Ophiolite remnants at the eastern margin of the Bohemian Massif and their bearing on the tectonic evolution

Summary Amphibolites are widespread in the eastern part of the Bohemian Massif, east of the South Bohemian Pluton. Based on their geological situation, their metamorphic evolution and their geochemistry, they were separated into three genetically different units: the Rehberg ophiolite, the Buschandlwand amphibolite and the Raabs group. The metamorphic Rehberg ophiolite consists of a ultramafic to mafic plutonic sequence overlain by a gabbro/dike complex and a volcanic section with basaltic, andesitic and rhyolitic volcanics associated with pelitic to psammitic sediments. The entire ophiolite underwent amphibolite facies metamorphism. Rock/MORB normalisation plots and other element ratio plots, such as Ti vs. V or Ta/Yb vs. Th/Yb argue for a supra-subduction zone environment as site of the origin of the Rehberg ophiolite. The Letovice ophiolite in Moravia is structured in a similar way. Geochemically it shows a more MORB like composition but also a distinct tholeiitic island arc group. Although there is no age data for the protolith of both ophiolites, it is believed that they have formed in an oceanic basin separating the Brunovistulian-Moravian block to the east and the Moldanubian block to the west. Possible traces of the continuation of the ophiolites towards the north can be found in the Stare Mesto ophiolites and the ophiolites surrounding the Sowie Gory block in the Sudetes.

---

Ophiolitrelikte am ostrand der Böhmischen Masse und ihre bedeutung für die tektonische entwicklung

Zusammenfassung Amphibolite sind in der Böhmischen Masse, östlich des Südböhmischen Plutons weit verbreitet. Ausgehend von ihrer geologischen Position, ihrer metamorphen Entwick lung und ihrer Geochemie lassen sie sich in drei genetisch unterschiedliche Einheiten teilen: den Rehberg Ophiolith, den Buschandlwand Amphibolit und die Raabser Gruppe. Der metamorphe Rehberg Ophiolith besteht aus einer ultramatischen bis mafischen plutonischen Abfolge, die von einem Gabbro/Gangkomplex überlagert wird und einer vulkanischen Folge mit Basalten, Andesiten and Rhyoliten, die mit tonigen und sandigen Sedimenten verknüpft sind. Der gesamte Ophiolithkörper wurde unter amphibolitfaziellen Bedingungen metamorph überprägt. Rock/MORB Diagramme und andere Elementdarstellungen, wie z.B. das Ti vs. V, oder das Ta/Yb vs. Th/Yb Diagramm sprechen für eine Entstehung des Rehberg Ophioliths in einer Suprasubduction Zone. Der Letovice Ophiolith in Mähren weist eine ähnliche Struktur auf. Geochemisch zeigt er stärkere Ähnlichkeiten mit MORB, enthält aber auch Elemente von tholeiitischen Inselbogenbasalten. Auch wenn es für beide Ophiolithe noch keine Protolith-Altersdaten gibt, scheint es dennoch wahrscheinlich, daß sie in einem Ozeanbecken, das den Brunovistulisch-Moravischen Kontinentalblock im Osten vom Moldanubischen Kontinent im Westen trennt, gebildet wurden. Die mögliche Fortsetzung beider Ophiolithe könnten im Norden der Stare Mesto Ophiolith und die Ophiolithe rund um den Sowie Gory Block in den Sudeten darstellen.

