Comparison of water-level,extensometric, DInSAR and simulation data for quantification of subsidence in Murcia City (SE Spain)

Subsidence due to groundwater overexploitation has been recognized in the metropolitan area of Murcia (25 km²) in south-eastern Spain since the early 1990s. Previous published works have focused their attention on land subsidence that occurred during the drought period between 1995 and 2008. This work first analyzes the groundwater recovery that has occurred since 2008 and then determines the kind of associated ground deformation detected by the new extensometric data. Subsequently, subsidence time series are computed on 24 geotechnical boreholes scattered throughout the study area by means of a hydro-mechanical finite element code and a linear-elastic constitutive law. A spatio-temporal interpolation of the numerically modeled surface displacements is performed over the whole domain and compared with extensometers and DInSAR-derived displacement maps in two different periods: the drought period from 2004 to 2008, and the recovery period from 2008 to 2012. In spite of the limited information on the geomechanical parameters characterizing the modelled geological formations, the proposed approach is able to discriminate areas where the soils have an elastic behavior (small differences in the comparisons) or an elasto-plastic behavior (large differences in the comparisons). This zonation enhances the understanding of the subsidence phenomenon in Murcia City and could prevent, from a quantitatively point of view, future severe subsidence due to aquifer overexploitation.     

A multi-tracer approach to delineate groundwater dynamics in the Rio Actopan Basin,Veracruz State,Mexico

Geochemistry and environmental tracers were used to understand groundwater resources, recharge processes, and potential sources of contamination in the Rio Actopan Basin, Veracruz State, Mexico. Total dissolved solids are lower in wells and springs located in the basin uplands compared with those closer to the coast, likely associated with rock/water interaction. Geochemical results also indicate some saltwater intrusion near the coast and increased nitrate near urban centers. Stable isotopes show that precipitation is the source of recharge to the groundwater system. Interestingly, some high-elevation springs are more isotopically enriched than average annual precipitation at higher elevations, indicating preferential recharge during the drier but cooler winter months when evapotranspiration is reduced. In contrast, groundwater below 1,200 m elevation is more isotopically depleted than average precipitation, indicating recharge occurring at much higher elevation than the sampling site. Relatively cool recharge temperatures, derived from noble gas measurements at four sites (11–20 °C), also suggest higher elevation recharge. Environmental tracers indicate that groundwater residence time in the basin ranges from 12,000 years to modern. While this large range shows varying groundwater flowpaths and travel times, ages using different tracer methods (¹⁴C, ³H/³He, CFCs) were generally consistent. Comparing multiple tracers such as CFC-12 with CFC-113 indicates piston-flow to some discharge points, yet binary mixing of young and older groundwater at other points. In summary, groundwater within the Rio Actopan Basin watershed is relatively young (Holocene) and the majority of recharge occurs in the basin uplands and moves towards the coast.     

Changing human-environment interactions in medium mountains: the Apuseni Mts (Romania) as a case study

The study of human-environment relationships in mountain areas is important for both theoretical and practical reasons, as many mountain areas suffer similar problems, such as depopulation, unemployment and natural hazards. Medium mountains constitute a special case within mountains, because they are more populated but less attractive as tourist destinations than high mountains. In this context, the Apuseni Mts (Romania) are considered as a case study. In this paper, we apply GIS-based, quantitative methods to characterize the strength and dynamics of human-environment interactions, taking into consideration some environmental factors (elevation, relative height, slope, river distance, lithology, land cover, natural attractions) as well as historical population and recent tourism data. We found that population density has strong (r ²>0.8) relationships with all relief factors (elevation, relative height, slope, river distance), and that best-fit functions are nonlinear. We outlined the varying demographic scenarios by elevation zones and interpreted the historically switching sign of population change versus elevation relationship. We demonstrated that lithology also has an impact on the spatial distribution of population, although it is not independent from the relief effect. The land cover of the mainly cultural landscape is very strongly correlated with relief parameters (especially slope), which suggests good adaptation. We pointed out the dominance of karst objects in the natural tourism potential of the Apuseni Mts and also explored further components of real tourism (spas, heritage, towns). Finally, we concluded that the environmental settings investigated do in fact constrain the spatial framework of society, but socio-economic changes in history can be explained from the side of society, which conforms to the theory of cultural possibilism.     

