Accumulation in Svalbard glaciers deduced from ice cores with nuclear tests and Chernobyl reference layers

Mean net annual balance and the related spatio-temporal variations have been determined on the basis of well-dated artificial layers in shallow ice cores (Chernobyl, 1986, and atmospheric thermonuclear tests, mainly in 1961-62 in Novaya Zemlya). Seventy ice cores from 13 Svalbard glaciers have been analysed. On each glacier, in its accumulation area and at the highest elevation, one ice core was recovered down to about 40 m and sampled for radioactivity measurements to determine the 1986 and 1962-63 layer (1954 was the initial date of the nuclear tests). For each glacier, at least five complementary ice cores from the accumulation area were analysed to determine the Chernobyl reference layer. Six ice cores exhibit both the Chernobyl and nuclear tests layers and are of special interest in this study.
This work provides new data on the deposition rates of natural and artificial radioisotopes. Using ice cores samples from the Arctic glaciers, even with superimposed ice accumulation, it is possible to distinguish between the Chernobyl and the nuclear tests fallouts. This work also shows that the mean annual net balance did not significantly change for at least five ice core locations in the Svalbard glaciers for the two periods extending from 1963 to 1986 to the recent date of drilling.     

Numerical simulation of the propagation of P waves in fractured media

We study the propagation of P waves through media containing open fractures by performing numerical simulations. The important parameter in such problems is the ratio between crack length and incident wavelength. When the wavelength of the incident wavefield is close to or shorter than the crack length, the scattered waves are efficiently excited and the attenuation of the primary waves can be observed on synthetic seismograms. On the other hand, when the incident wavelength is greater than the crack length, we can simulate the anisotropic behaviour of fractured media resulting from the scattering of seismic waves by the cracks through the time delay of the arrival of the transmitted wave. The method of calculation used is a boundary element method in which the Green's functions are computed by the discrete wavenumber method. For simplicity, the 2-D elastodynamic diffraction problem is considered. The rock matrix is supposed to be elastic, isotropic and homogeneous, while the cracks are all empty and have the same length and strike direction. An iterative method of calculation of the diffracted wavefield is developed in the case where a large number of cracks are present in order to reduce the computation time. The attenuation factor Q ⁻¹ of the direct waves passing through a fractured zone is measured in several frequency bands. We observe that the attenuation factor Q ⁻¹ of the direct P wave peaks around kd = 2, where k is the incident wavenumber and d the crack length, and decreases proportionally to ( kd ) ⁻¹ in the high-wavenumber range. In the long-wavelength domain, the velocity of the direct P wave measured for two different crack realizations is very close to the value predicted by Hudson's theory on the overall elastic properties of fractured materials.     

Deep crustal structure and rheology of the Gascoyne volcanic margin,western Australia

Interpretation of deep seismic reflection data across the Gascoyne Margin reveals six distinct seismic facies units related to the tectono-magmatic breakup history. On the outer Exmouth Plateau four large scale units are identified: (1) an extensively block-faulted upper crust; (2) a middle-crustal unit of discontinuous, undulatory reflectors; (3) a reflection-free deep crustal unit; and (4) a lower-crustal band of low-frequency, high-amplitude reflectors. Two additional units are found near the continent-ocean boundary (COB); (5) seaward-dipping reflectors (SDR); and (6) landward-dipping reflectors in the lower crust below the SDR. The lower-crustal high-reflectivity band, located near the top of a high-velocity unit (V_p > 7 kms^–1), is interpreted as magmatic underplating. There is a spatial correlation between the underplated area and the presence of extensive upper-crustal block-faulting and intrusive rocks in the shallow crust. The undulatory middle-crustal reflector unit is also only identified in the outer plateau area, and is interpreted as a zone in which the upper-crustal faults terminate. The inner parts of the margin consist of a deep basin showing little upper-crustal faulting and no evidence of middle crustal deformation or underplating. Theoretical modeling of the effect of rifting and magmatic underplating on crustal strength profiles suggests that the brittle-ductile transition may migrate at least 5 km upwards during several million years after the underplating event. Based on the seismic interpretation and crustal strength modeling we propose that the seismic structure of the outer Exmouth Plateau is severely modified by a transient change in the crustal rheological structure associated with magmatic underplating.     

