RADON DEPTH MIGRATION1

A depth migration method is presented that uses Radon-transformed common-source seismograms as input. It is shown that the Radon depth migration method can be extended to spatially varying velocity depth models by using asymptotic ray theory (ART) to construct wavefield continuation operators. These operators downward continue an incident receiver-array plane wave and an assumed point-source wavefield into the subsurface. The migration velocity model is constrained to have longer characteristic wavelengths than the dominant source wavelength such that the ART approximations for the continuation operators are valid. This method is used successfully to migrate two synthetic data examples:

• 1 a point diffractor, and
• 2 a dipping layer and syncline interface model.

It is shown that the Radon migration method has a computational advantage over the standard Kirchhoff migration method in that fewer rays are computed in a main memory implementation.     

The “Zero-order Model” revisited: Paul Schindler's influence on the development of trace metal scavenging models

In 1975 Paul Schindler produced the first oceanic trace metal scavenging model to explicitly include the role of surface chemistry as a control on trace metal water column residence times. The eighteen years that have elapsed since the publication of Schindler's seminal paper have seen the development of a variety of oceanic scavenging models; yet, the fundamental insight of his Zero-order Model remains the benchmark. This paper describes the role of Paul Schindler's work on surface chemistry in providing a framework for the current generation of trace element scavenging models.     

Origin and differentiation of picritic arc magmas,Ambae (Aoba), Vanuatu

Key aspects of magma generation and magma evolution in subduction zones are addressed in a study of Ambae (Aoba) volcano, Vanuatu. Two major lava suites (a low-Ti suite and high-Ti suite) are recognised on the basis of phenocryst mineralogy, geochemistry, and stratigraphy. Phenocryst assemblages in the more primitive low-Ti suite are dominated by magnesian olivine (mg 80 to 93.4) and clinopyroxene (mg 80 to 92), and include accessory Cr-rich spinel (cr 50 to 84). Calcic plagioclase and titanomagnetite are important additional phenocryst phases in the high-Ti suite lavas and the most evolved low-Ti suite lavas. The low-Ti suite lavas span a continuous compositional range, from picritic (up to 20 wt% MgO) to high-alumina basalts (<5 wt% MgO), and are consistent with differentiation involving observed phenocrysts. Melt compositions (aphyric lavas and groundmasses) in the low-Ti suite form a liquid-line of descent which corresponds with the petrographically-determined order of crystallisation: olivine + Cr-spinel, followed by clinopyroxene + olivine + titanomagnetite, and then plagioclase + clinopyroxene + olivine + titanomagnetite. A primary melt for the low-Ti suite has been estimated by correcting the most magnesian melt composition (an aphyric lava with 10.5 wt% MgO) for crystal fractionation, at the oxidising conditions determined from olivine-spinel pairs (fo₂ FMQ + 2.5 log units), until in equilibrium with the most magnesian olivine phenocrysts. The resultant composition has 15 wt% MgO and an mg ^Fe2 value of 81. It requires deep (3 GPa) melting of the peridotitic mantle wedge at a potential temperature consistent with current estimates for the convecting upper mantle (T _p 1300°C). At least three geochemically-distinct source components are necessary to account for geochemical differences between, and geochemical heterogeneity within, the major lava suites. Two components, one LILE-rich and the other LILE- and LREE-rich, may both derive from the subducting ocean crust, possibly as an aqueous fluid and a silicate melt respeetively. A third component is attributed to either differnt degrees of melting, or extents of incompatible-element depletion, of the peridotitic mantle wedge.     

