Relating food and human hair to assess mercury exposure levels in Poboya,Central Sulawesi,Indonesia

Poboya is a major small-scale gold-mining area in Central Sulawesi, Indonesia, that has been operating since 2009. About 200–500 kg of mercury is released each day as a result of gold-mining activities over a total area of 7000 ha. We examined mercury contamination by using two types of sample, namely food and human hair. Samples were obtained in Poboya and in the city of Palu, 11 km away. Samples of 22 foods were obtained from traditional markets in Poboya and Palu. Total mercury concentrations ranged from 0.003 to 0.31 µg/g in foods from Poboya and from 0.001 to 0.13 µg/g in those from Palu. The highest total mercury concentration in Poboya was found in unripe banana, which is frequently consumed by the local people. In Poboya, the weekly mercury intakes from foods were calculated at 180.3 µg/person from vegetables, 1.7 µg/person from processed foods, 51.4 µg/person from seafood, and 17.2 µg/person from meat and eggs. In Palu, the weekly mercury intakes were 2.9 µg/person from vegetables, 3.1 µg/person from processed foods, 60.8 µg/person from seafood, and 19 µg/person from meat and eggs. These findings delineated Poboya as an area polluted by mercury contamination. Intake of mercury-contaminated food influenced the results obtained in human hair. Hair concentrations of total mercury in Poboya ranged from 0.3 to 19.6 µg/g.     

The international at-sea intercomparison of fCO2 systems during the R/V Meteor Cruise 36/1 in the North Atlantic Ocean

The ‘International Intercomparison Exercise of fCO₂ Systems’ was carried out in 1996 during the R/V Meteor Cruise 36/1 from Bermuda/UK to Gran Canaria/Spain. Nine groups from six countries (Australia, Denmark, France, Germany, Japan, USA) participated in this exercise, bringing together 15 participants with seven underway fugacity of carbon dioxide (fCO₂) systems, one discrete fCO₂ system, and two underway pH systems, as well as systems for discrete measurement of total alkalinity and total dissolved inorganic carbon. Here, we compare surface seawater fCO₂ measured synchronously by all participating instruments. A common infrastructure (seawater and calibration gas supply), different quality checks (performance of calibration procedures for CO₂, temperature measurements) and a common procedure for calculation of final fCO₂ were provided to reduce the largest possible amount of controllable sources of error. The results show that under such conditions underway measurements of the fCO₂ in surface seawater and overlying air can be made to a high degree of agreement (±1 μatm) with a variety of possible equilibrator and system designs. Also, discrete fCO₂ measurements can be made in good agreement (±3 μatm) with underway fCO₂ data sets. However, even well-designed systems, which are operated without any obvious sign of malfunction, can show significant differences of the order of 10 μatm. Based on our results, no “best choice” for the type of the equilibrator nor specifics on its dimensions and flow rates of seawater and air can be made in regard to the achievable accuracy of the fCO₂ system. Measurements of equilibrator temperature do not seem to be made with the required accuracy resulting in significant errors in fCO₂ results. Calculation of fCO₂ from high-quality total dissolved inorganic carbon (C_T) and total alkalinity (A_T) measurements does not yield results comparable in accuracy and precision to fCO₂ measurements.     

Predictability of storm wave heights in the ice-free Beaufort Sea

A predictability study on wave forecast of the Arctic Ocean is necessary to help identify hazardous areas and ensure sustainable shipping along the trans-Arctic routes. To assist with validation of the Arctic Ocean wave model, two drifting wave buoys were deployed off Point Barrow, Alaska for two months in September 2016. Both buoys measured significant wave heights exceeding 4 m during two different storm events on 19 September and 22 October. The NOAA-WAVEWATCH III^? model with 16-km resolution was forced using wind and sea ice reanalysis data and obtained general agreement with the observation. The September storm was reproduced well; however, model accuracy deteriorated in October with a negative wave height bias of around 1 m during the October storm. Utilising reanalysis data, including the most up-to-date ERA5, this study investigated the cause: grid resolution, wind and ice forcing, and in situ sea level pressure observations assimilated for reanalysis. The analysis has found that there is a 20% reduction of in situ SLP observations in the area of interest, presumably due to fewer ships and deployment options during the sea ice advance period. The 63-member atmospheric ensemble reanalysis, ALERA2, has shown that this led to a larger ensemble spread in the October monthly mean wind field compared to September. Since atmospheric physics is complex during sea ice advance, it is speculated that the elevated uncertainty of synoptic-scale wind caused the negative wave model bias. This has implications for wave hindcasts and forecasts in the Arctic Ocean.     

Optimum strength ratio of hysteretic damper

This paper deals with steel moment frames combined with hysteretic dampers. Specifically, it examines the strength of dampers required to minimize damage to moment frames under earthquake loading. The important structural variables are the ratio of the dampers' shear strength to the maximum resistance, termed β in this study, and the relative stiffness between the damper and the main frame, termed k. The equivalent viscous damping ratio of the entire structural system is affected by the quantities β and k and the ductility ratio of the main frame. The optimum dampers' strength ratio (β_opt), which maximizes the equivalent viscous damping ratio, was formulated as a function of k, and it was found that β_opt is independent of the ductility ratio of the main frame. Earthquake response analysis confirmed that damage to the main frame can be significantly reduced by hysteretic dampers and minimized at the value of β_opt. © 1998 John Wiley & Sons, Ltd.     