Biokinetics of Radiocobalt in the Asteroid Asterias rubens (Echinodermata): Sea Water and Food Exposures

Uptake and loss of cobalt-57 were investigated in the starfish Asterias rubens, in order to assess its value as a sentinel organism for nearshore radionuclide contamination. Whole-body uptake from sea water was linear over a 32-day exposure period and reached wet weight concentration factor (CF) of 23 ± 5. Bioaccumulation of ⁵⁷Co was dependent upon body compartment, the aboral part of the body wall concentrating cobalt to the greatest degree (wet weight CF: 77 ± 16). After restoration of uncontaminated conditions, radiocobalt was released following an exponential loss kinetics characterized by a biological half-life (T_b1/2) of 27 ± 6 day. Dietary radiocobalt (taken up during a short-term feeding for 24 h on radiolabelled mussels) showed a much more rapid turnover time (T_b1/2: 14 ± 4 d), suggesting that A. rubens accumulates this radionuclide predominantly from sea water. A. rubens, and more particularly the aboral part of its body wall, would readily reveal the presence of an environmental contamination by radiocobalt and could preserve this information over a period of few months.     

Measuring and interpreting heat fluxes from shallow volcanic bodies using vertical temperature profiles: a preliminary test

 To test the potential of heat flux prospecting in active volcanic areas using shallow temperature data taken along vertical profiles, we carried out two thermal profile surveys, one not far from Yasur cone on Tanna Island, and another inside the caldera of Ambrym (New Hebrides arc, southwestern Pacific). The basic steady heat flux of internal volcanic origin was determined, taking into account both conductive and convective heat transfers. At both locations there exists, over small distances, significant differences in the heat flux. These differences correspond to shallow sources of heat. The use of a network of vertical profiles allowed: (a) heat flux mapping; (b) location of shallow volcanic heat sources; and (c) observation of the detailed structure of the heat release at quiescent but active volcanoes. Received: 18 July 1997 / Accepted: 13 May 1998     

Visual characterization technique for gravel‐cobble river bed surface sediments; validation and environmental applications Contribution to the programme of CIRSA (Centre Interuniversitaire de Recherche sur le Saumon Atlantique)

This paper presents an evaluation of the feasibility and the reliability of a visual characterization technique for gravel–cobble river bed surface substrate. Based on principal axis regressions, using phi scale (ϕ), comparisons of visual estimation and grid sampling techniques show that useful predictive relations (R² = 0·78–0·88) exist between visual estimates of the surface d₁₆, d₅₀ and d₈₄ and estimates obtained for the same percentiles with the grid sampling technique. Comparisons of visual estimation and the surface‐bulk sampling technique also indicate a predictive relation (R² = 0·70) between the d₅₀ of the two methods. Trained operators can visually estimate gravel–cobble bed surface d₁₆ to uncertainties of 41 per cent, d₅₀ to 15 per cent and d₈₄ to 11 per cent (for example, there is a 5·5 mm error on a d₈₄ size of 50 mm). Furthermore, evidence shows that if operators are properly trained, a calibration relation for each percentile can be applied independently of operators. This visual characterization allows effective detailed mapping of spatial patterns in substrate size distribution along extensive reaches of gravel‐bed rivers. The technique can be very useful in creating terrain models for various geomorphological, hydrological and biological applications such as the determination of entrainment thresholds, hydraulic roughness and substrate suitability for benthic insects or salmonid habitat. Copyright © 2001 John Wiley & Sons, Ltd.     

Embryo dune development drivers: beach morphology,growing season precipitation,and storms

For development of embryo dunes on the highly dynamic land–sea boundary, summer growth and the absence of winter erosion are essential. Other than that, however, we know little about the specific conditions that favour embryo dune development. This study explores the boundary conditions for early dune development to enable better predictions of natural dune expansion. Using a 30 year time series of aerial photographs of 33 sites along the Dutch coast, we assessed the influence of beach morphology (beach width and tidal range), meteorological conditions (storm characteristics, wind speed, growing season precipitation, and temperature), and sand nourishment on early dune development. We examined the presence and area of embryo dunes in relation to beach width and tidal range, and compared changes in embryo dune area to meteorological conditions and whether sand nourishment had been applied. We found that the presence and area of embryo dunes increased with increasing beach width. Over time, embryo dune area was negatively correlated with storm intensity and frequency. Embryo dune area was positively correlated with precipitation in the growing season and sand nourishment. Embryo dune area increased in periods of low storm frequency and in wet summers, and decreased in periods of high storm frequency or intensity. We conclude that beach morphology is highly influential in determining the potential for new dune development, and wide beaches enable development of larger embryo dune fields. Sand nourishment stimulates dune development by increasing beach width. Finally, weather conditions and non‐interrupted sequences of years without high‐intensity storms determine whether progressive dune development will take place. Copyright © 2017 John Wiley & Sons, Ltd.     

