Geostatistical regionalization of glacial aquitard thickness in northwestern Germany, based on fuzzy kriging

In many instances hydrogeological parameters obtained by conventional methods for selected localities within an aquifer or an aquitard are not sufficient for adequate regionalization at the scale of the entire layer. Here, we demonstrate an application of the fuzzy kriging method in regionalization of hydrogeological data, in which the set of conventional, crisp values is supplemented by imprecise information subjectively estimated by an expert. It is believed that such an approach eventually may reflect the real-world conditions more closely than a traditional crisp-value approach, because the former does not impose exactness artificially on phenomena which are diffuse by their nature. Spatial interpolation was done for the thickness of one of the major aquitards (till and glaciolacustrine clay) in northwestern Germany. The dataset consists of 329 crisp values from boreholes supplemented by 172 imprecise values defined as fuzzy numbers. It is demonstrated that the reliability of regionalization was higher, compared to regionalization performed with the crisp dataset only. Fuzzy kriging was performed with FUZZEKS (Fuzzy Evaluation and Kriging System) developed at the Ecosystem Research Center at the University of Kiel.     

Modeling coastal tsunami hazard from submarine mass failures: effect of slide rheology,experimental validation,and case studies off the US East Coast

Natural Hazards - We perform numerical simulations to assess how coastal tsunami hazard from submarine mass failures (SMFs) is affected by slide kinematics and rheology. Two types of two-layer SMF...     

U–Pb and Th–Pb dating of apatite by LA-ICPMS

Apatite is a common U- and Th-bearing accessory mineral in igneous and metamorphic rocks, and a minor but widespread detrital component in clastic sedimentary rocks. U–Pb and Th–Pb dating of apatite has potential application in sedimentary provenance studies, as it likely represents first cycle detritus compared to the polycyclic behavior of zircon. However, low U, Th and radiogenic Pb concentrations, elevated common Pb and the lack of a U–Th–Pb apatite standard remain significant challenges in dating apatite by LA-ICPMS, and consequently in developing the chronometer as a provenance tool.This study has determined U–Pb and Th–Pb ages for seven well known apatite occurrences (Durango, Emerald Lake, Kovdor, Mineville, Mud Tank, Otter Lake and Slyudyanka) by LA-ICPMS. Analytical procedures involved rastering a 10 μm spot over a 40 × 40 μm square to a depth of 10 μm using a Geolas 193 nm ArF excimer laser coupled to a Thermo ElementXR single-collector ICPMS. These raster conditions minimized laser-induced inter-element fractionation, which was corrected for using the back-calculated intercept of the time-resolved signal. A Tl–U–Bi–Np tracer solution was aspirated with the sample into the plasma to correct for instrument mass bias. External standards (Ple?ovice and 91500 zircon, NIST SRM 610 and 612 silicate glasses and STDP5 phosphate glass) along with Kovdor apatite were analyzed to monitor U–Pb, Th–Pb, U–Th and Pb–Pb ratiosCommon Pb correction employed the ²⁰⁷Pb method, and also a ²⁰⁸Pb correction method for samples with low Th/U. The ²⁰⁷Pb and ²⁰⁸Pb corrections employed either the initial Pb isotopic composition or the Stacey and Kramers model and propagated conservative uncertainties in the initial Pb isotopic composition. Common Pb correction using the Stacey and Kramers (1975) model employed an initial Pb isotopic composition calculated from either the estimated U–Pb age of the sample or an iterative approach. The age difference between these two methods is typically less than 2%, suggesting that the iterative approach works well for samples where there are no constraints on the initial Pb composition, such as a detrital sample. No ²⁰⁴Pb correction was undertaken because of low ²⁰⁴Pb counts on single collector instruments and ²⁰⁴Pb interference by ²⁰⁴Hg in the argon gas supply.Age calculations employed between 11 and 33 analyses per sample and used a weighted average of the common Pb-corrected ages, a Tera–Wasserburg Concordia intercept age and a Tera–Wasserburg Concordia intercept age anchored through common Pb. The samples in general yield ages consistent (at the 2σ level) with independent estimates of the U–Pb apatite age, which demonstrates the suitability of the analytical protocol employed. Weighted mean age uncertainties are as low as 1–2% for U- and/or Th-rich Palaeozoic–Neoproterozoic samples; the uncertainty on the youngest sample, the Cenozoic (31.44 Ma) Durango apatite, ranges from 3.7–7.6% according to the common Pb correction method employed. The accurate and relatively precise common Pb-corrected ages demonstrate the U–Pb and Th–Pb apatite chronometers are suitable as sedimentary provenance tools. The Kovdor carbonatite apatite is recommended as a potential U–Pb and Th–Pb apatite standard as it yields precise and reproducible ²⁰⁷Pb-corrected, ²³²Th–²⁰⁸Pb, and common Pb-anchored Tera–Wasserburg Concordia intercept ages.     

