Laboratory simulation of geogas microbubble flow

Preliminary laboratory tests provided first data on the behavior of gas microbubbles through porous media in the framework of the geogas theory. Under experimented conditions with laboratory equipment arranged for pressure controlled gas-tracer injection and sampling, gas microbubbles moved up to ten times faster than singlephase flow in dry media under the same injection pressure. Microbubbles were determined to be very sensitive to changes in injection pressure and their terminal velocity seems to be described with good approximation by the Stokes formula. The capability of microbubbles to pick up and transport upward for short distances solid ultra-small particles (metallic and radionuclide compounds) has been proved. Results are consistent with a time-dependent process linked to the transport properties of microbubbles (e.g., flotation), such as that reported by some authors.     

Group Time Delay in the Reflection of P-Polarized Electromagnetic Plane Waves at a Stratigraphic Interface

The group time delay (GTD) formulae of quasi-total reflection of inhomogeneous P-polarized electromagnetic waves (P-PEW, whose electric field parallels to the plane of incidence), caused by the Goos–Hänchen effect, is derived by the phase shift of the wave. A numerical example where the frequency equals to 1 GHz is given. The curves of calculating results show that there are three discontinuous points at the critical angle of phase shift vector, the critical angle of attenuation vector and 90^○. When the angle of incidence is equal to one of these three angles, the GTD will become infinite, and the electromagnetic wave will propagate along the interface. The GTD will be very large, when the angle of incidence is close to one of these three angles. The results indicate that there is an important relationship between the two critical angles and the conductivity and permittivity of the two strata, and that the GTD has an important relationship with the angle of incidence. These results can be used to determine the lithology of the strata and to delimit the interfaces of strata more effectively. It is suggested that this research may prove useful in electromagnetic logging analysis and, perhaps, in the design of logging instruments.     

Palaeoenvironment of mid- to late Holocene loess deposit of the southern margin of the Tarim Basin,NW China

Holocene environmental history in the Tarim Basin and the Taklimakan Desert is known mainly from isolated eolian and lacustrine deposits and remain puzzling. Here we present an adequately preserved loess section, covering the past 5000 years, at a highland (2,850 m a.s.l) on the northern slope of Kunlun Mountains. Pollen preserved in the section reveal a drying trend with significant moisture fluctuations around 3000–2600 cal yr BP and 1800 cal yr BP at the study site. Comparing the pollen, grain size from the same section provides a different scene occurred in the Tarim basin and the Taklimakan desert. Comparison of grain size to A/C ration of pollen suggests that active sand southward shifting in south margin of the desert is coincident with increasing moisture condition at the section locality, implying a casual link. This moisture pattern occurred at the upper and lower elevation of the slope is best explained by the vertical variation of local precipitation along the slope.     

New palaeomagnetic data from Central Iran and a Triassic palaeoreconstruction

New pole positions for Triassic and Cretaceous times have been obtained from volcanic and sedimentary sequences in Central Iran. These new results confirm the general trend of the Apparent Polar Wander Path (APWP) of the Central-East-Iran microplate (CEIM) from the Triassic through the Tertiary as published by Soffel and Förster (1983, 1984). Two new palaeopoles for the Triassic of the CEIM have been obtained; limestones and tuffs from the Nakhlak region yield a mean direction of 094.0°/25.0°, N=12, k=4.1,α ₉₅=24.7°, after bedding correction, corresponding to a palaeopole position of 310.8°E; 3.9°S, and volcanic rocks from the Sirjan regions yield a mean direction of 114.5°/35.1°, N=44, k=45.9,α ₉₅=3.2° after bedding correction and a palaeopole position of 295.8°E; 10.3°N. Combining these with the two previously published results yields a new palaeopole position of 317.5°E; 12.7°N, for the Triassic of the CEIM, thus confirming that large counterclockwise rotations of the CEIM have occurred since the Triassic time. New results have also been obtained from Cretaceous limestones from the Saghand region of the CEIM. The mean direction of 340.7°/26.3°, N=33, k=44.3,α ₉₅=3.8°, and the corresponding palaeopole position of 283.1°E; 64.4°N, is in agreement with previously determined Cretaceous palaeopole positions of the CEIM. Furthermore, results have also been obtained from Triassic dolomite, limestone, sandstone and siltstone from the Natanz region, which is located to the west of the CEIM. A total of 161 specimens from 44 cores taken at five sites gave a mean direction of the five sites at 033.3°/25.1°, N=5, k=69.0,α ₉₅=9.3° and a palaeopole position of 167.2°E; 53.7°N. They pass the positive fold test of McElhinny (1964) on the level of 99% confidence. This pole position is in fairly good agreement with the mean Triassic pole position of the Turan Plate (149°E; 49°N). It indicates that the area of Natanz has not undergone the large counterclockwise rotation relative to the Turan plate since the Triassic, which has been shown for the CEIM. A Triassic palaeogeographic reconstruction of Iran, Arabia (Gondwana) and the Turan Plate (Eurasia) is also presented.     

