Synclinal-horst basins: examples from the southern Rio Grande rift and southern transition zone of southwestern New Mexico, USA

In areas of broadly distributed extensional strain, the back‐tilted edges of a wider than normal horst block may create a synclinal‐horst basin. Three Neogene synclinal‐horst basins are described from the southern Rio Grande rift and southern Transition Zone of southwestern New Mexico, USA. The late Miocene–Quaternary Uvas Valley basin developed between two fault blocks that dip 6–8° toward one another. Containing a maximum of 200 m of sediment, the Uvas Valley basin has a nearly symmetrical distribution of sediment thickness and appears to have been hydrologically closed throughout its history. The Miocene Gila Wilderness synclinal‐horst basin is bordered on three sides by gently tilted (10°, 15°, 20°) fault blocks. Despite evidence of an axial drainage that may have exited the northern edge of the basin, 200–300 m of sediment accumulated in the basin, probably as a result of high sediment yields from the large, high‐relief catchments. The Jornada del Muerto synclinal‐horst basin is positioned between the east‐tilted Caballo and west‐tilted San Andres fault blocks. Despite uplift and probable tilting of the adjacent fault blocks in the latest Oligocene and Miocene time, sediment was transported off the horst and deposited in an adjacent basin to the south. Sediment only began to accumulate in the Jornada del Muerto basin in Pliocene and Quaternary time, when an east‐dipping normal fault along the axis of the syncline created a small half graben. Overall, synclinal‐horst basins are rare, because horsts wide enough to develop broad synclines are uncommon in extensional terrains. Synclinal‐horst basins may be most common along the margins of extensional terrains, where thicker, colder crust results in wider fault spacing.     

The BEAM-project: prediction and assessment of mixture toxicities in the aquatic environment

Freshwater and marine ecosystems are exposed to various multi-component mixtures of pollutants. Nevertheless, most ecotoxicological research and chemicals regulation focus on hazard and exposure assessment of individual substances only, the problem of chemical mixtures in the environment is ignored to a large extent. In contrast, the assessment of combination effects has a long tradition in pharmacology, where mixtures of chemicals are specifically designed to develop new products, e.g. human and veterinary drugs or agricultural and non-agricultural pesticides. In this area, two concepts are frequently used and are thought to describe fundamental relationships between single substance and mixture effects: Independent Action (Response Addition) and Concentration Addition. The question, to what extent these concepts may also be applied in an ecotoxicological and regulatory context may be considered a research topic of major importance, as the concepts would allow to make use of already existing single substance toxicity data for the predictive assessment of mixture toxicities. Two critical knowledge gaps are identified: (a) There is a lack of environmental realism, as a huge part of our current knowledge about the applicability of the concepts is restricted to artificial situations with respect to mixture composition or biological effect assessment. (b) The knowledge on what exactly is needed for using the concepts as tools for the predictive mixture toxicity assessment is insufficient. Both gaps seriously hamper the necessary, scientifically sound consideration of mixture toxicities in a regulatory context.In this paper, the two concepts will be briefly introduced, the necessity of considering the toxicities of chemical mixtures in the environment will be demonstrated and the applicability of Independent Action and Concentration Addition as tools for the prediction and assessment of mixture toxicities will be discussed. An overview of the specific aims and approaches of the BEAM project to fill in the identified knowledge gaps is given and first results are outlined.     

Weather as a Chronic Hazard for Road Transportation in Canadian Cities

Inclement weather creates a chronic hazard for Canadian travellers. Past studies indicate that road collision rates increase during precipitation, although the magnitude of theincrease varies from study to study, partly as a result of variations in weather and driving conditions,but also because of differences in methods. The goal of the current study is to improve ourunderstanding of the links between weather and travel risk in mid-sized Canadian cities by using astandardized method for analyzing data from six cities with different climates: Halifax-Dartmouth,Ottawa, Québec, Hamilton, Waterloo Region, and Regina. The study has four interrelated objectives: (1) Toconduct a sensitivity analysis to determine the extent to which risk estimates vary depending onthe criteria used to define precipitation events and `normal' conditions; (2) To compare therelative risk of collision and injury during precipitation relative to `normal' conditions; (3) Todetermine the extent to which weather-related risks vary fordifferent Canadian cities; and (4) To explore any differences in collision characteristics between events and controls, especially as theyvary from city to city. Results are based on a matched-pair analysis, using six-hour time blocks over afour-year period, 1995 to 1998. Results indicate only modest sensitivity to the criteria used to define precipitation events and `normal' conditions. On average, precipitation is associated with a 75 percentincrease in traffic collisions and a 45 percent increase in related injuries, as compared to `normal'seasonal conditions, but risk levels vary depending on the characteristics of the weather event.Both sensitivity to specific weather conditions and weather-related accident profiles vary from city tocity in ways that are not easily explained.     

