On the variability of the Charnock constant and the functional dependence of the drag coefficient on wind speed: Part II-Observations

An analytical expression for the 10 m drag law in terms of the 10 m wind speed at the maximum in the 10 m drag coefficient, and the Charnock constant is presented, which is based on the results obtained from a model of the air-sea interface derived in Bye et al. (2010). This drag law is almost independent of wave age and over the mid-range of wind speeds (5?17 ms^?1) is very similar to the drag law based on observed data presented in Foreman and Emeis (2010). The linear fit of the observed data which incorporates a constant into the traditional definition of the drag coefficient is shown to arise to first-order as a consequence of the momentum exchange across the air-sea boundary layer brought about by wave generation and spray production which are explicitly represented in the theoretical model.     

On the variability of the Charnock constant and the functional dependence of the drag coefficient on wind speed

A model for the air–sea interface, based on the coupled pair of similarity relations for “aerodynamically” rough flow in both fluids, is presented, which is applied to fetch-limited and high wind speed conditions which occur, for example, in hurricanes. It is shown that the specification of the maximum 10-m drag coefficient and the 10-m wind speed and the peak wave speed at which it occurs are sufficient to uniquely determine the drag law, which asymptotes at low wind speeds to a Charnock constant similar to that for the fully developed wind wave sea and is almost independent of the peak wave speed at the maximum in drag coefficient. A feature of the drag law is that it is of Charnock form, almost independent of the wave age, consistent with the transfer of momentum to the wave spectrum being due to the smaller rather than the dominant wavelengths. The analysis is also applied to a variable sea state in which either the surface wind or the surface Stokes drift vary, but the peak wave speed is kept constant. The corresponding variability in the Charnock constant is in general accord with observations.     

Petrophysical and geochemical constraints on alteration processes in granites

The hydrothermal alteration of granites has large influence on their petrophysical properties. To reveal the impact of alteration on magnetic and porosity properties of granites we have conducted a complex study of effects of two largely independent alteration processes, related to chemically different fluids, in granites of the Vysoký Kámen stock (the Krudum granite body, Czech Republic). It includes the whole-rock geochemical, magnetic and pore-space characterization. The alkali feldspathization resulted in decomposition of Li-mica, quartz removal, depletion in mafic cations and growth of new alkali feldspars (albite, K-feldspar), decreasing the overall magnetic susceptibility and disrupting the pore space by its discontinuation. The preservation of the orientation of the principal susceptibility axes is likely related to insignificant influence of the feldspathization process on the paramagnetic and diamagnetic phases orientation acquired during the magma emplacement. The greisenization, on the other hand had considerably more significant effects on microstructure and physical properties of the granite. The microstructure was modified by the growth of large amounts of new phases (Li-mica, quartz and topaz). This changed the mineral density of the rock, the porosity, size and character of pores to larger, flatter and probably more connected. This led also to the complete reworking of the original anisotropy of magnetic susceptibility during the greisenization.     

Partitioning of rare earth and high field strength elements between titanite and phonolitic liquid

We present the results of a LA–ICPMS study of titanites and associated glasses from the mixed-magma phonolitic Fasnia Member of the Diego Hernández Formation, Tenerife, Canary Islands. We employ a method of identifying equilibrium mineral–melt pairs from natural samples using REE contents and a linear form of the lattice strain model equation (Blundy and Wood, 1994), where the Young's modulus (E_M) for the 7-fold coordinated site is an output variable. For felsic magmas that contain crystals potentially derived from a variety of environments within the system, this approach is more rigorous than the use of solely textural criteria such as mineral–glass proximity. We then estimate titanite/melt partition coefficients for Y, Zr, Nb, REE, Hf, Ta, U and Th. In common with prior studies, we find that middle REE partition more strongly into titanite than either light or heavy REE, and that REE partitioning behavior in titanite is reasonably predicted by the lattice strain model. Titanite also fractionates Y from Ho, Zr from Hf, and Nb from Ta. Comparison with experimental data indicates that melt structure effects on partitioning are significant, most particularly in very highly polymerized melts. We use the data to estimate 7-fold coordination radii for trivalent Pr, Nd, Ho, Tm and Lu, and to make approximate predictions of titanite/melt partitioning of Ra, Ac and Pa. Interpolation of data for heavy REE does not predict the behavior of Y, indicating that factors other than charge and radius are involved in partitioning. Variations in Y/Ho induced by magmatic processes appear to be negatively correlated with temperature, and are expected to be greatest in near-minimum melts.     

Fluid evolution of the Hub Stock, Horní Slavkov–Krásno Sn–W ore district, Bohemian Massif, Czech Republic

The Horní Slavkov–Krásno Sn–W ore district is hosted by strongly altered Variscan topaz–albite granite (Krudum granite body) on the northwestern margin of the Bohemian Massif. We studied the fluid inclusions on greisens, ore pockets, and ore veins from the Hub Stock, an apical expression of the Krudum granite. Fluid inclusions record almost continuously the post-magmatic cooling history of the granite body from ～500 to <50°C. Rarely observed highest-temperature (～500°C) highest-salinity (～30?wt.% NaCl eq.) fluid inclusions are probably the result of secondary boiling of fluids exsolved from the crystallizing magma during pressure release which followed hydraulic brecciation of the gneissic mantle above the granite cupola. The greisenization was related to near-critical low-salinity (0–7?wt.% NaCl eq.) aqueous fluids with low amount of CO₂, CH₄, and N₂ (≤10?mol% in total) at temperatures of ～350–400°C and pressures of 300–530 bar. Crush-leach data display highly variable and negatively correlated I/Cl and Br/Cl values which are incompatible with both orthomagmatic and/or metamorphic origin of the fluid phase, but can be explained by infiltration of surficial and/or sedimentary fluids. Low fluid salinity indicates a substantial portion of meteoric waters in the fluid mixture that is in accordance with previous stable isotope data. The post-greisenization fluid activity associated with vein formation and argillitization is characterized by decreasing temperature (<350 to <50°C), decreasing pressure (down to ～50–100 bar), and mostly also decreasing salinity.     

