Long-term thermo-mechanical behavior of energy pile in dry sand

A small-scale pile has been developed in the laboratory to investigate the thermo-mechanical behavior of energy piles subjected to a significant number of thermal cycles. The pile (20 mm external diameter), installed in dry sand, was initially loaded at its head to 0, 20, 40 and 60% of its ultimate bearing capacity (500 N). At the end of each loading step, 30 heating/cooling cycles were applied. The long-term behavior of the pile was observed in terms of head settlement, axial force profile, soil and pile temperature, and stress in soil. The results evidence the irreversible settlement of the pile head induced by thermal cycles under constant load head. In addition, the incremental irreversible settlement that accumulates after each thermal cycle decreases when the number of cycles increases. The evolution of irreversible pile head settlement versus number of cycles can be reasonably predicted by an asymptotic equation.     

Synoptic-scale physical mechanisms associated with the Mei-yu front: A numerical case study in 1999

The Mei-yu front system occurring from 23 to 27 June 1999 consists of the Mei-yu front and the dewpoint front, which confine a warm core extending from the eastern flank of the Tibetan Plateau to the west of 145°E. To further understand the synopticscale physical mechanisms associated with the Mei-yu front system, the present study proposes another insight into the physical significance of the x-component relative vorticity (XRV) whose vertical circulation is expected to tilt isentropic surfaces. The XRV equation diagnoses exhibit that the twisting effect of the planetary vorticity (TEPV) is positive along the Mei-yu front and negative in the dewpoint front region, and tilts isentropic surfaces from south to north in the Mei-yu frontal zone. Conversely, the meridional gradient of the atmospheric buoyancy (MGAB) tilts isentropic surfaces in the opposite direction and maintains negative in the regions where the TEPV is positive and vice versa. Thus, the TEPV plays the role of the Mei-yu frontogenesis, whereas the MGAB demonstrates the Meiyu frontolysis factor. Both terms control the evolution of the cross-front circulation. The other terms show much minor contributions in this case study. The present simulations also indicate that the weakening of the upper-level jet evidently induces the weakening of the Mei-yu front and reduces the amplitude of the East Asia cold trough. Furthermore, the impact can also penetrate into the lower troposphere in terms of mesoscale disturbances and precipitation, proving that the upper-level jet imposes a noticeable top-down influence on the Mei-yu front system.     

Antibiotics in the Hong Kong metropolitan area: Ubiquitous distribution and fate in Victoria Harbour

We investigated the presence and fate of 16 antibiotics belonging to seven groups (β-lactams, fluoroquinolones, macrolides, sulfonamides, tetracyclines, trimethoprim and amphenicols) in effluents of sewage plants and receiving waters in Hong Kong. Cefalexin, amoxicillin, ofloxacin and erythromycin-H₂O were ubiquitous in sea water throughout Victoria Harbour, indicating continuous discharge to the environment. This is one of the few studies reporting the frequent occurrence of cefalexin and amoxicillin in sewage effluents and sea water (170-5070 and 64-1670 ng/L in sewage; 6.1-493 and 0.64-76 ng/L in sea water, respectively). Mass flows from seven sewage plants discharged an estimated total of 14.4 kg/day to the Harbour. Typhoon shelters also appeared to play an important role as sources of antibiotics, as evidenced by elevated concentrations within their boundaries. Mass balance estimations suggested significant quantities of antibiotics are discharged to the Harbour without passage through treatment plants.     

基于越南遥感时间序列数据的湄公河三角洲土地利用及河岸变化检测研究

通过采用先进的遥感技术,基于光学和雷达时间序列卫星影像（陆地卫星,SPOT和雷达卫星）,本文对金瓯半岛（位于湄公河三角洲南部）土地覆被变化及湄公河河岸侵蚀情况进行了检测研究。鉴于金瓯半岛典型的土地覆被类型为红树林,通过对1973-2008年红树林遥感影像分析发现,近年来红树林林地面积急剧下降,超过一半的红树林已经转变为虾养殖场。与此同时,检测发现湄公河河岸已经被严重侵蚀,且侵蚀趋势正加速恶化。具体而言,田河和口河的左右两岸被认为是遭受严重侵蚀的热点区域。本文以1966-1968年地形图作为基准线数据,与1989-2009年卫星影像数据进行比照分析,此外采用数字海岸线分析系统（DSAS）模型对未来变化趋势进行了预测。     

