The postglacial history of three Picea species in New England, USA

Given the difficulty of separating the three Picea species—P. glauca, P. mariana, and P. rubens (white, black, and red spruce)—in the pollen record, little is known about their unique histories in eastern North America following deglaciation. Here we report the first use of a classification tree analysis (CART) to distinguish pollen grains of these species. It was successfully applied to fossil pollen from eight sites in Maine and one in Massachusetts. We focused on the late glacial/early Holocene (14,000 to 8000 cal yr B.P.) and the late Holocene (1400 cal yr B.P. to present)—the two key periods since deglaciation when Picea has been abundant in the region. The result shows a shift from a Picea forest of P. glauca and P. mariana in the late glacial to a forest of P. rubens and P. mariana in the late Holocene. The small number of P. rubens grains identified from the late glacial/early Holocene samples (<5%) suggests that that species was either absent or rare at most of the sites. The occurrence and distribution of the three species do not reveal any geographic or temporal trend during late glacial time, but the data suggest that they were distributed in local patches on the landscape. The results of this study indicate that the recent population expansion of Picea (1000 to 500 cal yr B.P.) was likely the first time since deglaciation that P. rubens was abundant in the region.     

Heavy metal retention in secondary precipitates from a mine rock dump and underlying soil, Dalarna, Sweden

This study investigates the retention of heavy metals in secondary precipitates from a sulfidic mine rock dump and underlying podzolic soils by means of mineralogical and chemical extraction methods. The rock dump, which is at least 50 years old, consists of a 5–10-cm-thick leached zone and an underlying 110–115-cm-thick accumulation zone. Optical microscopy and electron microprobe analyses confirm that pyrrhotite weathering has proceeded much further in the leached horizon relative to the accumulation horizon. The weathering of sulfides in the leached zone has resulted in the migration of most heavy metals to the accumulation zone or underlying soils, where they are retained in more stable phases such as secondary ferric minerals, including goethite and jarosite. Some metals are temporarily retained in hydrated ferrous sulfates (e.g., melanterite, rozenite). Received: 28 October 1996 · Accepted: 24 February 1997     

An attenuation model for distant earthquakes

Large magnitude earthquakes generated at source–site distances exceeding 100km are typified by low‐frequency (long‐period) seismic waves. Such induced ground shaking can be disproportionately destructive due to its high displacement, and possibly high velocity, shaking characteristics. Distant earthquakes represent a potentially significant safety hazard in certain low and moderate seismic regions where seismic activity is governed by major distant sources as opposed to nearby (regional) background sources. Examples are parts of the Indian sub‐continent, Eastern China and Indo‐China. The majority of ground motion attenuation relationships currently available for applications in active seismic regions may not be suitable for handling long‐distance attenuation, since the significance of distant earthquakes is mainly confined to certain low to moderate seismicity regions. Thus, the effects of distant earthquakes are often not accurately represented by conventional empirical models which were typically developed from curve‐fitting earthquake strong‐motion data from active seismic regions. Numerous well‐known existing attenuation relationships are evaluated in this paper, to highlight their limitations in long‐distance applications. In contrast, basic seismological parameters such as the Quality factor (Q‐factor) could provide a far more accurate representation for the distant attenuation behaviour of a region, but such information is seldom used by engineers in any direct manner. The aim of this paper is to develop a set of relationships that provide a convenient link between the seismological Q‐factor (amongst other factors) and response spectrum attenuation. The use of Q as an input parameter to the proposed model enables valuable local seismological information to be incorporated directly into response spectrum predictions. The application of this new modelling approach is demonstrated by examples based on the Chi‐Chi earthquake (Taiwan and South China), Gujarat earthquake (Northwest India), Nisqually earthquake (region surrounding Seattle) and Sumatran‐fault earthquake (recorded in Singapore). Field recordings have been obtained from these events for comparison with the proposed model. The accuracy of the stochastic simulations and the regression analysis have been confirmed by comparisons between the model calculations and the actual field observations. It is emphasized that obtaining representative estimates for Q for input into the model is equally important.Thus, this paper forms part of the long‐term objective of the authors to develop more effective communications across the engineering and seismological disciplines. Copyright © 2003 John Wiley & Sons, Ltd.     

Karst database development in Minnesota: design and data assembly

The Karst Feature Database (KFD) of Minnesota is a relational GIS-based Database Management System (DBMS). Previous karst feature datasets used inconsistent attributes to describe karst features in different areas of Minnesota. Existing metadata were modified and standardized to represent a comprehensive metadata for all the karst features in Minnesota. Microsoft Access 2000 and ArcView 3.2 were used to develop this working database. Existing county and sub-county karst feature datasets have been assembled into the KFD, which is capable of visualizing and analyzing the entire data set. By November 17 2002, 11,682 karst features were stored in the KFD of Minnesota. Data tables are stored in a Microsoft Access 2000 DBMS and linked to corresponding ArcView applications. The current KFD of Minnesota has been moved from a Windows NT server to a Windows 2000 Citrix server accessible to researchers and planners through networked interfaces.     

Tetrahedral Plots of the Phase Relations for Basalts

The phase relations of quaternary systems are generally represented by projections onto ternary compositional planes. Such projections often obscure relationships that would only be evident in a three-dimensional tetrahedral plot. The tetrahedral plot requires that compositions of the minerals and melts be transformed into Cartesian coordinates. It is shown here how this transformation is carried out. The application is demonstrated by tetrahedral plots of experimental melt compositions of partially molten lherzolite. Furthermore, the plot can be used to evaluate whether or not a particular basaltic composition represents a primary melt. The methods are applicable to any four-component system.     

