The effect of crystallization on the rheology and dynamics of lava flows

The dynamics of a lava flow is studied by a two-dimensional model describing a viscous fluid with Bingham rheology, flowing down a slope. The temperature in the flow is calculated assuming that heat is transferred through the plug by conduction and is lost by radiation to the atmosphere at the top of the flow. Taken into account is that the increasing crystallization takes place in the flow as a consequence of cooling. The lava viscosity and yield stress are expressed as a function of crystallization degree as well as of temperature: in particular it is assumed that yield stress reaches a maximum value above the solidus temperature, according to experimental data. Dynamical variables, such as velocity and thickness of the flow, are calculated for different values of the maximum crystallization degree and the flow rate. The model shows how the lava flow dynamics is affected by cooling and crystallization. The cooling of the flow is controlled by the increase of yield stress, which produces a thicker plug and makes the heat loss slower. The increasing crystallization has two opposing effects on viscosity: it produces an increase of viscosity, but at the same time produces an increase of yield stress and hence reduces the heat loss and keeps the internal temperature high. As a consequence, lava flows are significantly affected by the dependence of yield stress on temperature and scarcely by the maximum crystallization degree.     

Can flat-ramp-flat fault geometry be inferred from fold shape?: A comparison of kinematic and mechanical folds

The inference of fault geometry from suprajacent fold shape relies on consistent and verified forward models of fault-cored folds, e.g. suites of models with differing fault boundary conditions demonstrate the range of possible folding. Results of kinematic (fault-parallel flow) and mechanical (boundary element method) models are compared to ascertain differences in the way the two methods simulate flexure associated with slip along flat-ramp-flat geometry. These differences are assessed by systematically altering fault parameters in each model and observing subsequent changes in the suprajacent fold shapes. Differences between the kinematic and mechanical fault-fold relationships highlight the differences between the methods. Additionally, a laboratory fold is simulated to determine which method might best predict fault parameters from fold shape. Although kinematic folds do not fully capture the three-dimensional nature of geologic folds, mechanical models have non-unique fold-fault relationships. Predicting fault geometry from fold shape is best accomplished by a combination of the two methods.     

Long‐term sediment yield from a small catchment in southern Brazil affected by land use and soil management changes

Sediments produced from eroding cultivated land can cause on‐site and off‐site effects that cause considerable economic and social impacts. Despite the importance of soil conservation practices (SCP) for the control of soil erosion and improvements in soil hydrological functions, limited information is available regarding the effects of SCP on sediment yield (SY) at the catchment scale. This study aimed to investigate the long‐term relationships between SY and land use, soil management, and rainfall in a small catchment. To determine the effects of anthropogenic and climatic factors on SY, rainfall, streamflow, and suspended sediment concentration were monitored at 10‐min intervals for 14 years (2002–2016), and the land use and soil management changes were surveyed annually. Using a statistical procedure to separate the SY effects of climate, land use, and soil management, we observed pronounced temporal effects of land use and soil management changes on SY. During the first 2 years (2002–2004), the land was predominantly cultivated with tobacco under a traditional tillage system (no cover crops and ploughed soil) using animal traction. In that period, the SY reached approximately 400 t·km^?2·year^?1. From 2005 to 2009, a soil conservation programme introduced conservation tillage and winter cover crops in the catchment area, which lowered the SY to 50 t·km^?2·year^?1. In the final period (2010–2016), the SCP were partially abandoned by farmers, and reforested areas increased, resulting in an SY of 150 t·km^?2·year^?1. This study also discusses the factors associated with the failure to continue using SCP, including structural support and farmer attitudes.     

Late Pleistocene vertebrate-bearing deposits at San Teodoro Cave (North-Eastern Sicily): Preliminary data on faunal diversification and chronology

This paper deals with the chronology and the possible correlations among levels of different excavated areas in the Pleistocene vertebrate-bearing deposits at the large San Teodoro Cave (North-Eastern Sicily). Two trenches have been excavated along the eastern side of the cave, located at a distance from the entrance, respectively, of 8 m (α trench) and 28 m (β trench) and at different depths. Lithological features, biometrical data from small mammals and ecological data from molluscs point to similar environmental conditions for the α trench deposits and those located along the eastern wall of the cave in the eastern part of the β trench. The same evidence, and the taphonomic features of large mammals, points to different environmental conditions and perhaps to different ages for the deposits located in the western part of the β trench. The survival of elephants in Sicily up to 32,000 years ago is a new significant result of the ²³⁰Th/²³⁴U dating carried out from a concretionary stratum from the β trench and represents the youngest elephant survival in the western Mediterranean islands.     

