Intraurban variability of PM10 and PM2.5 in an Eastern Mediterranean city

The results of the first large scale chemical characterization of PM10 and PM2.5 at three different sites in the urban city of Beirut, Lebanon, are presented. Between May 2009 and April 2010 a total of 304 PM10 and PM2.5 samples were collected by sampling every sixth day at three different sites in Beirut. Observed mass concentrations varied between 19.7 and 521.2 μg m^? 3 for PM10 and between 8.4 and 72.2 μg m^? 3 for PM2.5, respectively. Inorganic concentrations accounted for 29.7–35.6 μg m^? 3 and 46.0–53.5 μg m^? 3 of the total mass of PM10 and PM2.5, respectively. Intra-city temporal and spatial variations were assessed based on the study of three factors: correlation coefficients (R) for PM and chemical components, coefficient of divergence (CODs), and source apportionment using positive matrix factorization (PMF). Based on R and COD of PM concentrations, the three sites appear homogeneous. However, when individual elements were compared, heterogeneity among sites was found. This latter was attributed to the variability in the percent contribution of biogenic and local anthropogenic source factors such as traffic related sources and dust resuspension. Other factors included the proximity to the Mediterranean sea, the population density and the topographical structure of the city. Hence, despite its small size (20.8 km²), one PM monitoring site does not reflect an accurate PM level in Beirut.     

Effect of salt solution on the optimum lime contents of bentonite and silt

Acta Geotechnica - In practice, prior to treating a soil with lime, the optimum lime content required for the cation exchange and for providing sufficient Ca2+ and high pH for pozzolanic reaction...     

Short-Term Response of a Downstream Marine System to the Partial Opening of a Tidal-River Causeway

The spillway gates of the Petitcodiac Causeway, a hydraulic structure ~35 km upstream of the mouth of the Petitcodiac River in New Brunswick, Canada, were permanently opened in April 2010. The short-term effect opening the spillway gates had on downstream intertidal mudflats of the upper Bay of Fundy was investigated. Specifically, a multivariate before-after-control-impact design was used to determine if opening the spillway gates affected the invertebrate community (crustaceans, polychaetes, and molluscs), abiotic sediment conditions (sediment water content, mean particle size, penetrability, and depth of the apparent redox potential discontinuity), or resource availability (sediment chlorophyll a concentration and organic matter content) of five intertidal mudflats (two impacted sites, three reference sites) spanning Chignecto Bay, the northern arm of the upper Bay of Fundy, up to 5 months post-opening. No biologically or statistically meaningful differences were detected between impacted and reference sites for any of the measured variables. This suggests that opening the causeway did not have a quantifiable impact on these intertidal mudflats, at least within half a year of the opening. This is likely a result of the macrotidal nature of the Bay of Fundy that overwhelmed any immediate changes to hydrodynamics that occurred after the opening of the causeway gates.     

The influence of geological, geochemical, and biogenic habitat heterogeneity on seep biodiversity

Cold seeps are among the most heterogeneous of all continental margin habitats. Abiotic sources of heterogeneity in these systems include local variability in fluid flow, geochemistry, and substrate type, which give rise to different sets of microbial communities, microbial symbiont-bearing foundation species, and associated heterotrophic species. Biogenic habitats created by microbial mats and the symbiotic species including vesicomyid clams, bathymodiolin mussels, and siboglinid tubeworms add an additional layer of complexity to seep habitats. These forms of habitat heterogeneity result in a variety of macrofaunal and meiofaunal communities that respond to changes in structural complexity, habitat geochemistry, nutrient sources, and interspecific interactions in different ways and at different scales. These responses are predicted by a set of theoretical metacommunity models, the most appropriate of which for seep systems appears to be the 'species sorting' concept, an extension of niche theory. This concept is demonstrated through predictable patterns of community assembly, succession, and beta-level diversity. These processes are described using a newly developed analytical technique examining the change in the slope of the species accumulation curve with the number of habitats examined. The diversity response to heterogeneity has a consistent form, but quantitatively changes at different seep sites around the world as the types of habitats present and the size-classes of fauna analyzed change. The increase in beta diversity across seep habitat types demonstrates that cold seeps and associated biogenic habitats are significant sources of heterogeneity on continental margins globally.     