A comparison between the fabric camera and texture goniometer methods of fabric analysis by X-ray diffraction

The effects of grain size on the analysis of fabrics by X-ray diffraction using both the fabric camera and the texture goniometer are discussed. Simple calculations show the interdependance between the mean grain diameter and the number of crystals which are measured by each instrument. The effects of both grain size and modal composition of the specimen are illustrated by comparative analyses. Both the fabric camera and texture goniometer are well suited to the analysis of specimens in which the mean grain diameter is between approximately 10 and 100 microns. The texture goniometer is more suitable when the grain size is less than this, while the fabric camera is better suited when the grain size is coarser, especially when the specimen is not monomineralic.     

Phosphorus oxynitride PON, a silica analogue: structure and compression of the cristobalite-like phase; P –T phase diagram

 The structure of the cristobalite-like polymorph of phosphorus oxynitride PON has been refined using neutron powder diffraction data. It is tetragonal, space group I&4macr;2d, Z=4. The four P–(O,N) distances are equal but the tetrahedron is compressed along c. In AX₂ or ABX₄ compounds, the tetragonal I&4macr;2d or I&4macr; structure is obtained when the average ratio of the cation to anion radius is below 1.186, whereas the tetragonal P4₁2₁2 or orthorhombic C222₁ structure is obtained at low temperatures for larger ratios. The cell parameters of this PON polymorph have been determined as a function of hydrostatic pressure by in situ angle dispersive X-ray powder diffraction in a diamond-anvil cell. Under truly hydrostatic pressure, a strong anisotropic behavior is observed with the c parameter being nearly incompressible. Very slight anisotropic stress strongly modifies the high-pressure behavior. According to the pressure-temperature conditions of treatment, three phases, cristobalite-, moganite-, and quartz-like, have been obtained by quenching experiments, and the P–T phase diagram of PON was derived. The high-pressure behavior of the α-quartz, moganite, and cristobalite-like polymorphs of PON and SiO₂ is discussed. Received: 7 August 2000 / Accepted: 21 January 2001     

Thermal evolution of an ancient subduction interface revealed by Lue Hf garnet geochronology,Halilba■? Complex(Anatolia)

The thermal structure of subduction zones exerts a major influence on deep-seated mechanical and chemical processes controlling arc magmatism, seismicity, and global element cycles. Accretionary complexes exposed inland may comprise tectonic blocks with contrasting pressureetemperature(Pe T)histories, making it possible to investigate the dynamics and thermal evolution of former subduction interfaces. With this aim, we present new Lue Hf geochronological results for mafic rocks of the Halilbag?Complex(Anatolia) that evolved along different thermal gradients. Samples include a lawsoniteeepidote blueschist, a lawsoniteeepidote eclogite, and an epidote eclogite(all with counter-clockwise Pe T paths),a prograde lawsonite blueschist with a "hairpin"-type Pe T path, and a garnet amphibolite from the overlying sub-ophiolitic metamorphic sole. Equilibrium phase diagrams suggest that the garnet amphibolite formed at w0.6 -0.7 GPa and 800 -850℃, whereas the prograde lawsonite blueschist records burial from 2.1 GPa and 420℃ to 2.6 GPa and 520℃. Well-defined Lue Hf isochrons were obtained for the epidote eclogite(92.38 ± 0.22 Ma) and the lawsoniteeepidote blueschist(90.19 ± 0.54 Ma),suggesting rapid garnet growth. The lawsoniteeepidote eclogite(87.30 ± 0.39 Ma) and the prograde lawsonite blueschist(ca. 86 Ma) are younger, whereas the garnet amphibolite(104.5 ± 3.5 Ma) is older.Our data reveal a consistent trend of progressively decreasing geothermal gradient from granulite-facies conditions at ~104 Ma to the epidote-eclogite facies around 92 Ma, and the lawsonite blueschist-facies between 90 Ma and 86 Ma. Three Lue Hf garnet dates(between 92 Ma and 87 Ma) weighted toward the growth of post-peak rims(as indicated by Lu distribution in garnet) suggest that the HP/LT rocks were exhumed continuously and not episodically. We infer that HP/LT metamorphic rocks within the Halilbag?Complex were subjected to continuous return flow, with "warm" rocks being exhumed during the tectonic burial of "cold" ones. Our results, combined with regional geological constraints, allow us to speculate that subduction started at a transform fault near a mid-oceanic spreading centre. Following its formation, this ancient subduction interface evolved thermally over more than 15 Myr, most likely as a result of heat dissipation rather than crustal underplating.     