Market-driven organizational lock-in: A case study of a former first mover

ABSTRACT

The article addresses the question of how an innovative firm develops from being a first mover to an innovation laggard and whether this process can be reversed. Informed by the evolutionary perspective and path-dependence theory, the authors explore how a low-tech Norwegian firm in the oil and gas industry has lost its foothold as an innovator. They also employ the concept of organizational architecture as an analytical tool to investigate the agency for breaking organizational paths. Through participant observation and semi-structured interviews, their study revealed that the innovation activity of the case firm is in a state of lock-in following a path-dependence development. Product development in the firm is linked to incremental changes to existing products based on the feedback from the customer, and the process is characterized by knowledge exploitation rather than knowledge exploration. The article adds to the literature on path dependence by identifying how a strong market pull can be a driver for organizational path dependence and lock-in.     

MORPHOMETRIC ANALYSIS OF KARST DEPRESSIONS ON A MEDITERRANEAN KARST MASSIF

Dolines are the most typical landform in karst landscapes. They play an important role in karst hydrogeology; they are effective sediment traps that provide information about past climates and karst evolution, and can also be indicators of tectonic activity. The morphometic analysis of those depressions can help in their study and interpretation. However, detailed identification and delineation of dolines becomes increasingly difficult when the study area is very large, of limited access or covered by vegetation. Here, we have used a method developed by the authors for automatic identification and delineation of karst depressions based on the use of a pit removal algorithm. Next a complete morphometric analysis of the karst depressions has been carried out. The main advantage of the methodology is that by delineating and identifying the depth of each doline from its rim, many morphometric statistics can be obtained, including the relation of doline depth and area with respect to altitude, the main doline orientations, doline density, the fractal dimension of doline area and frequency, and point field analysis, among others. The results are interpreted from a geomorphological point of view and the mapped dolines can be easily integrated into geomorphological mapping. A case study is presented from the large Sierra Gorda karst massif in southern Spain, where 3100 depressions have been identified. A strong structural control of doline shape and orientation is demonstrated; the main areas of doline density are highlighted and doline size is shown to follow a fractal law.     

Carbon and nitrogen isotope,and mineral inclusion studies on the diamonds from the Pozanti–Karsanti chromitite,Turkey

The Pozanti–Karsanti ophiolite (PKO) is one of the largest oceanic remnants in the Tauride belt, Turkey. Micro-diamonds were recovered from the podiform chromitites, and these diamonds were investigated based on morphology, color, cathodoluminescence, nitrogen content, carbon and nitrogen isotopes, internal structure and inclusions. The diamonds recovered from the PKO are mainly mixed-habit diamonds with sectors of different brightness under the cathodoluminescence images. The total δ¹³C range of the PKO diamonds varies between ??18.8 and ??28.4‰, with a principle δ¹³C mode at ??25‰. Nitrogen contents of the diamonds range from 7 to 541 ppm with a mean value of 171 ppm, and the δ¹⁵N values range from ??19.1 to 16.6‰, with a δ¹⁵N mode of ??9‰. Stacking faults and partial dislocations are commonly observed in the Transmission Electron Microscopy foils whereas inclusions are rather rare. Combinations of (Ca_0.81Mn_0.19)SiO₃, NiMnCo-alloy and nano-sized, quenched fluid phases were observed as inclusions in the PKO diamonds. We believe that the ¹³C-depleted carbon signature of the PKO diamonds derived from previously subducted crustal matter. These diamonds may have crystallized from C-saturated fluids in the asthenospheric mantle at depth below 250 km which were subsequently carried rapidly upward by asthenospheric melts.     

Experimental study of quartz inclusions in garnet at pressures up to 3.0 GPa: evaluating validity of the quartz-in-garnet inclusion elastic thermobarometer

