The Rožná uranium deposit (Bohemian Massif, Czech Republic): shear zone-hosted, late Variscan and post-Variscan hydrothermal mineralization

Three major mineralization events are recorded at the Rožná uranium deposit (total mine production of 23,000 t U, average grade of 0.24% U): (1) pre-uranium quartz-sulfide and carbonate-sulfide mineralization, (2) uranium, and (3) post-uranium quartz-carbonate-sulfide mineralization. (1) K–Ar ages for white mica from wall rock alteration of the pre-uranium mineralization style range from 304.5 ± 5.8 to 307.6 ± 6.0 Ma coinciding with the post-orogenic exhumation of the Moldanubian orogenic root and retrograde-metamorphic equilibration of the high-grade metamorphic host rocks. The fluid inclusion record consists of low-salinity aqueous inclusions, together with H₂O-CO₂-CH₄, CO₂-CH₄, and pure CH₄ inclusions. The fluid inclusion, paragenetic, and isotope data suggest that the pre-uranium mineralization formed from a reduced low-salinity aqueous fluid at temperatures close to 300°C. (2) The uraniferous hydrothermal event is subdivided into the pre-ore, ore, and post-ore substages. K–Ar ages of pre-ore authigenic K-feldspar range from 296.3 ± 7.5 to 281.0 ± 5.4 Ma and coincide with the transcurrent reorganization of crustal blocks of the Bohemian Massif and with Late Stephanian to Early Permian rifting. Massive hematitization, albitization, and desilicification of the pre-ore altered rocks indicate an influx of oxidized basinal fluids to the crystalline rocks of the Moldanubian domain. The wide range of salinities of fluid inclusions is interpreted as a result of the large-scale mixing of basinal brines with meteoric water. The cationic composition of these fluids indicates extensive interaction with crystalline rocks. Chlorite thermometry yielded temperatures of 260°C to 310°C. During this substage, uranium was probably leached from the Moldanubian crystalline rocks. The hydrothermal alteration of the ore substage followed, or partly overlapped in time, the pre-ore substage alteration. K–Ar ages of illite from ore substage alteration range from 277.2 ± 5.5 to 264.0 ± 4.3 Ma and roughly correspond with the results of chemical U–Pb dating of authigenic monazite (268 ± 50 Ma). The uranium ore deposition was accompanied by large-scale decomposition of biotite and pre-ore chlorite to Fe-rich illite and iron hydrooxides. Therefore, it is proposed that the deposition of uranium ore was mostly in response to the reduction of the ore-bearing fluid by interaction with ferrous iron-bearing silicates (biotite and pre-ore chlorite). The Th data on primary, mostly aqueous, inclusions trapped in carbonates of the ore substage range between 152°C and 174°C and total salinity ranges over a relatively wide interval of 3.1 to 23.1 wt% NaCl eq. Gradual reduction of the fluid system during the post-ore substage is manifested by the appearance of a new generation of authigenic chlorite and pyrite. Chlorite thermometry yielded temperatures of 150°C to 170°C. Solid bitumens that post-date uranium mineralization indicate radiolytic polymerization of gaseous and liquid hydrocarbons and their derivatives. The origin of the organic compounds can be related to the diagenetic and catagenetic transformation of organic matter in Upper Stephanian and Permian sediments. (3) K–Ar ages on illite from post-uranium quartz-carbonate-sulfide mineralization range from 233.7 ± 4.7 to 227.5 ± 4.6 Ma and are consistent with the early Tethys-Central Atlantic rifting and tectonic reactivation of the Variscan structures of the Bohemian Massif. A minor part of the late Variscan uranium mineralization was remobilized during this hydrothermal event.     