The effects of brine disposal on a subtidal meiofauna community

Desalination plants generate notable (>1,000 s m³) quantities of hypersaline brine which potentially affect the biological communities in the receiving area. We assessed whether proximity to a brine discharge point located off Gran Canaria (Canary Islands, eastern Atlantic) altered patterns in the abundance and assemblage structure of subtidal, soft-bottom, meiofauna. Samples were collected twice (May 2008 and January 2009) at 0, 15 and 30 m away from the brine discharge point, corresponding to a change in salinity from 45 to 36. Proximity to the brine discharge point affected overall meiofaunal abundances: lowest abundances were observed at 0 m (64.55 ± 39.86 ind 10 cm⁻², mean ± SD) than at 15 (210.49 ± 121.01 ind 10 cm⁻²) and 30 m (361.88 ± 102.64 ind 10 cm⁻²) away from the brine discharge point. This pattern was particularly notable for the most conspicuous meiofaunal groups: nematodes and copepods, and meiofaunal assemblage structure also differed with varying proximity to the brine discharge point. Although multivariate techniques identified changes in salinity as a relevant driver of patterns in meiofaunal assemblage structure with varying proximity to the brine outfall, a shift in particle size composition between May 2008 and January 2009 also contributed to explain differences in meiofaunal abundances and assemblage structure with varying proximity to the brine discharge point. Hence, meiofauna can be considered a suitable tool to monitor environmental impacts derived from the discharge of hypersaline effluents on subtidal, soft-bottom, assemblages if potential confounding drivers, i.e. here temporal changes in particle size composition, are accounted for to avoid possible confusing interpretations.     

Distribution and morphology of mud volcanoes and other fluid flow-related lake-bed structures in Lake Baikal, Russia

New high-resolution multibeam bathymetry data recorded in 2009 in the deepest lake in the World, Lake Baikal, Siberia, enabled a better understanding of the morphology of ten known lake-bed structures—the Bolshoy, Malenki, Malyutka and Stari mud volcanoes in the South Baikal Basin, the K1–4 structures in the Selenga delta, and the Novosibirsk and St. Petersburg structures in the Central Baikal Basin—and also the discovery of 29 new lake-bed structures. These new structures are the S1, Tolstiy, mTSG and S2 in the South Baikal Basin, the P1–P4, P6–P19 and K5–K8 in the Selenga delta accommodation zone, and the C1, C3 and C4 edifices in the Central Baikal Basin. In all, 39 positive relief structures were identified and their large-scale distribution mapped. Based on their typical shape, the observation of high-reflectivity areas on side-scan sonar data records, and evidence of feeder channels on subsurface data, these structures can be classified as mud volcanoes. This has already been confirmed in other publications for the Bolshoy, Malenki and K2 structures, by the recovery of mud breccias in sediment cores. Most structures occur on or near faults and have orientations parallel with the major faults and main stress orientations in the basins, suggesting a strong structural control on the formation of the mud volcanoes. Their slopes are generally steeper than 5°, consistent with interpretation as mud cones formed by high-viscosity, stiff mud plugs. Only few structures appear to be characterised by a crater, in which case this apparent crater seems to be formed by the coalescence of several single cones, leaving a depression in the centre. Some structures have a moat, which has probably an erosional origin. Furthermore, three depressions have been found, named P5, P20 and C2, which are suggested to be pockmarks.     

Evolution of sea‐surface conditions on the northwestern Greenland margin during the Holocene

Reconstructions of sea‐surface conditions during the Holocene were achieved on two sediment cores from the northwest Greenland margin (AMD14‐204) and Kane Basin (AMD14‐Kane2B) based on dinoflagellate cyst assemblages. On the northwest Greenland margin, sea‐surface conditions were cold with an extended sea ice cover prior to 7750 cal a bp associated with the end of the deglaciation. A major change occurred around ca. 7750 cal a bp with enhanced influence of warmer water from the West Greenland Current, and optimal sea‐surface conditions were observed around 6000 cal a bp . After 3350 cal a bp , results reflect the establishment of the modern assemblages. In the Kane Basin, sea‐surface conditions were not favourable for dinocyst productivity prior to 7880 cal a bp , as the basin was still largely covered by ice. The presence of warmer water is recorded between 7880 and 7200 cal a bp and the highest primary productivity between 5200 and 2100 cal a bp , but sea‐surface conditions remained cold with an extended sea ice cover throughout the Holocene. Overall, the results from this study revealed the strong influence of meltwater discharges and oceanic current variability on the sea‐surface conditions. Copyright © 2019 John Wiley & Sons, Ltd.     