---

---

With 7 Figures     

Geochemical exploration for platinum-group elements in the Bushveld Complex, South Africa

Analyses of stream sediment and soil samples from the Bushveld Complex, South Africa have revealed enhanced precious metal concentrations, which can be related both to mining activities and the presence of hidden concentrations of platinum-group elements (PGEs) and gold. The economically important PGE deposits hosted by the Upper Critical Zone of the Rustenburg Layered Suite are revealed by a high PGE and Au content in the overlying soils. A second zone of elevated precious metal concentrations straddles the boundary between the Main and Upper Zones and has to date been traced for more than 100 km. This zone follows the igneous layering of the Rustenburg Layered Suite and is offset by the Brits Graben. It is therefore thought to be the reflection of a magmatic PGE-Au mineralisation. Received: 31 May 1996 / Accepted: 7 January 1997     

Isotope composition of Medieval lead glasses reflecting early silver production in Central Europe

The lead isotope composition of 32 lead glasses excavated from strata of the twelfth to early fifteenth century in six countries of NW Europe made the predominance of the Harz Mountains in this period of the Medieval European lead and silver production highly probable. Post-Variscan vein type galena, Devonian syngenetic hydrothermal ore (Rammelsberg) and blended ore from both deposits in the Harz were used. Our evaluation of 200 mining sites in Germany, Britain and Ireland also demonstrated that minor lead sources for lead glass were located in Bavaria/Bohemia and England. Lead ores from the Rhenohercynian orogenic belt in Germany are derived from rock sources close to the upper continental crust composition in ²³⁸U/²⁰⁴Pb of about 10 and Th/U of about 4. The ores in Central England originated from rocks with ²³⁸U/²⁰⁴Pb of about 11. Received: 24 September 1996 / Accepted: 17 January 1997     

Prediction of volumes and risk in hydrocarbon exploration: a quantification of geology

 The prediction of the hydrocarbon potential of a specific trap or of a number of specific traps (venture), referred to herein as prospect appraisal, concerns a probabilistic exercise based on the quantification of geology in terms of structural closure, reservoir quality, hydrocarbon charge, and the retention potential of the seal. Its objectives include: (a) prediction of the hydrocarbon volumes that could be present in the trap from an analysis of its geologic attributes; (b) the amount of uncertainty introduced in the volumetric prediction by the uncertainties in the subsurface geology; (c) the risk that one or more of the essential attributes of the prospect are underdeveloped and recoverable reserves are absent. The uncertainty of the geologic input requires a probabilistic approach, for which the Monte Carlo procedure is well suited. Prospect appraisal forms the basis for decision-making in oil exploration and development and, therefore, should be reliable, consistent, and auditable. This requires the use of a consistent methodology, the development of reliable models to quantify the geologic processes involved, and the collection of comprehensive and relational databases for the many geologic variables. As a result of data availability, uncertainty and risk tend to increase strongly from mature, producing basins to areas of frontier exploration. This may complicate management of exploration portfolios. Received: 1 July 1996/Accepted: 25 November 1996     

Seismic Ground Motion Expected for the Eastern District of Naples

The seismic ground motion of a test area in the eastern district of Naples is computed with a hybrid technique based on the mode summation and the finite difference methods. This technique allows us the realistic modelling of source and propagation effects, including local soil conditions. In the modelling, we consider the 1980 Irpinia earthquake, a good example of strong shaking for the area of Naples, which is located about 90 km from the epicenter.The detailed geological setting is reconstructed from a large number of drillings. The sub-soil is mainly formed by alluvial (ash, stratified sand and peat) and pyroclastic materials overlying a pyroclastic rock (yellow neapolitan tuff), representing the neapolitan bedrock. The detailed information available on mechanical properties of the sub-soil and its geometry warrants the application of the sophisticated hybrid technique.As expected, the sedimentary cover causes an increase of the signal's amplitudes and duration. If thin peat layers are present, the amplification effects are reduced, and the peak ground accelerations are similar to those observed for the bedrock model. This can be explained by the backscattering of wave energy at such layers, that tend to seismically decouple the upper from the lower part of the structure.For SH-waves, the influence of the variations of the S-wave velocities on the spectral amplification is studied, by considering locally measured velocities and values determined from near-by down-hole measurements. The comparison between the computed spectral amplifications confirms the key role of an accurate determination of the seismic velocities of the different layers.The comparison performed between a realistic 2-D seismic response and a standard 1-D response, based on the vertical propagation of waves in a plane layered structure, shows considerable difference, from which it is evident that serious caution must be taken in the modelling of expected ground motion at a specific site.     

