The chronostratigraphy of a quaternary sequence at the distal part of the nile littoral cell,Haifa Bay,Israel

The current detailed chronostratigraphic framework of the last 1 Ma of an eastern Mediterranean sequence (Haifa Bay, Israel) aims to examine the relative roles of sea‐level changes, climate and tectonics. Seven continuous marine cores, up to ～120 m long, were recovered from shallow water depths. The cores were dated by optically stimulated luminescence, ¹⁴C, magnetostratigraphy, ²³⁰Th/²³⁴U, ²⁶Al/¹⁰Be, occurrence of index fossils and correlated to the global sea‐level curve and Marine Isotope Stages (MIS). The sedimentary sequence accumulated during the last ca. 1.0 Ma consists of 21 transgression–regression units with hiatuses between them. Five marine/terrestrial cycles, which occur in the lower part of the sequence, are attributed to the Jaramillo subchron and the Brunhes–Matuyama boundary, and correspond to MIS 29–21. The top ～50 m includes three sedimentary cycles deposited in the last ca. 400 ka. The regressive phases during this interval correspond to Glacial MIS 8, 6 and 2, while the transgressions correspond to Interglacial MIS 11, 7, 5 and 1. Thus, for the first time, this study documents the longest Quaternary succession dated so far in a key area of the Levant, sensitive to global history of sea‐level changes and glacial/interglacial fluctuations. Copyright © 2012 John Wiley & Sons, Ltd.     

Transition from arid to hyper-arid environment in the southern Levant deserts as recorded by early Pleistocene cummulic Aridisols

The time at which deserts established their current arid or hyper-arid conditions remains a fundamental question regarding the history of Earth. Cosmogenic isotope exposure ages of desert pavement and welded, calcic–gypsic–salic Reg soils that developed on relatively flat alluvial surfaces ～2 Ma ago in the Negev Desert indicate long geomorphic stability under extremely dry conditions. Over a short interval during their initial stage of development between 1–2 Ma, these cumulative soils are characterized by calcic soils reaching maximum stage III of carbonate morphology. This interval is the only period when calcic soil horizons formed on stable abandoned alluvial surfaces in the southern Negev Desert. Since ～1 Ma pedogenesis changed toward more arid soil environment and the formation of gypsic–salic soil horizons that were later followed by dust accumulation. The dichotomy of only moderately-developed calcic soil (stages II–III) during a relatively long time interval (10⁵–10⁶ years) indicates an arid environment that does not support continuous development but only occasional calcic soil formation. The very low δ¹⁸O and relatively high δ¹³C values of these early pedogenic carbonates support soil formation under arid climatic conditions. Such an environment was probably characterized by rare and relatively longer duration rainstorms which occasionally allowed deeper infiltration of rainwater and longer retention of soil moisture. This, in turn enabled the growth of sparse vegetation that enhanced deposition of pedogenic carbonate. At ～1 Ma these rare events of slightly wetter conditions ceased and less atmospheric moisture reached the southern Negev Desert leading to deposition of soluble salts and dust deposited in the soils. The combination of long-term hyperaridity, scarcity of vegetation and lack of bioturbation, salts cementation, dust accumulation and tight desert pavement cover, has protected the surfaces from erosion forming one of the most remarkably stable landscapes on Earth, a landscape that essentially has not eroded, but accumulated salt and dust for more than 10⁶ yr.     

Mineral composition variation in Alpine Schist, Southern Alps, New Zealand: Implications for recrystallization and exhumation

Abstract Compositional variation of silicates (plagioclase, K-feldspar, epidote, titanite, garnet, white mica, biotite, chlorite), ilmenite, carbonates (calcite, ankerite) and apatite, in quartzofeldspathic lithologies of the Alpine Schist, New Zealand, is discussed in terms of increasing metamorphic grade and possible isograd-producing reactions. The mineral data, in conjunction with geological considerations, are used to determine polychronous P-T arrays of an early high P/T event (c. 16°C/kb; 5°C/km) overprinted by a lower P/T event (c. 50°C/kb; 15°C/km) that provides an estimation of Mesozoic and Cenozoic exhumation of schist of 11 to 13 km and 19 to 22 km respectively. The effects of possible shear heating and recrystallization to form K-feldspar zone schist near the Alpine Fault is consistent with movement along a mid to lower crustal detachment surface during Cenozoic shortening, and near isothermal exhumation of the schists to form the Southern Alps.     

NEUTRON ACTIVATION ANALYSIS OF FIFTEEN GSJ IGNEOUS ROCK REFERENCE SAMPLES

Fifteen rock reference samples "Igneous rock series" issued by the Geological Survey of Japan were analysed for up to 31 elements by neutron activation analysis (NAA); 14 MeV-NAA for Si and Al, fission track method for U, radiochemical and instrumental NAA for rare-earth elements, and instrumental NAA for the remaining elements, with reactor neutrons for the latter three. The present results are compared with published values.     

Optical absorption and electron spin resonance in blue and green natural beryl

A comparative study of blue and green beryl crystals (from the region of Governador Valadares, Minas Gerais, Brazil) using electron paramagnetic resonance (EPR) and optical absorption (OA) spectroscopy is reported. The EPR spectra show that Fe³⁺ in blue beryl occupies a substitutional Al³⁺ site and in green beryl is localized in the structural channels between two O₆ planes. On the other hand the infrared spectra show that the alkali content in the blue beryl is mostly at substitutional and/or interstitial sites and in green beryl is mostly in the structural channels. The OA spectra show two types of Fe²⁺. Thermal treatments above 200° C in green beryl cause the reduction of Fe³⁺ into Fe²⁺ accompanied by a change of color to blue. The blue beryl color does not change on heating. The kinetics of the thermal conversion of Fe³⁺ into Fe²⁺ is composed of two first order processes; the first one has an activation energy ΔE ₁=0.30 eV and the second one has an activation energy ΔE ₂=0.46 eV.     

