquid-sediment system and a wave breaker were numerically simulated using a particle-based smooth particle hydrodynamics (SPH). To verify the...     

Effects of particle size of mono-disperse granular flows impacting a rigid barrier

Understanding the interaction between complex geophysical flows and barriers remains a critical challenge for protecting infrastructure in mountainous regions. The scientific challenge lies in understanding how grain stresses in complex geophysical flows become manifested in the dynamic response of a rigid barrier. A series of physical flume tests were conducted to investigate the influence of varying the particle diameter of mono-dispersed flows on the impact kinematics of a model rigid barrier. Particle sizes of 3, 10, 23 and 38 mm were investigated. Physical tests results were then used to calibrate a discrete element model for carrying out numerical back-analyses. Results reveal that aside from considering bulk characteristics of the flow, such as the average velocity and bulk density, the impact load strongly depends on the particle size. The particle size influences the degree of grain inertial stresses which become manifested as sharp impulses in the dynamic response of a rigid barrier. Impact models that only consider a single impulse using the equation of elastic collision warrant caution as a cluster of coarse grains induce numerous impulses that can exceed current design recommendations by several orders of magnitude. Although these impulses are transient, they may induce local strucutral damage. Furthermore, the equation of elastic collision should be adopted when the normalized particle size with the flow depth, δ/h, is larger than 0.9 for Froude numbers less than 3.5.     

Influence of structure on the compression and shear behaviour of a saturated lateritic clay

Lateritic clay is well recognized to contain significant amount of iron and aluminium oxides (sesquioxide). These oxides enhance the formation of soil aggregates which would greatly affect soil structure. So far, no study has been carried out purposely to investigate the influence of aggregate-dependent structure on the mechanical behaviour of the lateritic clay. In this study, structure effects on the compression and shear behaviour of a saturated lateritic clay were studied. Intact, recompacted and reconstituted specimens were studied through oedometer, isotropic compression and consolidated undrained shear tests. Microstructure of these specimens was determined using the mercury intrusion porosimetry and scanning electron microscopy (SEM) techniques and then used to explain the observed behaviour. It was found that the compressibility of recompacted/reconstituted specimens was about 90% larger than intact specimen. Different from soft clay, the influence of microstructure does not show an obvious reduction in compressibility after yielding. The peak shear strength of intact specimen was about 100% higher than those of reconstituted/recompacted specimens. The significant difference in compression and shear behaviour is mainly because the aggregates of intact specimen were about 90% larger than those of reconstituted/recompacted specimens, as revealed by the SEM results. As a result, particle contacts forming the force chain were therefore larger in the intact specimen. The intact specimen therefore became less compressible and more dilative.

     

Constitutive modelling of state-dependent behaviour of unsaturated soils: an overview

An unsaturated soil is a three-phase material that is ubiquitous on the earth’s surface. The fully saturated and completely dry states are just two limiting conditions of an unsaturated soil. The state and properties of unsaturated soils can change significantly with external loads, weather conditions and groundwater level. Proper modelling of the state-dependent behaviour of unsaturated soils is crucial for analysing the performance of almost all civil engineering structures. So far, there are many unsaturated soil models and several relevant review papers in the literature. None of the existing review papers, however, focused on the state dependency of unsaturated soil behaviour. Moreover, some aspects of soil behaviour have not been reviewed, including small strain stiffness, dilatancy and stress-dependence of water retention curve. In the current review paper, the state dependency of unsaturated soil behaviour is reviewed, with a particular attention to the three missing parts. The review is carried out in a unified and relatively simple constitutive framework, which adopts a three-by-three compliance matrix to link incremental volumetric strain, deviator strain and degree of saturation to incremental mean net stress, deviator stress and suction. All of the nine variables in the proposed three-by-three compliance matrix have clear physical meanings and can be measured through compression, shearing and water retention tests. Theoretical models based on other constitutive stress variables can be also converted to this framework by matrix transformation.

     

A study of polychlorinated dibenzo-p-dioxins/furans (PCDD/Fs) and polychlorinated biphenyls (PCBs) in the livestock waste compost of Hong Kong, PR China

Composting is one of the waste disposal methods adopted for disposal of livestock waste in Hong Kong. The composting livestock waste normally undergoes 6-8 weeks fermentation, followed by 16-20 weeks maturation. The matured compost is sold as soil conditioner in the local market. In 2006, feedstock material and a time-series of compost samples were collected throughout the fermentation and maturation process from the Sha Ling Composting Plant in the New Territories. The feedstock material and compost samples were analyzed for contents of three unintentional persistent organic pollutants (POPs), i.e. dioxins/furans, dioxin-like PCBs and total PCBs. These POPs are unintentionally produced by-products of chemical industrial processes and combustion processes. Selected heavy metals were also analyzed, which served as conservative tracers to determine potential mass loss during the composting process. Levels of contamination by these POPs were found to be low in the matured compost for sale. The mean concentrations (lower-upper bound) of total dioxins/furans, total dioxin-like PCBs and total PCBs were 2.01-2.05 ng I-TEQ/kg dw, 0.04-0.05 ng WHO-TEQ/kg dw and 1.55-1.55 microg/kg dw, respectively. Progressively elevated levels of these POPs were observed in the compost samples during the fermentation process. Analysis of the congener profiles revealed that the heptaCDD and octaCDD were the main contributors to the observed increase in dioxin/furan content. The possible sources of dioxins/furans in the compost were discussed. The study results established a local dioxins/furans emission factor specific to the trade and provided a better estimate of the annual dioxins/furans emission for the livestock waste composting activity in Hong Kong.