Resting cells of microorganisms in the 20–100 μm fraction of marine sediments in an Antarctic coastal area

We investigated the morphological features, vertical sinking fluxes, and number densities of the resting cells of ice-associated microorganisms in the 20–100 μm fraction of natural marine sediments collected from ice-covered and ice-free areas around Syowa Station, Lützow-Holm Bay, East Antarctica. We identified the resting cells of various taxonomic groups, including the spores of a diatom, cysts of three dinoflagellates, cysts of five oligotrich ciliates, and the eggs of a mesozooplankton. This is the first report of oligotrich ciliate cysts from Antarctic waters. The resting spores of Thalassiosira australis (diatom), cysts of Polarella glacialis (dinoflagellate), and egg type 1 sink to the bottom sediment during summer. Our results suggest that some planktonic and ice-associated microorganisms in Antarctic coastal areas send their resting cells to the bottom sediments as seed populations for the following generation.     

Mass Discharge in a Tracer Plume: Evaluation of the Theissen Polygon Method

A tracer plume was created within a thin aquifer by injection for 299 d of two adjacent “sub‐plumes” to represent one type of plume heterogeneity encountered in practice. The plume was monitored by snapshot sampling of transects of fully screened wells. The mass injection rate and total mass injected were known. Using all wells in each transect (0.77 m well spacing, 1.4 points/m² sampling density), the Theissen Polygon Method (TPM) yielded apparently accurate mass discharge (M_d) estimates at three transects for 12 snapshots. When applied to hypothetical sparser transects using subsets of the wells with average spacing and sampling density from 1.55 to 5.39 m and 0.70 to 0.20 points/m², respectively, the TPM accuracy depended on well spacing and location of the wells in the hypothesized transect with respect to the sub‐plumes. Potential error was relatively low when the well spacing was less than the widths of the sub‐plumes (>0.35 points/m²). Potential error increased for well spacing similar to or greater than the sub‐plume widths, or when less than 1% of the plume area was sampled. For low density sampling of laterally heterogeneous plumes, small changes in groundwater flow direction can lead to wide fluctuations in M_d estimates by the TPM. However, sampling conducted when flow is known or likely to be in a preferred direction can potentially allow more useful comparisons of M_d over multiyear time frames, such as required for performance evaluation of natural attenuation or engineered remediation systems.     

Surf zone fishes in an exposed sandy beach at Sanrimatsubara,Japan: Does fish assemblage structure differ among microhabitats?

To assess differences in fish assemblage structures among microhabitats within the surf zone of an exposed sandy beach, three microhabitats (onshore current, rip current, and river adjacent sites) were sampled at Sanrimatsubara Beach, western Japan, in May, August, and November 2002 and 2003. Although several physical variables (e.g. wave height, current speed, turbidity, salinity, and sand particle size) and major prey abundances (calanoid copepods and mysids) differed among the sites, no significant differences were apparent in the numbers of fish species and individuals among the sites in any month in either year. In addition, species and individual numbers of two dominant feeding groups (zooplankton feeders, and epiphytic and benthic crustacean feeders) did not show any significant responses to among-site differences in prey abundance. Cluster and ordination analysis confirmed the similarity in fish species composition among the three sites. These results indicated that the surf zone fish assemblage structures were similar among the microhabitats in spite of there being microhabitat-related differences in abiotic and biotic environments.     

Clay Minerals in an Active Hydrothermal Field at Iheya‐North‐Knoll,Okinawa Trough

Iheya‐North‐Knoll is one of the small knolls covered with thick sediments in the Okinawa Trough back‐arc basin. At the east slope of Iheya‐North‐Knoll, nine hydrothermal vents with sulfide mounds are present. The Integrated Ocean Drilling Program (IODP) Expedition 331 studied Iheya‐North‐Knoll in September 2010. The expedition provided us with the opportunity to study clay minerals in deep sediments in Iheya‐North‐Knoll. To reveal characteristics of clay minerals in the deep sediments, samples from the drilling cores at three sites close to the most active hydrothermal vent were analyzed by X‐ray diffraction, scanning electron microscope and transmission electron microscope. The sediments are classified into Layer 0 (shallow), Layer 1 (deep), Layer 2 (deeper) and Layer 3 (deepest) on the basis of the assemblage of clay minerals. Layer 0 contains no clay minerals. Layer 1 contains smectite, kaolinite and illite/smectite mixed‐layer mineral. Layer 2 contains chlorite, corrensite and chlorite/smectite mixed‐layer mineral. Layer 3 is grouped into three sub‐layers, 3A, 3B and 3C; Sub‐layer 3A contains chlorite and illite/smectite mixed‐layer mineral, sub‐layer 3B contains chlorite/smectite and illite/smectite mixed‐layer minerals, and sub‐layer 3C contains chlorite and illite. Large amounts of di‐octahedral clay minerals such as smectite, kaolinite, illite and illite/smectite mixed‐layer mineral are found in Iheya‐North‐Knoll, which is rarely observed in hydrothermal fields in mid‐ocean ridges. Tri‐octahedral clay minerals such as chlorite, corrensite and chlorite/smectite mixed‐layer mineral in Iheya‐North‐Knoll have low Fe/(Fe + Mg) ratios compared with those in mid‐ocean ridges. In conclusion, the characteristics of clay minerals in Iheya‐North‐Knoll differ from those in mid‐ocean ridges; di‐octahedral clay minerals and Fe‐poor tri‐octahedral clay minerals occur in Iheya‐North‐Knoll but not in mid‐ocean ridges.     

Indigenous knowledge on soil classification of ethnic groups in Luang Prabang province of the Lao PDR

Introduction Traditional agriculture based on indigenous knowledge (IK) has been practiced in many areas for centuries. Such practices are often the basis of very sustainable technologies, which are potentially suitable for developmental programs. Polthanee (2001) reported that such farmer practices have been repeatedly found to be valid, rational and usually suited to the local environmental conditions. Moreover, with increased under- standing of agro-ecosystems, professionals in agricultura…