Accretion and exhumation at a Variscan active margin, recorded in the Saxothuringian flysch

The Saxothuringian flysch basin, on the north flank of the Central European Variscides, was fed and eventually overthrust by the northwestern, active margin of the Tepla-Barrandian terrane. Clast spectra, mineral composition and isotopic ages of detrital mica and zircon have been analyzed in order to constrain accretion and exhumation of rocks in the orogenic wedge. The earliest clastic sediments preserved are of early Famennian age (ca. 370?Ma). They are exposed immediately to the NW of the suture, and belong to the par-autochthon of the foreland. Besides ultramafic (?ophiolite) material, these rocks contain clasts derived from Early Paleozoic continental slope sediments, originally deposited at the NW margin of the Saxothuringian basin. These findings, together with the paleogeographic position of the Famennian clastics debris on the northwestern passive margin, indicate that the Saxothuringian narrow ocean had been closed by that time. Microprobe analyses of detrital hornblendes suggest derivation from the “Randamphibolit” unit, now present in the middle part of the Saxothuringian allochthon (Münchberg nappes). Detrital zircons of metamorphic rocks formed a little earlier (ca. 380?Ma) indicate rapid recycling at the tectonic front. The middle part of the flysch sequence (ca. early to middle Viséan), both in the par-autochthon and in the allochthon, contains abundant clasts of Paleozoic rocks derived from the northwestern slope and rise, together with debris of Cadomian basement, 500-Ma granitoids and 380?Ma (early Variscan) crystalline rocks. All of these source rocks were still available in the youngest part of the flysch (c. middle to late Viséan), but some clasts record, in addition, accretion of the northwestern shelf. Our findings permit deduction of minimum rates of tectonic shortening well in excess of 10–30?mm per year, and rates of exhumation of ca. 3?mm/a, and possibly more.     

Argillite debris converted to bauxite during karst weathering: evidence from immobile element geochemistry at the Olmedo Deposit, Sardinia

The Olmedo bauxite deposit occurs in the Nurra district of northwest Sardinia. It forms a stratiform horizon in Cretaceous limestone and marl. Uplift in mid-Cretaceous had exposed recently deposited limestone to karst weathering, and a layer of argillaceous debris accumulated on its surface and was partly converted to bauxite. Intermediate products were desiccated marl, bauxitic argillite and argillaceous bauxite. Subsidence followed, and the bauxite was preserved by the deposition of late Cretaceous limestone and other sediments. Uplift in Oligocene-Miocene time, with ensuing erosion, exposed the bauxite horizon to its present configuration. Concentrations of normative minerals illustrate chemical processes and the build-up of Al in the bauxite horizon. Plots of chemical data and correlation coefficients show that Al, Ti, Zr, Nb, Th, Cr and V were immobile during the bauxitization process. Mass changes point to large net removal of Si, Mg and K from the system, although some of this material and slightly mobile Al were reprecipitated in the underlying argillite and altered marl. Immobile element ratios trace the source of the bauxite to the underlying argillaceous limestone. Al in the bauxite was accumulated from the degradation of 25 to 50 m of the argillaceous limestone. Received: 10 June 1996 / Accepted: 15 April 1997     

Optimal weighting in the finite difference solution of the convection-dispersion equation

Oscillation and numerical dispersion limit the reliability of numerical solutions of the convection-dispersion equation when finite difference methods are used. To eliminate oscillation and reduce the numerical dispersion, an optimal upstream weighting with finite differences is proposed. The optimal values of upstream weighting coefficients numerically obtained are a function of the mesh Peclet number used. The accuracy of the proposed numerical method is tested against two classical problems for which analytical solutions exist. The comparison of the numerical results obtained with different numerical schemes and those obtained by the analytical solutions demonstrates the possibility of a real gain in precision using the proposed optimal weighting method. This gain in precision is verified by interpreting a tracer experiment performed in a laboratory column.