The effects of solution chemistry on the sticking efficiencies of viable Enterococcus faecalis: An atomic force microscopy and modeling study

Atomic force microscopy (AFM) and Derjaguin-Landau-Verwey-Overbeek (DLVO) theory in combination with the interaction force boundary layer (IFBL) model have been used to empirically and theoretically calculate sticking efficiencies (α) of Enterococcus faecalis cells against a silica glass surface. Sticking efficiencies were calculated in solutions of varying pH and ionic strength and related to maximum distances of transport through a hypothetical soil block using colloid filtration theory.AFM measurements show that the repulsive and attractive forces between E. faecalis cells and a glass surface are a function of ionic strength but are less sensitive to changes in solution pH. Zeta (ζ)-potential measurements of the cells and glass surfaces correlate with these trends. Calculated DLVO energy profiles predict much greater sensitivity to changing solution chemistry. Sticking efficiencies derived from AFM measurements range from 9.6 × 10⁻¹⁷ to 1 in solutions of low ionic strength (IS) and from 2.6 × 10⁻³³ to 1 at higher IS. Corresponding α values determined from DLVO theory are essentially zero in all tested solutions.Sticking efficiencies calculated in this study are smaller than values determined from column and field studies in similar systems; however, α derived from AFM data and the IFBL model more closely represent field data than do values calculated from DLVO energy values. A comparison with different methods of calculating α suggests that reversible adhesion may be significant in column-scale transport studies.     

Uranyl adsorption onto montmorillonite: Evaluation of binding sites and carbonate complexation

The fate and transport of uranium in contaminated soils and sediments may be affected by adsorption onto the surface of minerals such as montmorillonite. Extended X-ray absorption fine structure (EXAFS) spectroscopy has been used to investigate the adsorption of uranyl (UO₂²⁺) onto Wyoming montmorillonite. At low pH (∼4) and low ionic strength (10⁻³ M), uranyl has an EXAFS spectrum indistinguishable from the aqueous uranyl cation, indicating binding via cation exchange. At near-neutral pH (∼7) and high ionic strength (1 M), the equatorial oxygen shell of uranyl is split, indicating inner-sphere binding to edge sites. Linear-combination fitting of the spectra of samples reacted under conditions where both types of binding are possible reveals that cation exchange at low ionic strengths on SWy-2 may be more important than predicted by past surface complexation models of U(VI) adsorption on related montmorillonites. Analysis of the binding site on the edges of montmorillonite suggests that U(VI) sorbs preferentially to [Fe(O,OH)₆] octahedral sites over [Al(O,OH)₆] sites. When bound to edge sites, U(VI) occurs as uranyl-carbonato ternary surface complexes in systems equilibrated with atmospheric CO₂. Polymeric surface complexes were not observed under any of the conditions studied. Current surface complexation models of uranyl sorption on clay minerals may need to be reevaluated to account for the possible increased importance of cation exchange reactions at low ionic strengths, the presence of reactive octahedral iron surface sites, and the formation of uranyl-carbonato ternary surface complexes. Considering the adsorption mechanisms observed in this study, future studies of U(VI) transport in the environment should consider how uranium retardation will be affected by changes in key solution parameters, such as pH, ionic strength, exchangeable cation composition, and the presence or absence of CO₂.     

Importance of mixotrophic nanoplankton in Aysén Fjord (Southern Chile) during austral winter

Mixotrophy, the combination of autotrophic and heterotrophic nutrition in the same organism, is widespread in planktonic algae. Several reports from temperate and high-latitude fjords in Scandinavia suggest the occurrence of a niche in late summer and autumn during post-bloom conditions in which mixotrophic algae can become important grazers in pelagic ecosystems, accessing the nutrients bound in their prey to overcome nutrient limitation. Here, we experimentally determined the trophic modes and bacterivory rates for the nanoplankton community (2–20 μm) in Aysén Fjord located in the Chilean Northern Patagonia during two contrasting seasons: winter and spring. While mixotrophic nanoplankton was virtually absent from the system in spring, in winter at occasions it even constituted the dominant trophic group of the nanoplankton with abundances of >900 cells mL^?1. This indicates a second niche for mixotrophs in winter, when mixotrophy allows overcoming light limitation.     

Population structure of two deep sea tubeworms,Lamellibrachia luymesi and Seepiophila jonesi,from the hydrocarbon seeps of the Gulf of Mexico

Vestimentiferan tubeworms are a group of large sessile marine polychaete annelids (family Siboglinidae) found in the regions of hydrothermal venting or seepage of the reduced chemical hydrogen sulfide. Hydrocarbon seeps on the Louisiana Slope of the Gulf of Mexico support large communities of the co-occurring vestimentiferan species Lamellibrachia luymesi and Seepiophila jonesi. These sessile species have the opportunity to disperse between the patchy sites of active seepage on the seafloor during a planktonic larval stage. However, it is unclear whether dispersal occurs at a local or global scale. Four (L. luymesi) and seven (S. jonesi) microsatellite loci were used to test for population substructure among ten hydrocarbon seep sites on the Louisiana Slope. Both species showed high levels of allelic diversity, averaging 18.5 (L. luymesi) and 22 (S. jonesi) alleles/locus, respectively, and high observed heterozygosity at all microsatellite loci (0.71–0.9 in L. luymesi, 0.27–0.84 in S. jonesi). The two species showed a significant deficiency in heterozygotes compared to that predicted under the Hardy–Weinberg equilibrium. L. luymesi showed a small but significant amount of population structure, with a positive correlation between genetic and geographic distance among the sample sites spanning 540 km. S. jonesi, in contrast, showed no evidence for isolation by distance, but did show a significant genetic difference between aggregations of different ages. These results suggest that these two species differ in how larvae are able to colonize new seep sites through space (L. luymesi) and though time (S. jonesi).