Comparison of Two Methods Used to Model Shape Parameters of Pareto Distributions

Two methods are compared for estimating the shape parameters of Pareto field-size (or pool-size) distributions for petroleum resource assessment. Both methods assume mature exploration in which most of the larger fields have been discovered. Both methods use the sizes of larger discovered fields to estimate the numbers and sizes of smaller fields: (1) the tail-truncated method uses a plot of field size versus size rank, and (2) the log–geometric method uses data binned in field-size classes and the ratios of adjacent bin counts. Simulation experiments were conducted using discovered oil and gas pool-size distributions from four petroleum systems in Alberta, Canada and using Pareto distributions generated by Monte Carlo simulation. The estimates of the shape parameters of the Pareto distributions, calculated by both the tail-truncated and log–geometric methods, generally stabilize where discovered pool numbers are greater than 100. However, with fewer than 100 discoveries, these estimates can vary greatly with each new discovery. The estimated shape parameters of the tail-truncated method are more stable and larger than those of the log–geometric method where the number of discovered pools is more than 100. Both methods, however, tend to underestimate the shape parameter. Monte Carlo simulation was also used to create sequences of discovered pool sizes by sampling from a Pareto distribution with a discovery process model using a defined exploration efficiency (in order to show how biased the sampling was in favor of larger fields being discovered first). A higher (more biased) exploration efficiency gives better estimates of the Pareto shape parameters.     

Solubility of Pt and Pd sulfides and Au metal in aqueous bisulfide solutions

An experimental study of the solubility of Pt and Pd sulfides and Au metal in aqueous bisulfide solutions was conducted at temperatures from 200° to 350 °C and at saturated vapor pressure. A 500-mL Bridgemantype pressure vessel constructed of titanium, and equipped with a motor-driven magnetic stirrer was employed. The pH and the oxidation state were buffered by the coexistence of H₂S/HS^–/SO _inf4 ^sup2– . The pH at temperature was calculated to be in the range 5.91–9.43, and S was 0.3–2.2 m. Under the experimental conditions, the measured solubility of gold is about two to three orders of magnitude greater than that of either platinum and palladium, and the measured solubility of platinum is, in general, approximately equal to that of palladium, in molal units. The solubilities are found to be in the range: platinum 4–800 ppb, palladium 1–400 ppb, and gold 2–300 ppm. The solubility data can be modeled adequately using the following reactions: Au+H₂S+HH^–=Au(HS) ₂ ^– +1/2H₂ (K₁₄); PtS+HS^–+H⁺=Pt (HS) ₂ ⁰ (K₁₅); PdS+HS^–+H⁺=Pd (HS) ₂ ⁰ (K₁₆); PtS₂+H₂=Pt (HS) ₂ ⁰ (K₂₁).With equilibrium constants determined as follows (errors represent two standard deviations): Preliminary measurements of the solubilities of metallic Pt, Pd and Au as hydroxide complexes were also conducted using a second titanium pressure vessel, at temperatures of 200° to 350 °C and vapor saturation pressure, with pH and the oxidation state controlled or buffered by adding known amounts of NaOH and H₂ gas. The concentration of NaOH was in the range 0.01–1.3 m, and the partial pressure of H₂ at 200 °C was 62–275 bars, initially. Under the temperature and pressure conditions of these experiments, the solubility of platinum in 1 m NaOH solution is less than 100 ppb, that of palladium is less than 10 ppb and that of gold is less than 0.2 ppm; and in 0.01 m NaOH solutions, both Pt and Pd solubilities are less than 1 ppb. These data indicate that the contributions of hydroxide complexes to the total solubilities in the bisulfide runs, where the pH was in the range of 5.9–9.4, are negligible. The concentrations of both Pt and Pd as bisulfide complexes in the Salton Sea geothermal system predicted using the stability constants determined in this work agree very well with those values measured by McKibben et al. (1990). This calculation strongly suggests that the PGE are transported in moderately reducing, near neutral hydrothermal fluids as bisulfide complexes, as is gold. However, the much lower maximum solubility of the PGE relative to gold severely constrains models of re genesis, and may explain the relative rarity of hydrothermal PGE deposits compared to the relative abundance of hydrothermal Au deposits.     

Quantitative Assessment of Impacts of Regional Climate and Human Activities on Saline-alkali Land Changes： A Case Study of Qian＇an County, Jilin Province

Interdecadal and interannual variations of saline-alkali land area in Qian’an County, Jilin Province, China were comprehensively analyzed in this paper by means of satellite remote sensing interpretation, field flux observations and regional climate diagnosis. The results show that on the interannual scale, the impact of climate factors accounts for 71.6% of the total variation of the saline-alkali land area, and that of human activities accounts for 28.4%. Therefore the impact of climate factors is obviously greater than that of human activities. On the interdecadal scale, the impact of climate factors on the increase of the saline-alkali land area accounts for 43.2%, and that of human activities accounts for 56.8%. The impact of human activities on the variation of saline-alkali land area is very clear on the interdecadal scale, and the negative impact of human activities on the environment should not be negligible. Besides, changes in the area of heavy saline-alkali land have some indication for development of saline-alkali land in Qian’an County.