Using multiresolution and multitemporal satellite data for post-disaster landslide inventory in the Republic of Serbia

This paper focuses on a specific event-based landslide inventory compiled after the May 2014 heavy rainfall episode in Serbia as a part of the post-disaster recovery actions. The inventory was completed for a total of 23 affected municipalities, and the municipality of Krupanj was selected as the location for a more detailed study. Three sources of data collection and analysis were used: a visual analysis of the post-event very high and high (VHR-HR) resolution images (Pléiades, WorldView-2 and SPOT 6), semi-automatic landslide recognition in pre- and post-event coarse resolution images (Landsat 8) and a landslide mapping field campaign. The results suggest that the visual and semi-automated analyses significantly contributed to the quality of the final inventory, including the associated planning strategies for conducting future field campaigns (as a final stage of the inventorying process), all the more so because the field-based and image-based inventories were focused on different types of landslides. In the most affected municipalities that had very high resolution satellite image coverage (19.52% of the whole study area), the density of the recognized landslides was approximately three times higher than that in those municipalities without satellite image coverage (where only field data were available). The total number of field-mapped landslides for the 23 municipalities was 1785, while image-based inventories, which were available only for the municipalities with satellite image coverage (77.43% of the study area), showed 1298 landslide records. The semi-automated landslide inventory in the test area (Krupanj municipality), which was based on coarse resolution multitemporal images (Landsat 8), counted 490 landslide instances and was in agreement with the visual analysis of the higher resolution images, with an overlap of approximately 40%. These results justify the use of preliminary inventorying via satellite image analysis and suggest a considerable potential use for preliminary visual and semi-automated landslide inventorying as an important supplement to field mapping.     

Magnetic properties of high-Ti basaltic rocks from the Krušné hory/Erzgebirge MTS. (Bohemia/Saxony), and their relation to mineral chemistry

This study provides new thermomagnetic and petrographic data on specific basaltic rock association from the broader vicinity of the Lou?ná-Oberwiesenthal volcanic centre, western Bohemia/Saxony. Two types of volcanic rocks were recognized there: (i) high-Ti types (3.5–5.2 wt% TiO₂) represented by (mela)nephelinite s.s., and sporadically present (ii) medium-Ti types (2.5–3.5 wt% TiO₂) of olivine nephelinite, nepheline basanite and phonotephrite compositions. In order to examine the rock-magnetic behaviour, they were studied for their variations in the Curie temperature (T_C) and field-dependent susceptibility, spinel group minerals, chemistry and petrology. Magnetic susceptibility of ulvöspinel-rich titanomagnetite, as a dominant magnetic carrier, depends on the amplitude of measured magnetic field, whereas pure magnetite is field-independent. Field dependence parameter ^kHD of the studied basaltic rocks ranges from 0.8 to 18.7%, TiO₂ contents in titanomagnetite range from 12.7 to 20.1 wt.%. TiO₂ content in titanomagnetite does not correlate with whole-rock TiO₂ content (2.8 to 5.6 wt.%). The content of substituted titanium in the sublattice of magnetite is also sensitively reflected in the Curie temperature, ranging from 200 to 580°C. The spinel group minerals are designated as titanomagnetite with the dominance of ulvöspinel, magnetite and magnesioferrite components, or titanomagnetite with the magnetite, ulvöspinel and magnesioferrite components. Only two samples are characterized by a significant presence of Cr-spinel and magnesiochromite components forming cores of titanomagnetites. The titanomagnetite-bearing rocks in the studied area, likewise the low- to medium-Ti basaltic rocks from the ?eské st?edoho?í Mts., provide similar thermomagnetic curves.     

A new approach to spatial data interpolation using higher-order statistics

Interpolation techniques for spatial data have been applied frequently in various fields of geosciences. Although most conventional interpolation methods assume that it is sufficient to use first- and second-order statistics to characterize random fields, researchers have now realized that these methods cannot always provide reliable interpolation results, since geological and environmental phenomena tend to be very complex, presenting non-Gaussian distribution and/or non-linear inter-variable relationship. This paper proposes a new approach to the interpolation of spatial data, which can be applied with great flexibility. Suitable cross-variable higher-order spatial statistics are developed to measure the spatial relationship between the random variable at an unsampled location and those in its neighbourhood. Given the computed cross-variable higher-order spatial statistics, the conditional probability density function is approximated via polynomial expansions, which is then utilized to determine the interpolated value at the unsampled location as an expectation. In addition, the uncertainty associated with the interpolation is quantified by constructing prediction intervals of interpolated values. The proposed method is applied to a mineral deposit dataset, and the results demonstrate that it outperforms kriging methods in uncertainty quantification. The introduction of the cross-variable higher-order spatial statistics noticeably improves the quality of the interpolation since it enriches the information that can be extracted from the observed data, and this benefit is substantial when working with data that are sparse or have non-trivial dependence structures.     