Amphibole composition in tonalite as a function of pressure: an experimental calibration of the Al-in-hornblende barometer

The Al-in-hornblende barometer, which correlates Al^tot content of magmatic hornblende linearly with crystallization pressure of intrusion (Hammarstrom and Zen 1986), has been calibrated experimentally under water-saturated conditions at pressures of 2.5–13 kbar and temperatures of 700–655°C. Equilibration of the assemblage hornlende-biotite-plagioclase-orthoclasequartz-sphene-Fe-Ti-oxide-melt-vapor from a natural tonalite 15–20° above its wet solidus results in hornblende compositions which can be fit by the equation: P(±0.6 kbar) = –3.01 + 4.76 Al _hbl ^tot r ²=0.99, where Al^tot is the total Al content of hornblende in atoms per formula unit (apfu). Al^tot increase with pressure can be ascribed mainly to a tschermak-exchange ( ) accompanied by minor plagioclase-substitution ( ). This experimental calibration agrees well with empirical field calibrations, wherein pressures are estimated by contact-aureole barometry, confirming that contact-aureole pressures and pressures calculated by the Al-in-hornblende barometer are essentially identical. This calibration is also consistent with the previous experimental calibration by Johnson and Rutherford (1989b) which was accomplished at higher temperatures, stabilizing the required buffer assemblage by use of mixed H₂O-CO₂ fluids. The latter calibration yields higher Al^tot content in hornblendes at corresponding pressures, this can be ascribed to increased edenite-exchange ( ) at elevated temperatures. The comparison of both experimental calibrations shows the important influence of the fluid composition, which affects the solidus temperature, on equilibration of hornblende in the buffering phase assemblage.     

Use of annular flumes to determine the influence of current velocity and bivalves on material flux at the sediment-water interface

A benthic annular flume for both laboratory and in situ deployment on intertidal mudflats is described. The flume provides a means of quantifying material flux (i.e., biodeposition of suspended particulates, sediment resuspension, nutrients, oxygen, and contaminants) across the sediment-water interface in relation to changes in current velocity and benthic community structure and/or population density of key macrofauna species. Flume experiments have investigated the impact of the infaunal bivalveMacoma balthica and the epifaunal bivalveMytilus edulis on seston and sediment flux at the sediment-water interface. The bioturbatorMacoma was found to increase the sediment resuspension and/or erodability by 4-fold, at densities similar to those recorded at the Skeffling mudflat (Humber estuary) (i.e., >1000 individuals m^?2). There was a significant correlation between sediment resuspension andMacoma density (r=0.99; p<0.001), which supported previous in situ field observations indicating bioturbation byMacoma enhanced sediment erodability. Biodeposition rates (g m^?2 h¹) ofMytilus edulis andCerastoderma edule were quantified and related to changes in population density in a mussel bed (Cleethorpes, Humber estuary). Biodeposition rates were up to 40-times the natural sedimentation rates. At the highest mussel bed densities (i.e., 50–100% cover or >1400 mussels m^?2) the physical presence of this epifaunal bivalve on the sediment surface reduced erosion by 10-fold. The shift from net biodeposition to net erosion occurred at current velocities of 20–25 cm s^?1. These results demonstrate that infaunal and epifaunal bivalves can have a significant impact on seston flux or sediment deposition and on sediment resuspension or erodability in estuaries where there are extensive mudflats.     

North Atlantic climate impact on early late‐glacial climate oscillations in the south‐eastern Alps inferred from a multi‐proxy lake sediment record

High‐resolution multi‐proxy analyses of a sediment core section from Lake Jeserzersee (Saissersee) in the piedmont lobe of the Würmian Drau glacier (Carinthia, Austria) reveal pronounced climatic oscillations during the early late glacial (ca. 18.5–16.0k cal a BP). Diatom‐inferred epilimnetic summer water temperatures show a close correspondence with temperature reconstructions from the adjacent Lake Längsee record and, on a hemispheric scale, with fluctuations of ice‐rafted debris in the North Atlantic. This suggests that North Atlantic climate triggered summer climate variability in the Alps during the early late glacial. The expansion of pine (mainly dwarf pine) between ca. 18.5 and 18.1k cal a BP indicates warming during the so‐called ‘Längsee oscillation’. The subsequent stepwise climate deterioration between ca. 18.1 and 17.6k cal a BP culminated in a tripartite cold period between ca. 17.6 and 16.9k cal a BP with diatom‐inferred summer water temperatures 8.5–10 °C below modern values and a shift from wet to dry conditions. This period probably coincides with a major Alpine glacier advance termed the Gschnitz stadial. A warmer interval between ca. 16.9 and 16.4k cal a BP separates this cold phase from a second, shorter and less pronounced cold phase between ca. 16.4 and 16.0k cal a BP, which is thought to correlate with the Clavadel/Senders glacier advance in the Alps. The following temperature increase, coupled with wet (probably snow‐rich) conditions, caused the expansion of birch during the transition period to the late glacial interstadial. Copyright © 2011 John Wiley & Sons, Ltd.