Multisource multibeam backscatter data: developing a strategy for the production of benthic habitat maps using semi-automated seafloor classification methods

The establishment of multibeam echosounders (MBES) as a mainstream tool in ocean mapping has facilitated integrative approaches towards nautical charting, benthic habitat mapping, and seafloor geotechnical surveys. The bathymetric and backscatter information generated by MBES enables marine scientists to present highly accurate bathymetric data with a spatial resolution closely matching that of terrestrial mapping, and can generate customized thematic seafloor maps to meet multiple ocean management needs. However, when a variety of MBES systems are used, the creation of objective habitat maps can be hindered by the lack of backscatter calibration, due for example, to system-specific settings, yielding relative rather than absolute values. Here, we describe an approach using object-based image analysis to combine 4 non-overlapping and uncalibrated (backscatter) MBES coverages to form a seamless habitat map on St. Anns Bank (Atlantic Canada), a marine protected area hosting a diversity of benthic habitats. The benthoscape map was produced by analysing each coverage independently with supervised classification (k-nearest neighbor) of image-objects based on a common suite of 7 benthoscapes (determined with 4214 ground-truthing photographs at 61 stations, and characterized with backscatter, bathymetry, and bathymetric position index). Manual re-classification based on uncertainty in membership values to individual classes—especially at the boundaries between coverages—was used to build the final benthoscape map. Given the costs and scarcity of MBES surveys in offshore marine ecosystems—particularly in large ecosystems in need of adequate conservation strategies, such as in Canadian waters—developing approaches to synthesize multiple datasets to meet management needs is warranted.     

Seismic Microzonation: A Comparison between Geotechnical and Seismological Approaches in Pointe-à-Pitre (French West Indies)

Pointe-à-Pitre, the main city of Guadeloupe in the French West Indies, has on several occasions been partially destroyed by major historical earthquakes. Moreover, a post-seismic assessment of the damage from the 1985 Montserrat earthquake indicates that the town is prone to site effects. Consequently, from 1996 to 1998, BRGM conducted a seismic microzonation study based on geotechnical and geological data. At the same time, three seismological studies were being conducted – two based on earthquake recordings using a time-series analysis and the classical spectral ratio (CSR) method (CETE/LCPC and BRGM), and the third based on noise measurement at 400 points using the horizontal-to-vertical noise ratio (HVNR) method (CETE/LCPC). The objective of this paper is not to carry out a new microzonation study by taking into account all the results, but rather to show in what respects the results of these different methods are in agreement or not. A comparison of the results of the seismological studies with the geotechnical microzonation shows that they are in fairly good agreement, albeit with some discrepancies. The results indicate that the seismological methods and the geotechnical data are highly complementary and should be used together in compiling seismic transfer-function microzonation maps. This revised version was published online in July 2006 with corrections to the Cover Date.     

Mid-Holocene and Last Glacial Maximum climate simulations with the IPSL model—part I: comparing IPSL_CM5A to IPSL_CM4

The climates of the mid-Holocene (MH), 6,000 years ago, and of the Last Glacial Maximum (LGM), 21,000 years ago, have extensively been simulated, in particular in the framework of the Palaeoclimate Modelling Intercomparion Project. These periods are well documented by paleo-records, which can be used for evaluating model results for climates different from the present one. Here, we present new simulations of the MH and the LGM climates obtained with the IPSL_CM5A model and compare them to our previous results obtained with the IPSL_CM4 model. Compared to IPSL_CM4, IPSL_CM5A includes two new features: the interactive representation of the plant phenology and marine biogeochemistry. But one of the most important differences between these models is the latitudinal resolution and vertical domain of their atmospheric component, which have been improved in IPSL_CM5A and results in a better representation of the mid-latitude jet-streams. The Asian monsoon’s representation is also substantially improved. The global average mean annual temperature simulated for the pre-industrial (PI) period is colder in IPSL_CM5A than in IPSL_CM4 but their climate sensitivity to a CO₂ doubling is similar. Here we show that these differences in the simulated PI climate have an impact on the simulated MH and LGM climatic anomalies. The larger cooling response to LGM boundary conditions in IPSL_CM5A appears to be mainly due to differences between the PMIP3 and PMIP2 boundary conditions, as shown by a short wave radiative forcing/feedback analysis based on a simplified perturbation method. It is found that the sensitivity computed from the LGM climate is lower than that computed from 2 × CO₂ simulations, confirming previous studies based on different models. For the MH, the Asian monsoon, stronger in the IPSL_CM5A PI simulation, is also more sensitive to the insolation changes. The African monsoon is also further amplified in IPSL_CM5A due to the impact of the interactive phenology. Finally the changes in variability for both models and for MH and LGM are presented taking the example of the El-Niño Southern Oscillation (ENSO), which is very different in the PI simulations. ENSO variability is damped in both model versions at the MH, whereas inconsistent responses are found between the two versions for the LGM. Part 2 of this paper examines whether these differences between IPSL_CM4 and IPSL_CM5A can be distinguished when comparing those results to palaeo-climatic reconstructions and investigates new approaches for model-data comparisons made possible by the inclusion of new components in IPSL_CM5A.