Response of BITS (a benthic index based on taxonomic sufficiency) to water and sedimentary variables and comparison with other indices in three Adriatic lagoons

The European Water Framework Directive (WFD, 2000/60/EC) recommends the development of biotic indices for assessing the ecological quality status of water bodies. The Benthic Index based on Taxonomic Sufficiency (BITS) was specifically developed for lagoonal systems, according to the tolerant/opportunistic approach. Macrobenthic data, variables indicative of eutrophication and variables indicative of sedimentary organic matter quality were collected during 18 surveys carried out between 2004 and 2005 in three Adriatic coastal lagoons (Venice Lagoon, Sacca di Goro, Lesina Lagoon). The relationship between environmental variables and biotic indices (AMBI, BENTIX, BITS, BOPA and FINE) was tested using multivariate analyses. Indices based on species classification level appeared to relate better with the variables describing organic matter quality, whereas BITS, which is based on family classification level, seemed related to eutrophication indicative variables, such as sulphide, ammonium, dissolved oxygen and orthophosphate concentrations. The BITS approach reduces the costs associated with sorting and identification of organisms. Providing a rapid assessment of ecological quality, and producing an ecologically relevant classification, BITS seems a promising tool for monitoring programs of Adriatic lagoonal ecosystems. Its sensitivity in reflecting the field conditions elsewhere, however, remains to be assessed.     

A Completely 3D Model for the Simulation of Mechanized Tunnel Excavation

For long deep tunnels as currently under construction through the Alps, mechanized excavation using tunnel boring machines (TBMs) contributes significantly to savings in construction time and costs. Questions are, however, posed due to the severe ground conditions which are in cases anticipated or encountered along the main tunnel alignment. A major geological hazard is the squeezing of weak rocks, but also brittle failure can represent a significant problem. For the design of mechanized tunnelling in such conditions, the complex interaction between the rock mass, the tunnel machine, its system components, and the tunnel support need to be analysed in detail and this can be carried out by three-dimensional (3D) models including all these components. However, the state-of-the-art shows that very few fully 3D models for mechanical deep tunnel excavation in rock have been developed so far. A completely three-dimensional simulator of mechanised tunnel excavation is presented in this paper. The TBM of reference is a technologically advanced double shield TBM designed to cope with both conditions. Design analyses with reference to spalling hazard along the Brenner and squeezing along the Lyon–Turin Base Tunnel are discussed.     

A note on climate change adaptation for seaports: a challenge for global ports, a challenge for global society

With 80 % of world trade carried by sea, seaports provide crucial linkages in global supply-chains and are essential for the ability of all countries to access global markets. Seaports are likely to be affected directly and indirectly by climatic changes, with broader implications for international trade and development. Due to their coastal location, seaports are particularly vulnerable to extreme weather events associated with increasing sea levels and tropical storm activity, as illustrated by hurricane “Sandy”. In view of their strategic role as part of the globalized trading system, adapting ports in different parts of the world to the impacts of climate change is of considerable importance. Reflecting the views of a diverse group of stakeholders with expertise in climate science, engineering, economics, policy, and port management, this essay highlights the climate change challenge for ports and suggests a way forward through the adoption of some initial measures. These include both “soft” and “hard” adaptations that may be spearheaded by individual port entities, but will require collaboration and support from a broad range of public and private sector stakeholders and from society at large. In particular, the essay highlights a need to shift to more holistic planning, investment and operation.     

Did the “Autochthonous” European foreland of Corsica Island (France) experience Alpine subduction?

Despite the important role played by the Sardinia‐Corsica block in the reconstruction of the Western Mediterranean geodynamics, the extent of involvement of the “Autochthonous” European margin exposed in Corsica (France) (i.e., Hercynian Corsica) in the Alpine orogeny remains uncertain. Stratigraphic and sedimentological studies in the post‐Variscan deposits on the Hercynian Corsica are scarce and even scarcer are the structural and metamorphic constraints. To face these uncertainties, we present new stratigraphic, structural and metamorphic data from the area of Razzo Bianco, Central Corsica, where a complete sequence belonging to the European continental margin is exposed. Field and structural investigations demonstrate that the sequence represents the easternmost edge of the downgoing European plate. Metamorphic studies on the Eocene deposits indicate that the margin was buried at depth up to blueschist facies conditions and, subsequently, it was progressively exhumed mainly through the activation of oblique top‐to‐the NW shear zones.