Fluxes of Sr into the headwaters of the Ganges

Himalayan weathering is recognized as an important agent in modifying sea water chemistry, but there are significant uncertainties in our understanding of Himalayan riverine fluxes. This paper examines causes of the variability, including that of the seasons, by analysis of downstream variations in Sr, ⁸⁷Sr, and major ions in the mainstream, in relation to the composition of tributary streams from subcatchments with differing geologic substrates.Water samples were collected over four periods spanning the premonsoon, monsoon, and postmonsoon seasons. Uncertainties in the relative fluxes have been estimated, using Monte Carlo techniques, from the short-term variability of mainstream chemistry and the scatter of tributary compositions. The results show marked seasonal variations in the relative inputs related to high monsoon rainfall in the High and Lesser Himalaya, contrasting with the major contribution from glacial melt waters from the Tibetan Sedimentary Series (TSS) at times of low rainfall. Much of the spread in previously published estimates of the sources of Sr in Himalayan rivers may result from these seasonal variations in Sr fluxes.The annual fluxes of Sr into the headwaters of the Ganges are derived from the three main tectonic units in the proportions 35 ± 1% from the TSS, 27 ± 3% from the High Himalayan Crystalline Series (HHCS), and 38 ± 8% from the Lesser Himalaya. The particularly elevated ⁸⁷Sr/⁸⁶Sr ratios characteristic of the HHCS and the Lesser Himalaya enhance their influence on seawater Sr-isotope composition. The TSS contributes 13 ± 1%, the HHCS 30 ± 3%, and the Lesser Himalaya 57 ± 11% of the ⁸⁷Sr flux in excess of the seawater ⁸⁷Sr/⁸⁶Sr ratio of 0.709.     

Redetermination of the transformation enthalpies of the xanthoconite–proustite, pyrostilpnite–pyrargyrite and trechmannite–smithite phase transitions

 We report here refined values of the transformation enthalpy for xanthoconite to proustite (54.81 kJ/mol) and pyrostilpnite to pyrargyrite (40.32 kJ/mol). Additionally, the enthalpy for the transformation of trechmannite to smithite (5.82 kJ/mol) has been determined. The refinement was possible by taking into account a previously unknown dependence of electrochemical signals on the amount of substance undergoing the reduction process. Received December 21, 1995/Revised, accepted June 29, 1996     

Wide-angle seismic velocities in heterogeneous crust

Seismic velocities measured by wide-angle surveys are commonly used to constrain material composition in the deep crust. Therefore, it is important to understand how these velocities are affected by the presence of multiscale heterogeneities. The effects may be characterised by the scale of the heterogeneity relative to the dominant seismic wavelength (λ); what is clear is that heterogeneities of all scales and strengths bias wide-angle velocities to some degree. Waveform modelling was used to investigate the apparent wide-angle P -wave velocities of different heterogeneous lower crusts. A constant composition (50 per cent felsic and 50 per cent ultramafic) was formed into a variety of 1- and 2-D heterogeneous arrangements and the resulting wide-angle seismic velocity was estimated. Elastic, 1-D models produced the largest velocity shift relative to the true average velocity of the medium (which is the velocity of an isotropic mixture of the two components). Thick (width > λ) horizontal layers, as a result of Fermat's Principle, provided the largest increase in velocity; thin (width ≪λ) vertical layers produced the largest decrease in velocity. Acoustic 2-D algorithms were shown to be inadequate for modelling the kinematics of waves in bodies with multiscale heterogeneities. Elastic, 2-D modelling found velocity shifts (both positive and negative) that were of a smaller magnitude than those produced by 1-D models. The key to the magnitude of the velocity shift appears to be the connectivity of the fast (and/or slow) components. Thus, the models with the highest apparent levels of connectivity between the fast phases, the 1-D layers, produced the highest-magnitude velocity shifts. To understand the relationship between measured seismic velocities and petrology in the deep crust it is clear that high-resolution structural information (which describes such connectivity) must be included in any modelling.     

Finding work in 2001: urban–rural contrasts across England in employment rates and local job availability

Early results from the 2001 census of England allow a preliminary analysis of joblessness. People in the prime working ages (25–49) are more likely to be in work than those in their 50s, but the differences are quite subtle: in particular, men without qualifications are not much more likely to be in work when they are younger, despite the suggestions that too many men cease working in their 50s. The evidence supports the view that there is a national shortfall of demand for labour, that the low-skilled are the least able to compete for scarce jobs, and older people are the most likely to be unqualified. Moreover there is a strong spatial clustering of areas where job availability has declined or grown least, undermining the government's claim that there were often available jobs near to concentrations of people without work.