Observations of H2S toward OMC-1

Interstellar hydrogen sulfide (H2S) and its isotopic variant (H2(34)S) have been observed toward several positions in OMC-1 via their 1(10)-1(01) transitions near 168 GHz using the FCRAO 14 m telescope. We derive total column densities toward Orion(KL) for the extended ridge, for the plateau, and for the hot core, in addition to values for other positions in OMC-1. The fractional abundance of H2S (approximately 10(-9)) in the quiescent regions of OMC-1 seems to be difficult to explain by currently known ion-molecule reactions. The fractional abundance of H2S relative to H2 is enhanced by a factor of 1000 in the hot core and the plateau relative to the quiescent clouds. This enhancement may be a result of grain surface chemistry and/or of high-temperature gas-phase chemistry. From the nondetection of HDS in its 2(11)-2(12) transition, we estimate the abundance ratio [HDS]/H2S] < or = 0.02 in the hot core.     

Observations of some oxygen-containing and sulfur-containing organic molecules in cold dark clouds

Observations of nine oxygen- and sulfur-containing organic molecules have been made toward the cold dark clouds TMC-1 and L134N. We have confirmed the presence of para-ketene (H2C2O) in TMC-1, have for the first time observed ortho-ketene, and find a total ketene column density approximately 1 x 10(13) cm-2. Thioformaldehyde (H2CS) is easily detectable in both TMC-1 and L134N, with a column density about 5 times larger in the former source (approximately 3 x 10(13) cm-2). The fractional abundance of ketene is comparable to the predictions of ion-molecule chemistry, while that of thioformaldehyde in TMC-1 is one to two orders of magnitude greater than that expected from such models at steady state. Interstellar sulfur chemistry thus continues to be poorly understood. We set upper limits for the column densities of formic acid (HCOOH), vinyl alcohol (CH2CHOH), methyl formate (HCO2CH3), formamide (NH2CHO), methyl mercaptan (CH3SH), isothiocyanic acid (HNCS), and thioketene (H2C2S) in both sources.     

Modelling of steady‐state fluid flow in 3D fractured isotropic porous media: application to effective permeability calculation

In this paper, 3D steady‐state fluid flow in a porous medium with a large number of intersecting fractures is derived numerically by using collocation method. Fluid flow in the matrix and fractures is described by Darcy's law and Poiseuille's law, respectively. The recent theoretical development presented a general potential solution to model the steady‐state flow in fractured porous media under a far‐field condition. This solution is a hypersingular integral equation with pressure field in the fracture surfaces as the main unknown. The numerical procedure can resolve the problem for any form of fractures and also takes into account the interactions and the intersection between fractures. Once the pressure field and then the flux field in fractures have been determined, the pressure field in the porous matrix is computed completely. The basic problem of a single fracture is investigated, and a semi‐analytical solution is presented. Using the solution obtained for a single fracture, Mori‐Tanaka and self‐consistent schemes are employed for upscaling the effective permeability of 3D fractured porous media. Copyright © 2012 John Wiley & Sons, Ltd.     

Theoretical and numerical study of the steady‐state flow through finite fractured porous media

This paper investigates the two‐dimensional flow problem through an anisotropic porous medium containing several intersecting curved fractures. First, the governing equations of steady‐state fluid flow in a fractured porous body are summarized. The flow follows Darcy's law in matrix and Poiseuille's law in fractures. An infinite transversal permeability is considered for the fractures. A multi‐region boundary element method is used to derive a general pressure solution as a function of discharge through the fractures and the pressure and the normal flux on the domain boundary. The obtained solution fully accounts for the interaction and the intersection between fractures. A numerical procedure based on collocation method is presented to compute the unknowns on the boundaries and on the fractures. The numerical solution is validated by comparing with finite element solution or the results obtained for an infinite matrix. Pressure fields in the matrix are illustrated for domains containing several interconnected fractures, and mass balance at the intersection points is also checked. Copyright © 2013 John Wiley & Sons, Ltd.