Alkaline and ultramafic carbonate lamprophyres in Central Bohemian carboniferous basins,Czech Republic

Summary Dykes of alkaline and ultramafic carbonate lamprophyres (monchiquite-ouachitite and aillikite) intrude the Carboniferous sediments of Central Bohemia. Their characteristic feature is the presence of substantial amounts of a sodalite group mineral (presumably haüyne), carbonate and barite. Isotopic compositions of ¹³C (–3.4 to –6.2) and ¹⁸O ( + 13.5 to + 15.9) indicate that the carbonate is of primary magmatic origin and that fluids were formed at temperatures of 500 to 350°C. High contents of CO₂ (3.6 to 17.6 wt.%) and incompatible elements, high LREE/HREE ratios (30.0 to 57.7), and low Rb/Sr (0.025 to 0.078) and⁸⁷Sr/⁸⁶Sr (0.7038 to 0.7042) ratios suggest the ultramafic lamprophyres are related to deep-seated carbonated magmas of mantle origin. Low degree of partial melting ( < 1%) of the mantle peridotite is envisaged, with additional transport of fluids rich in incompatible elements into the crustal chamber. Alkaline lamprophyres are fractionated derivatives which originated from the same source. Magma intrusion from different levels of a magma chamber into fracture zones under horizontal tension without a central intrusion could result in variability in lamprophyre composition (cumulates or evolved derivatives).

---

Alkalische und ultramafische Karbonat-Lamprophyre der zentralen böhmischen Karbonbecken, Tschische Republik

Zusammenfassung Alkalische und ultramafische Karbonat-Lamprophyrgänge (Monchiquit-Ouachitit und Aillikit) intrudieren in karbonische Sedimente Zentralböhmens. Sie sind charakterisiert durch das Auftreten von beträchtlichen Mengen an Mineralen der Sodalith-Gruppe (v.a. Haüyn), Karbonaten und Baryt. Ihre Isotopenzusammensetzung von ¹³C (–3.4 bis –6.2) und ¹⁸O (13.5 bis 15.9) zeigt, daß die Karbonate primär magmatischen Ursprungs sind und daß assoziierte Fluide in einem Temperaturbereich von 350 bis 500°C gebildet wurden. Hohe Gehalte an CO₂ (3.6 bis 17.6 Gew. %), inkompatiblen Elementen, hohe LREE/HREE-Verhältnisse (30.0 bis 57.7), sowie niedrige Rb/Sr—(0.025 bis 0.078) und⁸⁷Sr/⁸⁶Sr-(0.7038 bis 0.7042) Verhältnisse lassen vermuten, daß die ultramafischen Lamprophyre mit karbonatischen Magmen des Mantels in Beziehung stehen. Eine niedrige Aufschmelzungsrate ( < 1%) von Mantelperidotit mit zusätzlichem Transport von, an inkompatiblen Elementen angereicherten Fluiden, in die krustale Magmenkammer wird diskutiert. Alkalische Lamprophyre sind als stärker fraktionierte Magmen, die derselben Quelle entstammen, zu verstehen. Die Intrusion der aus verschiedenen Bereichen der Magmenkammer stammenden Magmen in durch horizontale Dehnung verursachte Störungszonen könnte das Fehlen eines zentralen Intrusionskörpers und die unterschiedliche Zusammensetzung der Lamprophyre (Kumulate oder entwickelte Derivate) erklären.

---

---

With 8 Figures     

Primitive island arc and oceanic lavas from the hunter ridge-hunter fracture zone. Evidence from glass,olivine and spinel compositions

Summary At its southernmost end, the main spreading centre of the North Fiji Basin is propagating into arc crust of the poorly-known Hunter Ridge. We define nine magmatic groups from major element glass chemistry and olivine and spinel compositions in samples dredged from twenty six sites in this area by the R/V Academician A. Nesmeyanov in 1990. These include groups of boninites, island arc tholeiites (IAT), mid-ocean ridge basalts (MORB), enriched mid-ocean ridge basalts (E-MORB), olivine porphyritic andesites and basaltic andesite and Na-rhyolites. Primitive lavas containing highly forsteritic olivine phenocrysts are common in all the groups, except for the rhyolites.We report over 100 glass analyses for dredged rocks from this region, and about 300 olivine-spinel pairs for representatives of all the magmatic groups identified, except the Na-rhyolites.The MORB in this region are probably produced at the propagating spreading centre in the southern part of the North Fiji Basin. Juxtaposition of shallow, hot MORB-source diapirs supplying the MORB in this area, and the sub-arc damp, refractory upper mantle beneath the Hunter Ridge, provides suitable petrogenetic conditions to produce a range of magma types, from island arc tholeiites through to high-Ca boninites. The latter were recovered in eleven dredges.The E-MORB lavas recovered from the extreme southern margin of the North Fiji Basin are shown to be essentially identical to those dredged from adjacent older South Fiji Basin crust. It is hypothesized that the former were either scraped off the South Fiji Basin crust during an episode of oblique subduction that may have generated the Hunter Ridge during the last 5 Myr, or alternatively, that slices of the South Fiji Basin crust were trapped and incorporated into the North Fiji Basin as the subduction zones fronting the Vanuatu arc stepped or propagated southward.