Analytical investigation of bidirectional ductile diaphragms in multi-span bridges

In the AASHTO Guide Specifications for Seismic Bridge Design Provisions,ductile diaphragms are identified as Permissible Earthquake-Resisting Elements(EREs),designed to help resist seismic loads applied in the transverse direction of bridges.When adding longitudinal ductile diaphragms,a bidirectional ductile diaphragm system is created that can address seismic excitations acting along both the bridge’s longitudinal and transverse axes.This paper investigates bidirectional ductile diaphragms with Buckling Restrained Braces(BRBs)in straight multi-span bridge with simply supported floating spans.The flexibility of the substructures in the transverse and longitudinal direction of the bridge is considered.Design procedures for the bidirectional ductile diaphragms are first proposed.An analytical model of the example bridge with bidirectional ductile diaphragms,designed based on the proposed methodology,is then built in SAP2000.Pushover and nonlinear time history analyses are performed on the bridge model,and corresponding results are presented.The effect of changing the longitudinal stiffness of the bidirectional ductile diaphragms in the end spans connecting to the abutment is also investigated,in order to better understand the impact on the bridge’s dynamic performance.     

Deriving fragility functions from bilinearized capacity curves for earthquake scenario modelling using the conditional spectrum

The development of fragility curves to perform seismic scenario-based risk assessment requires a fully probabilistic procedure in order to account for uncertainties at each step of the computation. This is especially true when developing fragility curves conditional on an Intensity Measure that is directly available from a ground-motion prediction equation. In this study, we propose a new derivation method that uses realistic spectra instead of design spectral shapes or uniform hazard spectra and allows one to easily account for the features of the site-specific hazard that influences the fragility, without using non-linear dynamic analysis. The proposed method has been applied to typical school building types in the city of Basel (Switzerland) and the results have been compared to the standard practice in Europe. The results confirm that fragility curves are scenario dependent and are particularly sensitive to the magnitude of the earthquake scenario. The same background theory used for the derivation of the fragility curves has allowed an innovative method to be proposed for the conversion of fragility curves to a common IM (i.e. spectral acceleration or PGA). This conversion is the only way direct comparisons of fragility curves can be made and is useful when inter-period correlation cannot be used in scenario loss assessment. Moreover, such conversion is necessary to compare and verify newly developed curves against those from previous studies. Conversion to macroseismic intensity is also relevant for the comparison between mechanical-based and empirical fragility curves, in order to detect possible biases.     

Determination of Radiogenic 87Sr/86Sr and Stable δ88/86SrSRM987 Isotope Values of Thirteen Mineral,Vegetal and Animal Reference Materials by DS‐TIMS

This work presents new ⁸⁷Sr/⁸⁶Sr and δ^88/86Sr_SRM987 isotopic values of thirteen mineral, vegetal and animal reference materials. Except for UB‐N, all our results are consistent with previously published data. Our results highlight intermediate precisions among the best presently published and a non‐significant systematic shift with the calculated δ^88/86Sr_SRM987 mean values for the three most analysed reference materials in the literature (i.e., IAPSO, BCR‐2 and JCp‐1). By comparison with the literature and between two distinct digestions, a significant bias of δ^88/86Sr_SRM987 values was highlighted for two reference materials (UB‐N and GS‐N). It has also been shown that digestion protocols (nitric and multi‐acid) have a moderate impact on the δ^88/86Sr_SRM987 isotopic values for the Jls‐1 reference materials suggesting that a nitric acid digestion of carbonate can be used without significant bias from partial digestion of non‐carbonate impurities. Different δ^88/86Sr_SRM987 values were measured after two independent Sr/matrix separations, according to the same protocol, for a fat‐rich organic reference material (BCR‐380R) and have been related to a potential post‐digestion heterogeneity. Finally, the δ^88/86Sr_SRM987 value differences measured between animal‐vegetal and between coral‐seawater reference materials agree with the previously published results, highlighting an Sr isotopic fractionation along the trophic chain and during carbonate precipitation.