Garnet crystals with quartz inclusions were hydrothermally crystallized from oxide starting materials in piston–cylinder apparatuses at pressures from 0.5 to 3 GPa and temperatures ranging from 700 to 800 °C to study how entrapment conditions affect remnant pressures of quartz inclusions used for quartz-in-garnet (QuiG) elastic thermobarometry. Systematic changes of the 128, 206 and 464 cm^?1 Raman band frequencies of quartz were used to determine pressures of quartz inclusions in garnet using Raman spectroscopy calibrations that describe the P–T dependencies of Raman band shifts for quartz under hydrostatic pressure. Within analytical uncertainties, inclusion pressures calculated for each of the three Raman band frequencies are equivalent, which suggests that non-hydrostatic stress effects caused by elastic anisotropy in quartz are smaller than measurement errors. The experimental quartz inclusions have pressures ranging from ??0.351 to 1.247 GPa that span the range of values observed for quartz inclusions in garnets from natural rocks. Quartz inclusion pressures were used to model P–T conditions at which the inclusions could have been trapped. The accuracy of QuiG thermobarometry was evaluated by considering the differences between pressures measured during experiments and pressures calculated using published equation of state parameters for quartz and garnet. Our experimental results demonstrate that Raman measurements performed at room temperature can be used without corrections to estimate garnet crystallization pressures. Calculated entrapment pressures for quartz inclusions in garnet are less than ~?10% different from pressures measured during the experiments. Because the method is simple to apply with reasonable accuracy, we expect widespread usage of QuiG thermobarometry to estimate crystallization conditions for garnet-bearing silicic rocks.     

An experimental study of Fe–Ni exchange between sulfide melt and olivine at upper mantle conditions: implications for mantle sulfide compositions and phase equilibria

The behavior of nickel in the Earth’s mantle is controlled by sulfide melt–olivine reaction. Prior to this study, experiments were carried out at low pressures with narrow range of Ni/Fe in sulfide melt. As the mantle becomes more reduced with depth, experiments at comparable conditions provide an assessment of the effect of pressure at low-oxygen fugacity conditions. In this study, we constrain the Fe–Ni composition of molten sulfide in the Earth’s upper mantle via sulfide melt–olivine reaction experiments at 2 GPa, 1200 and 1400 °C, with sulfide melt \(X_{{{\text{Ni}}}}^{{{\text{Sulfide}}}}=\frac{{{\text{Ni}}}}{{{\text{Ni}}+{\text{Fe}}}}\) (atomic ratio) ranging from 0 to 0.94. To verify the approach to equilibrium and to explore the effect of \({f_{{{\text{O}}_{\text{2}}}}}\) on Fe–Ni exchange between phases, four different suites of experiments were conducted, varying in their experimental geometry and initial composition. Effects of Ni secondary fluorescence on olivine analyses were corrected using the PENELOPE algorithm (Baró et al., Nucl Instrum Methods Phys Res B 100:31–46, 1995), “zero time” experiments, and measurements before and after dissolution of surrounding sulfides. Oxygen fugacities in the experiments, estimated from the measured O contents of sulfide melts and from the compositions of coexisting olivines, were 3.0?±?1.0 log units more reduced than the fayalite–magnetite-quartz (FMQ) buffer (suite 1, 2 and 3), and FMQ ??1 or more oxidized (suite 4). For the reduced (suites 1–3) experiments, Fe–Ni distribution coefficients \(K_{{\text{D}}}^{{}}=\frac{{(X_{{{\text{Ni}}}}^{{{\text{sulfide}}}}/X_{{{\text{Fe}}}}^{{{\text{sulfide}}}})}}{{(X_{{{\text{Ni}}}}^{{{\text{olivine}}}}/X_{{{\text{Fe}}}}^{{{\text{olivine}}}})}}\) are small, averaging 10.0?±?5.7, with little variation as a function of total Ni content. More oxidized experiments (suite 4) give larger values of K_D (21.1–25.2). Compared to previous determinations at 100 kPa, values of K_D from this study are chiefly lower, in large part owing to the more reduced conditions of the experiments. The observed difference does not seem attributable to differences in temperature and pressure between experimental studies. It may be related in part to the effects of metal/sulfur ratio in sulfide melt. Application of these results to the composition of molten sulfide in peridotite indicates that compositions are intermediate in composition (\(X_{{{\text{Ni}}}}^{{{\text{sulfide}}}}\)?~?0.4–0.6) in the shallow mantle at 50 km, becomes more Ni rich with depth as the O content of the melt diminishes, reaching a maximum (0.6–0.7) at depths near 80–120 km, and then becomes more Fe rich in the deeper mantle where conditions are more reduced, approaching (\(X_{{{\text{Ni}}}}^{{{\text{sulfide}}}}\)?~?0.28)?>?140 km depth. Because Ni-rich sulfide in the shallow upper mantle melts at lower temperature than more Fe-rich compositions, mantle sulfide is likely molten in much of the deep continental lithosphere, including regions of diamond formation.