---

Primitive Inselbogen- und ozeanische Laven von Hunter Rücken und der Hunter BruchZone: die Bedeutung der Zusammensetzung von Glas, Olivin und Spinell

Zusammenfassung Das spreading centre des Nord-Fidschi-Beckens setzt sich an seinem südlichsten Ende in die Inselbogen-Kruste des noch wenig bekannten Hunter-Rückens fort.Wir definieren 9 magmatische Gruppen auf der Basis der Hauptelement-Zusammensetzung von Gläsern und der Zusammensetzung von Olivin und Spinell in Proben die das Forschungsschiff R/V Akademiker A. Nesmeyanov von 26 Stellen im Jahr 1990 aufgesammelt hat. Zu diesen gehören Gruppen von Boniniten, Inselbogentholeiiten (IAT), Basalten zentralozeanischer Rücken (MORB), angereicherte zentralozeanische Rücken (E-MORB), Olivin-porphyritische Andesite und basaltische Andesite, sowie Na-Rhyolite. Primitive Laven mit Olivinkristallen, die reich an Forsterit-Komponenten sind, kommen in allen diesen Gruppen, mit Ausnahme der Rhyolite, vor.Wir legen über 100 Glas-Analysen von Gesteinen aus diesem Gebiet vor und über 300 Olivin-Spinell-Paare für Vertreter aller der hier identifizierten magmatischen Gruppen, mit Ausnahme der Natriumrhyolite.Die MORB in diesem Gebiet sind wahrscheinlich an dem aktiven Spreading Center im Südteil des Nord-Fidschi-Beckens entstanden. Das nebeneinander Vorkommen von seichten heißen MORB-Quellen Diapiren, die MORB in diesem Gebiet erzeugen, und der Sub-Inselbogen, wasserhaltige, refraktäre obere Mantel unter dem Hunter Rücken führen zu geeigneten petrogenetischen Bedingungen für die Entstehung einer Vielfalt von Magmatypen, von Inselbogentholeiiten bis zu sehr Kalziumreichen Boniniten. Die letzteren wurden in 11 Dredge-Proben gefunden.Die E-MORS Laven, die aus dem extremen Südteil des Nord-Fidschi-Beckens entnommen wurden, sind im wesentlichen mit jenen identisch, die aus der benachbarten älteren Kruste des Süd-Fidschi-Beckens stammen. Es wird vermutet, daß die letzteren entweder aus dem Süd-Fidschi-Becken während einer Episode obliger Subduktion, die in den letzten 5 Millionen Jahren zur Entstehung des Hunter Ridge geführt hat, abgeschert wurden, oder auch daß Teile der Kruste des Süd-Fidschi-Beckens in das Nord-Fidschi-Becken inkorporiert wurden als Subduktionszonen gegenüber dem Vanuato-Bogen sich nach Süden fortbewegten.

     