Spatial variability in community structure of Dictyoceratida sponges across Torres Strait,Australia

Spatial variability in community structure of dictyoceratid sponges (class Demospongiae; order Dictyoceratida) was examined on coral reefs in Torres Strait, an archipelago of islands and reefs between northern Queensland, Australia, and Papua New Guinea. Dictyoceratid sponge abundances and environmental factors were recorded at four locations, separated by 50–220 km. Each location was subdivided into 5–7 sites, each ?2 km apart. At each site, four 50×2 m belt transects were quantitatively surveyed, recording the dictyoceratid numbers, substrate type (rock, rubble and sand), water clarity, degree of reef slope and depth. Dictyoceratid abundance was similar among locations over large spatial scales, averaging 15.5 individuals per 100 m², but varied significantly among sites within particular locations (i.e. small scale heterogeneity). Twenty-three dictyoceratid species were recorded in Torres Strait, with approximately half (12/23) found in only one location. The canonical correspondence analysis determined that the measured environmental factors explained only 26% of the spatial variation. Cluster analysis revealed a complex dictyoceratid community structure with similarities among neighbouring sites and among sites separated by hundreds of kilometres. Conversely the abundance and composition of dictyoceratids could vary greatly between neighbouring sites 2 km apart and on the same reef complex. The results of this study suggest that spatial variability of dictyoceratid sponges in Torres Strait is influenced by a combination of environmental, biological and stochastic processes.     

Assessing volcanic origins within detrital zircon populations——A case study from the Mesozoic non-volcanic margin of southern Australia

Detrital zircon U/Pb geochronology is a common tool used to resolve stratigraphic questions,inform basin evolution and constrain regional geological histories.In favourable circumstances,detrital zircon populations can contain a concomitant volcanic contribution that provides constraints on the age of deposition.However,for non-volcanic settings,proving isolated detrital zircon grains are from contemporaneous and potentially remote volcanism is challenging.Here we use same grain(U-Th)/He thermochronology coupled with U/Pb geochronology to identify detrital zircon grains of contemporary volcanic origin.(U-Th)/He ages from Cretaceous zircon grains in southern Australia define a single population with a weighted mean age of 104±6.1 Ma.indistinguishable from zircon U/Pb geochronology and palynology(～104.0-107.5 Ma).Detrital zircon trace-element geochemistry is consistent with a continental signature for parent rocks and coupled with detrital grain ages,supports derivation from a2000 km distant early-to mid-Cretaceous Whitsunday Volcanic Province in eastern Australia.Thus,integration of biostratigraphy,single-grain zircon double-dating(geochronology and thermochronology)and grain geochemistry enhances fingerprinting of zircon source region and transport history.A distal volcanic source and rapid continental-scale transport to southern Australia is supported here.     

Atmospheric drag coefficients over sea ice — validation of a parameterisation concept

The concept of drag partitioning to parameterise the surface roughness of sea ice is validated using topography data of regions with high sea ice concentrations. The parameterised drag is compared to measurements obtained by aircraft and ship. The form drag can well be expressed as a function of mean ridge heights and spacings averaged over flight legs of 12 km, if an improved approximation for the coefficient of resistance of a single ridge is used. We find a good agreement between the parameterised and observed drag coefficients. The highest sea ice roughness was encountered close to coastal regions and the lowest in the central Arctic.     