A comparison of channel-base currents and optical signals for rocket-triggered lightning strokes

A comparative analysis has been performed of the channel-base current and light waveforms for four rocket-triggered lightning strokes. It has been found that the current and light signals at the bottom of the channel exhibit a linear relationship (direct proportionality) in their rising portions. However, just after the peaks the linearity disappears, and the light signals usually decrease faster than the currents during the next several microseconds. Later, this trend is reversed and in some cases the light signals show another rising trend, even when the currents continue to decrease. The linear light/current relationship for the rising portions of the waveforms appears to be the same for different strokes. The findings support the idea of evaluating the variation of return stroke current along the lightning return stroke channel using light signals, provided that evaluation is limited to the rising portions of those signals and assuming that the light/current relationship observed at the bottom of the channel holds at other heights.     

Analysis of Physical and Chemical Parameters for Discrimination of Water Origin in a Hydroelectric Reservoir

Seventeen physical and chemical parameters were obtained from a hydroelectric reservoir located in a tropical region in the south of Brazil. Multivariate Principal Component Analysis (PCA) and Hierarchical Group Analysis (HGA) were used to identify the parameters discriminating the origin of water from the Tibagi and the Primeiro de Maio River, after it has passed the mixing region. The study was conducted during the dry and rainy seasons in July 2002 and February 2003 at three depths and three sampling sites located 0, 5, and 10 km away from the mixing region. The statistical methods showed to be appropriate for identifying the contribution of each tributary in the water mixing site of a complex water system. The most important discriminating parameter was the absorbance relation A(253 nm)/A(203 nm), followed by the concentrations of Fe(III), Mn(III), and Ni(II). An anthropogenic interference was found in the reservoir due to high Ni(II) and orthophosphate concentrations caused by a nearby town sewage discharge. The interference was more important during the dry periods due to the lower dispersion of the pollutants. Urgent initiatives should be taken from the state government to build treatment stations for the wastewater of the small cities around the Capivara hydroelectric reservoir to prevent the drinking water quality from deteriorating.     

Fog and rain water chemistry at Mt. Fuji: A case study during the September 2002 campaign

Measurements of fog and rain water chemistry at the summit of Mt. Fuji, the highest peak in Japan, as well as at Tarobo, the ESE slope of Mt. Fuji in September 2002. The pH of fog and rain water sampled at Mt. Fuji varied over a range of 4.0–6.8. Acidic fogs (pH < 5.0) were observed at the summit when the air mass came from the industrial regions on the Asian continent. The ratio of [SO₄²⁻]/[NO₃⁻] in the fog water was lower at Tarobo than at the summit. High concentrations of Na⁺ and Cl⁻ were determined in the rain water sampled at the summit, possibly because of the long-range transport of sea-salt particles raised by a typhoon through the middle troposphere. The vertical transport of sea-salt particles would influence the cloud microphysical properties in the middle troposphere. Significant loss of Mg²⁺ was seen in the rain water at the summit. The concentrations of peroxides in the fog and rain water were relatively large (10–105 μM). The potential capacity for SO₂ oxidation seems to be strong from summer to early autumn at Mt. Fuji. The fog water peroxide concentrations displayed diurnal variability. The peroxide concentrations in the nighttime were significantly higher than those in the daytime.     

Performance of a lithium fluoride bolometer for Tokyo dark matter search experiment

The performance of a 21-g lithium fluoride bolometer is presented. The background spectrum was measured in the surface laboratory. We derive an exclusion plot for the spin-dependent coupled Weakly Interacting Massive Particles (WIMPs) cross section.     

“Extreme boiling” model for variable salinity of the Hokko low-sulfidation epithermal Au prospect, southwestern Hokkaido, Japan

The Hokko prospect is located in the Minamikayabe area southwestern Hokkaido, Japan, where gold-bearing quartz veins of Pliocene age are exposed at the surface. The alteration mineral assemblage is typical of low-sulfidation epithermal systems, with the quartz veins associated with adularia alteration overprinted on Late Miocene propylitic alteration. Fluid inclusion studies of the vein quartz reveal mean homogenization temperatures of approximately 220 °C, and the co-existence of low-salinity (<2 wt.% NaCl equivalent) and moderate salinity (2 to 12 wt.% NaCl equivalent) fluid inclusions within the same veins. The moderate salinity fluid inclusions (2–12 wt.% NaCl equivalent) typically have relatively low homogenization temperatures between 150° to 200 °C. The results obtained from stable isotope analysis of  δ¹⁸O in quartz vein material showed a gradual decrease in  δ¹⁸O signatures with increasing depth. The majority of the samples have calculated fluid source signatures (δ¹⁸O_H2O) between −8.0 and −10.0‰, but there is a significant change in the composition above 185 m drill depth. The shallower samples in particular show a wide range of oxygen isotope signatures that are associated with the moderate salinity fluid inclusions. We interpret that low-salinity inclusions within the Hokko system represent the composition of the liquid phase of the fluid, before boiling, and that the moderate-salinity inclusions are representative of the residual liquid phase, after extensive non-adiabatic boiling and vapor loss in an open system. This mechanism resulted in the entrapment of fluids with variable salinities at the same time, and in close proximity to each other. This is also reflected in the  δ¹⁸O_H2O values which become more variable and heavier where the moderate-salinity inclusions occur. Deposition of ore minerals within the Hokko vein system also occurred at this time as a result of boiling and gas loss. Received: 30 May 1997 / Accepted: 6 January 1998