Cesstibtantite—a geologic introduction to the inverse pyrochlores

Summary The crystal structure of cesstibtantite has been solved from diffractometer data collected on samples from Leshaia, Russia and the Tanco pegmatite, Manitoba. Cesstibtantite from the Leshaia pegmatite (type locality) hasa 10.515(2) Å, space groupFd3m, composition Cs_0.31(Sb_0.57Na_0.31Pb_0.02Bi_0.01)_O.91(Ta_1.88Nb_0.12)₂(O_5.69[OH, F]_0.31)₆(OH, F)_0.69, Z 8; its structure was refined toR 3.8,wR 4.3% using 96 observed (F > 3[F]) reflections (MoK). Cesstibtantite from the Tanco pegmatite hasa 10.496(1) Å, space groupFd3m, composition (Cs_0.22K_0.01)_0.23(Na_0.45Sb_0.39Pb_0.14· Ca_0.06Bi_0.02)_1.06(Ta_1.95Nb_0.05)₂(O_5.78[OH,F]_0.22)₆(OH,F)_0.55,Z 8; its structure was refined toR 3.9w R 3.7% using 104 observed reflections. Cesstibtantite differs from the normal pyrochlores in that it contains significant amounts of very large cations such as Cs. As these cations are too large (^VIII[r] > 1.60 Å) for the conventional [8]-coordinated A site, they occupy the [18]-coordinated site, which normally contains monovalent anions. Natural cesstibtantite samples are non-ideal in that both Cs and monovalent anions occur at the site; thus cesstibtantite is intermediate to thenormal pyrochlores (with only monovalent anions at the site) and theinverse pyrochlores (with only large cations at the site).

---

Cesstibtantit—eine geologische Einfiihrung in die inversen Pyrochlore

Zusammenfassung Die Kristallstruktur von Cesstibtantit wurde auf der Basis von Diffraktometerdaten von Proben von Leshaia, Russland and dem Tanco Pegmatit, Manitoba, gelöst. Cesstibtantit aus dem Leshaia Pegmatit (Typlokalität) hat a 10.515(2) Å, RaumgruppeFd3m, die Zusammensetzung CS_0.31(Sb_0.57Na_0.31Pb_0.02Bi_0.01)_0.91(Ta_1.88Nb_0.12)₂· (O_5.69OH, F_0.31)₆(OH, F)_0.69 Z 8; die Struktur wurde aufR 3.8,wR 4.3% verfeinert unter Benützung von 96 beobachteten Reflexen. Cesstibtantit vom Tanco Pegmatit hat a 10.496(1) Å, RaumgruppeFd3m, die Zusammensetzung (Cs_0.22K_0.01)_0.23(Na_0.45· Sb_0.39Pb_0.14Ca_0.06Bi_0.02)_1.06(Ta_1.95Nb_0.05)₂(O_5.78OH,F_0.22)₆(OH,F)_0.55,Z 8; seine Struktur wurde aufR 3.9wR 3.7% auf der Basis von 104 beobachteten Rettexen verfeinert. Cesstibtantit unterscheidet sich von normalen Pyrochloren insofern, als er signifikante Mengen von sehr großen Kationen, wie z.B. Cs enthält. Da these Kationen zu groß sind (^VIII r 1.60 Å) für eine konventionelle [8]-koordinierteA Stelle, nehmen she die [18]-koordinierten Positionen ein, welche normalerweise monovalente Anionen enthalten. Natürliche Cesstibtantitproben sind nicht ideal insofern als sowohl Cs als auch monovalente Anionen in der Position vorkommen. Somit ist Cesstibtantit intermediär zu den normalen Pyrochloren (mit nur monovalenten Anionen auf der Position) and den inversen Pyrochloren (mit ausschließlichen großen Kationen an der Position).

     

An occurrence of ardennite in quartz veins in piemontite schist,Western Otago,New Zealand

Summary Ardennite of complex composition: (Mn²⁺ _3.488Ca_0.509Ba_0.002)₌₄(Mg_0.916916 Fe³⁺ _0.165 Mn³⁺ _0.099Cu_0.033Ni_0.009Zn_0.006 Ti_0.008Al_4.764)₌₆(As⁵⁺ _0.823V⁵⁺ _0.022P_0.005B_0.069Al_0.042Si_5.039)₌₆O_21.81(OH)_6.17 occurs in crack-seal quartz veins in quartz-albite-piemontite-spessartine-phengitehematite-chlorite-rutile-tourmaline ± calcite schist of the Haast Schist Group near Arrow Junction, western Otago, New Zealand. The Mn²⁺/Mn³⁺-ratio is sensitive to calculations and to accuracy of analyses. Boron is detected in ardennite for the first time. Other properties include = 1.734(3), = 1.735(3), = 1.751(3), 2V_Z = 30(2)°;a = 8.721(1),b = 5.816(1),c = 18.545(3) Å,V = 940.7(2) ų. Associated mineral phases are spessartine, hematite, piemontite containing 0.7% SrO and 0.06% PbO, and phengite. Later-stage vein minerals comprise chlorite, albite, and manganoan calcite which were deposited under less highly oxidizing conditions. Digenite with minor intergrown covellite occurs in small amount with manganoan calcite and quartz in a cross-cutting late-stage veina chalcopyrite and native copper occur in other late-stage veins. Arsenic and other components of the ardennite and associated minerals are derived from highly oxidized ferromanganese oxide- and hydroxide-bearing siliceous pelagic sediments that formed the protolith for the piemontite schist. The veins formed at a relatively early stage after metamorphism peaked in the chlorite zone of the greenschist facies under conditions that have been estimated at about 4.5 kbar, 390 °C.