Diverse mantle and crustal components in lavas of the NW Cerros del Rio volcanic field,Rio Grande Rift,New Mexico

Products of Pliocene (2–4 Ma) mafic to intermediate volcanism in the northwestern Cerros del Rio, a dominantly mafic volcanic field in the Española Basin of the Rio Grande Rift (RGR), range from 49% to 63% SiO₂ and exhibit diversity in silica saturation, trace-element patterns, and isotopic compositions. Tholeiites, which are largely confined to west of the Rio Grande, have trace-element abundances that resemble those of oceanic basalts, but with mild depletions in Nb and Ta, and high ⁸⁷Sr/⁸⁶Sr, low ¹⁴³Nd/¹⁴⁴Nd, and high δ¹⁸O compared to typical OIB. They are regarded as asthenospherically-derived magmas contaminated with continental crust. Alkali basalts and hawaiites erupted from vents east of the Rio Grande are geochemically distinct, having generally higher overall incompatible-element abundances, but with pronounced depletions in K, Rb, Nb and Ta with respect to Th and LREE. Spatially-associated benmoreites, mugearites and latites (collectively termed “evolved” lavas) have similar trace-element characteristics to the mafic mildly-alkaline compositions, but are typically not as depleted in K. Hawaiites and evolved lavas exhibit a good negative correlation of ¹⁴³Nd/¹⁴⁴Nd with SiO₂, due to interaction with lower continental crust. The most silicic “evolved” lavas carry the highest proportions of crustal material, and consequently have higher K/Th than the related hawaiites. Several (mostly mafic) lavas contain abundant crustally-derived resorbed quartz xenocrysts in O-isotope disequilibrium with the host magma. The δ¹⁸O values of xenocrystic quartz range over 4‰, indicating a variety of quartz-bearing crustal contaminants beneath the Española Basin. The hawaiites, with their unusual combination of trace-element enrichments and depletions, cannot be generated by any process of fractionation or crustal contamination superposed on a common mantle source type (oceanic or arc-source). It is a regional mantle source type, inasmuch as it was also present beneath NW Colorado during the mid-late Cenozoic. We argue that the hawaiite source must have originally existed as arc-source mantle enriched in LILE, generated during Mesozoic to early Cenozoic subduction at the western margin of North America. This arc-source mantle lost K, Rb and Ba, but not Th or LREE, prior to magmagenesis. Selective element loss may have occurred during lithospheric thinning and uprise of hydrated phlogopitebearing peridotite-possibly as a thermal boundary layer between lithosphere and asthenosphere — to shallow mantle depths, with consequent conversion of phlogopite to amphibole (an inferior host for K, Rb and Ba). We suggest that this occurred during the early extensional phase of the northern RGR. Further extension was accompanied by partial melting and release of magma from this source and the underlying asthenosphere, which by the Pliocene was of oceanic type. The hawaiite source mantle is the product of a long history of subduction succeeded by lithospheric extension of the formerly overriding plate. Similar chemical signatures may have developed in the mantle beneath other regions with comparable histories.     

Multiperiodic irradiance changes caused by r-modes and g-modes

The acceleration of the influential 100 keV electrons in flares observed in hard X-rays and several radio emissions is unknown. Shock-waves and MHD turbulence, successfully applied to interprete interplanetary energetic particles, have recently been called in question concerning energetic flare electrons and ions. Other possible mechanisms are considered which are closely related to the primary flare energy release. In particular, runaway acceleration by the electric field of the reconnection current sheet, bulk heating by microturbulence, and cross-field ion currents due to bulk motion as a primary result of reconnection are reviewed. All three are likely to occur in some way. Their relative importance cannot be definitively assessed due to the lack of information on non-thermal, low energy protons.Proceedings of the Second CESRA Workshop on Particle Acceleration and Trapping in Solar Flares, held at Aubigny-sur-Nère (France), 23–26 June, 1986.     

Prediction of the drag law for air–sea momentum exchange

In this paper, we use the inertial coupling relation as a similarity model for the air–sea boundary layer, to predict the 10-m drag coefficient. Excellent agreement with the commonly used statistical relationship of Garratt (1992) is found for a fully developed growing wind wave sea with a constant inertial drag coefficient, K_I = 1.5 × 10^–3. This suggests that the inertial coupling model can be used to realistically predict the 10 m drag coefficient under more general wind wave conditions.Acknowledgements The paper was completed while JATB was a Fellow at the Hanse-Wissenschaftskolleg in Delmenhorst, Germany, in July and August 2004. The comments of two anonymous reviewers are gratefully acknowledged.