Nb-Ta-Ti oxides fractionation in rare-metal granites: Kr��sno-Horn�� Slavkov ore district, Czech Republic

Nb-Ta-Ti-bearing oxide minerals (Nb-Ta-bearing rutile, columbite-group minerals) represent the most common Nb-Ta host in topaz-albite granites and related rocks from the Krásno-Horní Slavkov ore district. Tungsten-bearing columbite-(Fe), W-bearing ixiolite, wodginite and tapiolite-(Fe) are extremely rare in these rocks. Rutile contains significant levels of Ta (up to 37?wt.% Ta₂O₅) and Nb (up to 24?wt.% Nb₂O₅), with Ta/(Ta?+?Nb) ratio ranging from 0.04 to 0.61. Columbite-group minerals are represented mostly by columbite-(Fe) and rarely by columbite-(Mn), with Mn/(Mn?+?Fe) ratio ranging from 0.23 to 0.94. The exceptionally rare Fe-rich, W-bearing ixiolite occurs only as inclusions in Nb-Ta-bearing rutile from quartz-free alkali-feldspar syenites (Vysoky Kámen stock). Wodginite was found only in the topaz-albite microgranite of gneissic breccia matrix that occurs in the upper most part of the Hub topaz-albite granite stock. In wodginite, the Mn/(Mn?+?Fe) ratio is 0.42?C0.51, whereas the coexisting tapiolite-(Fe) has a distinctly lower Mn/(Mn?+?Fe) ratio close to 0.06.     

Contextual factors influencing sustainable fisheries in Mexico

Sustainable fisheries take into consideration that managed fisheries ecosystems shift over time in response to evolving environmental as well as market and political factors. These contextual forces are especially valuable in understanding developing countries such as Mexico, where the unconsolidated fisheries administration faces productive marine ecosystems but unsustainable fisheries. To recognize the issues that have inhibited the consolidation of a regulatory system for sustainable fisheries, a contextual factor analysis was applied to the co-development of two current policies in the Mexican fishery regime: fisheries and environmental policies. Six historical phases have been identified in which there are few long periods of stability and frequent short periods of radical change that alternate between stable and adverse contextual situations. These short and contrasting contextual situations cause a kind of tug-of-war in Mexican fisheries policy-making. On the one hand, domestic economic, scientific, and technological forces seem to slowly lead toward the consolidation of sustainable fisheries; on the other hand, domestic policies drift from one position to another at other timing than the international fisheries and environmental policies. Although recent crises seem to highlight new periods of radical change in Mexico, they also provide an opportunity to adopt new structural plans to consolidate domestic forces as a basis for long-term strategies.     

Hydrodynamics and sediment dynamics in the German Bight. A focus on observations and numerical modelling in the East Frisian Wadden Sea

This work deals with analysis of hydrographic observations and results of numerical simulations. The data base includes acoustic Doppler current profilers (ADCP) observations, continuous measurements on data stations and satellite data originating from the medium resolution imaging spectrometer (MERIS) onboard the European Space Agency (ESA) satellite ENVISAT with a spatial resolution of 300 m. Numerical simulations use nested models with horizontal resolutions ranging from 1 km in the German Bight to 200 m in the East Frisian Wadden Sea coupled with a suspended matter transport model. Modern satellite observations have now a comparable horizontal resolution with high-resolution numerical model of the entire area of the East Frisian Wadden Sea allowing to describe and validate new and so far unknown patterns of sediment distribution. The two data sets are consistent and reveal an oscillatory behaviour of sediment pools to the north of the back-barrier basins and clear propagation patterns of tidally driven suspended particulate matter outflow into the North Sea. The good agreement between observations and simulations is convincing evidence that the model simulates the basic dynamics and sediment transport processes, which motivates its further use in hindcasting, as well as in the initial steps towards forecasting circulation and sediment dynamics in the coastal zone.     

Mixing,hypersalinity and gradients in Hervey Bay,Australia

Hervey Bay, a large coastal embayment situated off the central eastern coast of Australia, is a shallow tidal area (average depth = 15 m), close to the continental shelf. It shows features of an inverse estuary, due to the high evaporation rate (approx. 2 m/year), low precipitation (less than 1 m/year) and on average almost no freshwater input from rivers that drain into the bay. The hydro- and thermodynamical structures of Hervey Bay and their variability are presented here for the first time, using a combination of four-dimensional modelling and observations from field studies. The numerical studies are performed with the Coupled Hydrodynamical Ecological Model for Regional Shelf Seas (COHERENS). Due to the high tidal range (>3.5 m), the bay is considered as a vertically well-mixed system, and therefore, only horizontal fronts are likely. Recent field measurements, but also the numerical simulations, indicate characteristic features of an inverse/hypersaline estuary with low salinity (35.5 psu) in the open ocean and peak values (>39.0 psu) in the head water of the bay. The model further predicts a nearly persistent mean salinity gradient of 0.5 psu across the bay (with higher salinities close to the shore). The investigation further shows that air temperature, wind direction and tidal regime are mainly responsible for the stability of the inverse circulation and the strength of the salinity gradient across the bay. Due to an ongoing drying trend, the occurrence of severe droughts at the central east coast of Australia and, therefore, a reduction in freshwater supply, the salinity flux out of the bay has increased, and the inverse circulation has also strengthened.