---

Vorkommen von Ardennit in Quarzgängen aus Piemontit-Schiefern, West-Otago, Neuseeland

Zusammenfassung Ardennit mit der Zusammensetzung (Mn²⁺ _3.488Ca_0.509Ba_0.002)₌₄(Mg_0.916Fe³⁺ _0.165Mn³⁺ _0.099Cu_0.033Ni_0.009Zn_0.006 Ti_0.008Al_4.764)₌₆(As⁵⁺ _0.823V⁵⁺ _0.022P_0.005B_0.069Al_0.042Si_5.039)₌₆O_21.81(OH)_6.17 tritt in Crack-seal-Quarzgängen in Quarz-Albit-Piemontit-Spessartin-Phengit-Hämatit-Chlorit-Rutil-Turmalin ± Calcit-Schiefern der Haast Schiefer-Gruppe nahe der Arrow Junction, West-Otago, Neuseeland, auf. Die Proportionen von Mn²⁺/Mn³⁺ hängen von der Kalkulation und der Genauigkeit der Analyse ab. Bor wird zum ersten Mal im Ardennit bestimmt. Andere Eigenschaften sind: = 1.734(3), = 1.735(3), = 1.751(3), 2Vz = 30(2)°; a = 8.721(1), b = 5.816(1), c = 18.545(3) Å, V = 940.7(2) Å3. Assoziierte Mineralphasen sind Spessartin, Hämatit, Piemontit, der 0.7% SrO und 0.06% PbO enthält und Phengit. Spät gebildete Gangmineralien, wie Chlorit, Albit und Mn-Calcit, sind unter geringer oxidierenden Bedingungen entstanden. Digenit mit etwas Covellin tritt in kleinen Mengen zusammen mit Mn-Calcit und Quartz in einem querschlägigen Gang auf, Chalcopyrit und gediegenes Kupfer kommen in anderen späten Gängen vor. Arsen und andere Komponenten des Ardennites and der assoziierten Minerale können von hochoxidierten, Fe-Mn-Oxid- und Hydroxyd-führenden, Sireichen, pelagischen Sedimenten hergeleitet werden, die das Ausgangsgestein für den Piemontit darstellen. Die Gänge wurden in einem relativ frühen Stadium, nach dem Metamorphosehöhepunkt, innerhalb der Chloritzone der Grünschiefer-Fazies, unter ungefähr 4.5 kbar und 390°C, gebildet.

---

---

With 4 Figures     

Boron isotope variations in nature: a synthesis

The large relative mass difference between the two stable isotopes of boron, ¹⁰B and ¹¹B, and the high geochemical reactivity of boron lead to significant isotope fractionation by natural processes. Published ¹¹B values (relative to the NBS SRM-951 standard) span a wide range of 90. The lowest ¹¹B values around — 30 are reported for non-marine evaporite minerals and certain tourmalines. The most ¹¹B-enriched reservoir known to date are brines from Australian salt lakes and the Dead Sea of Israel with ¹¹B values up to +59. Dissolved boron in present-day seawater has a constant world-wide ¹¹B value of + 39.5. In this paper, available ¹¹B data of a variety of natural fluid and solid samples from different geological environments are compiled and some of the most relevant aspects, including possible tracer applications of boron-isotope geochemistry, are summarized.

---

Résumé La grande différence relative de masse entre les isotopes stables du bore, ¹⁰B et ¹¹B, et la grande réactivité geochimique du bore ont pour conséquence un fractionnement isotopique naturel important. Les valeurs de ¹¹B publiées (par rapport au standard NBS SRM-951) varient de 90. Les valeurs de ¹¹B les plus basses (–30) correspondent aux evaporites non-marines et à certaines tourmalines. Le réservoir le plus enrichi en ¹¹B est représenté par les saumures des lacs salés d' Australie et par la Mer Morte en Israël, qui ont des valuers de ¹¹B allent jusqu'à + 59. L'eau de mer a une valeur de ¹¹B mondialement constante de + 39.5. Des valeurs de ¹¹B des solutions naturelles ainsi que des roches et minéraux de différentes origines, publiées jusqu'à présent, sont présentées ici. En outre quelques aspects importants concernant la géochimie des isotopes du bore y compris quelques applications sont exposés.

     

Urban development policy in India with special reference to Himachal Pradesh

This paper addresses the following questions: 1) What have been the government policies, programs, and perceptions dominating the urban development scenario in India? 2) What has been the outcome of these policies and programs of urban development? 3) What should be the strategy of future urban development with reference to the Indian hill state of Himachal Pradesh? The paper critically evaluates the Indian ethos pertaining to the urbanization process, urban development policies pursued in the Five Year Plans, the current thinking on urbanization, and the main issues in urban development. It has been observed that not only is the urbanization level in Himachal Pradesh quite low, but also that the urban development here suffers from a number of serious problems. Acute shortage of building space, limited capacity to mobilize resources from their own sources, overcrowding, and slum dwelling are some such problems. Unfortunately, urbanization has not been visualized as generative of economic growth and employment opportunities both at the state and national government levels. Therefore, the major thrust of Plan policies has been to arrest rural-urban migration. However, recently there has been a desire to manage urban affairs through a new policy seeking production efficiency and cost effectiveness.     

The history and impact of air pollution at Čertovo Lake,southwestern Czech Republic

This multi-disciplinary investigation documents the longterm effects of atmospheric pollution of metals and acids on a geologically sensitive catchment in the umava Mountains, southwestern Czech Republic, a region with a long history of human disturbance. A 30 cm long sediment core (I) from ertovo Lake was analyzed for natural and artifical radionuclides, metals, diatoms, chrysophytes, and pollen in sediments accumulated during the last 200 years. A second core (II), extending to 95 cm, included sediment judged to be free of atmospheric deposition of pollutants associated with the Industrial Revolution. Chronostratigraphic markers include several changes in the pollen assemblages corresponding to well-documented changes in land-use, and distinct distributions of ¹³⁷Cs, ¹³⁴Cs and ²⁴¹Am from weapons testing and the 1986 nuclear accident at Chernobyl, Russia. These markers corroborate the ²¹⁰Pb dating and, together, produce a reliable chronology extending back nearly to 1800 A.D.Stratigraphic profiles of Cu, Pb, and Zn in Core I are unlike any previously reported in the literature. Concentrations of Cu, Pb, and Zn remain generally above 100, 400, and 200 g g^-1, respectively, for the 200 years represented by Core I. These values are unusually high for sediments from a watershed with no known heavy-metal ore bodies. Accumulation rates for Cu, Pb, and Zn, which include both atmospheric and watershed contributions, are also high (ca 1, > 1 and > 1 g cm^-2 yr^-1, respectively) for the same period, although the anthropogenic contribution of Zn rose from nearly zero at 1800 A.D. The Cu and Pb accumulation rates rose dramatically about 1640 A.D.Accumulation rates of anthropogenically-derived Be, a relatively abundant element in the soft coals of the region, are also elevated by about 0.01 g cm^-2 yr^-1 in sediments of this period. Vanadium accumulation rates increased only since 1980 A.D., presumably along with increased consumption of oil.Diatom assemblages illustrate that the lake was acidic (pH between 4.5 and 5) through at least the past 200 years. The pH declined significantly (from ca 5 to 4) between 1960 and 1985 with a slight increase to 4.5 in the last few years. Recent diatom and chrysophyte assemblages suggest high trace metal concentrations, consistent with the present lake-water chemistry.