Quantum-thermodynamic treatment of intrinsic anharmonicity; Wallace’s theorem revisited

Wallace (in Thermodynamics of crystals, 1972) developed a theorem, rooted in rigid lattice dynamics, which incorporates intrinsic anharmonic effects in solids. The practical application of this theorem in mineral physics is computationally involved and this is the main reason for the theorem not getting the attention it deserves. Because intrinsic anharmonicity is an important issue at the extreme conditions in planetary mantles, we derived a method which removes the computational obstacles in applying this theorem. We extended the theorem to incorporate details of the phonon spectrum and tested our algorithm on forsterite (Mg₂SiO₄). Using a least squares inversion technique applied to all available experimental data, we show that it results in an accurate representation of thermodynamic properties and sound wave velocities of Mg₂SiO₄ in its complete pressure–temperature stability range. We also show that the accuracy of our results is not significantly affected by the use of a different equation of state.     

The Globalization of a Panethnopolis: Richmond District as the New Chinatown in San Francisco

This paper briefly reviews the sociological literature on the “New” Chinatown phenomenon stressing its structural location vis-à-vis the “Old” Chinatown and the homeland. It defines the New Chinatown as a panethnopolis, that is a global neighborhood with a majority population of Chinese immigrants and of other ethnic groups of mostly Asian descent. It analyzes more particularly the formation, development, and integration of San Francisco’s Richmond District’s New Chinatown into both the city where it is located and the network of transglobal sites to which it belongs. It provides an interpretation of the New Chinatown as a cultural enclave within the context of globalization theory.     

Nouvelles données pour l’histoire des fluctuations holocènes du niveau du lac de Neuchatel (Suisse): la séquence sédimentaire de Marin-Les Piécettes

Resume. Les fouilles archéologiques réalisées de 1998 à 2002 sur le site néolithique de Marin-Les Piécettes sur la rive nord-ouest du lac de Neuchatel ont offert l’opportunité d’observer deux séquences sédimentaires intéressantes pour la reconstitution des variations holocènes du niveau du lac, en particulier au cours de la période correspondant au changement de cours de l’Aar en direction du nord-est, vers 5650–5500 cal BP. La géométrie des corps sédimentaires et les changements lithologiques permettent de reconna?tre plusieurs phases majeures de bas niveaux relatifs du plan d’eau vers 6870, 5660, 5060–3990, 3580, 2280, 1640 et 1170 cal BP. Le site néolithique de Marin-Les Piécettes s’est développé vers 5454–5433 cal BP à la faveur d’un court épisode de bas niveau du lac qui a interrompu une importante phase de haut niveau au début du Subboréal. Les événements paléohydrologiques identifiés à Marin-Les Piécettes apparaissent cohérents avec ceux reconstitués sur le site de Montilier au bord du lac de Morat, ainsi qu’avec les variations paléohydrologiques reconstituées à partir des lacs du Jura, du Plateau suisse et des Préalpes du Nord fran?aises. Ceci suggère qu’ils témoignent d’un signal climatique. La séquence sédimentaire de Marin-Les Piécettes met enfin en évidence la formation d’un cordon littoral sur la rive nord-ouest du lac juste après 5660 cal BP. Manuscrit re?u le 22 septembre 2004 Révision acceptée le 11 mars 2005     

Proximal and distal styles of pegmatite-related metasomatic emerald mineralization at Ianapera,southern Madagascar

The Ianapera emerald deposit is located in the Neoproterozoic Vohibory Block of southern Madagascar. The local geology consists of intercalated migmatitic gneissic units and calcareous metasedimentary rocks, containing boudinaged metamorphosed mafic/ultramafic lenses, all intruded by pegmatite veins. These units occur near the hinge of the tightly folded Ianapera antiform, within a few kilometers of the Ampanihy shear zone. Emerald mineralization is hosted by metasomatic phlogopite veins, and bodies developed within the mafic/ultramafic rocks. Based on field and textural relationships, we distinguish proximal and distal styles of mineralization. Proximal mineralization occurs at the contact of pegmatite veins with mafic/ultramafic units; in the distal style, pegmatites are not observed. Three types of emeralds could be distinguished, mainly on the basis of color and mineral zoning. Some of these emeralds have the most Al-depleted and Cr-rich composition ever recorded. Another characteristic feature to the Ianapera deposit and, to our knowledge, yet unreported, is the association of some emeralds with scapolite in metasomatised mafic rocks. Mineral inclusions are common in most emeralds and include phlogopite, carbonates, barite, K-feldspar, quartz, pyrite, zircon, monazite, bastnaesite, phenakite, plus Fe and Cr oxides. However, feldspar and rare earth element-bearing minerals occur predominantly in proximal emeralds, which also have a more incompatible trace-element signature than distal emeralds. We propose a model related to syn- to post-tectonic magmatic-hydrothermal activity. Pegmatitic bodies intruded units of the Ianapera antiform probably during tectonic relaxation. Exsolution of fluids rich in halogens and incompatible elements from the cooling pegmatites caused hydrothermal metasomatism of Cr-bearing mafic/ultramafic rocks in direct contact with the pegmatites. Local fracturing favored fluid infiltration, permitting the formation of distal mineralization. Emerald composition was controlled by the chemistry of the host rock. The presence of carbonate mineral inclusions in the emeralds and the high F-activity indicated by elevated F-contents in newly formed minerals suggest transport of Be as a fluoride-carbonate complex. It seems likely that beryl formation was triggered by precipitation of F-rich phlogopite, which removed the complexing ligand from the fluid.     

Determination of Halogens (F, Cl, Br, I), Sulfur and Water in Seventeen Geological Reference Materials

Fluorine, chlorine, bromine, iodine and sulfur were determined in seventeen geological reference materials after extraction by pyrohydrolysis. Fluorine, Cl and S (as sulfate ions) were determined in the extraction solution by ion chromatography with detection limits of around 0.2 mg l⁻¹. Bromine and I were measured by ICP-MS with detection limits of 1 μg l⁻¹ for Br and 0.1 μg l⁻¹ for I. For rock samples, using normal extraction conditions (500 mg of sample and 100 ml of final solution) detection limits were 40 mg kg⁻¹ for F and Cl, 15 mg kg⁻¹ for S, 0.2 mg kg⁻¹ for Br and 0.02 mg kg⁻¹ for I. These detection limits may be improved by increasing the amount of sample and hence the concentration of the final solution. Water was also determined using an extraction technique based on H₂O degassing, reduction on zinc at 1000 °C and H₂ manometry. Our results for fluorine, chlorine, sulfur and water are in good agreement with literature data. Very few reference materials have recommended values for bromine and especially for iodine. Among the analysed samples, three are new reference materials: BHVO-2, BCR-2 and AGV-2.     

An experimental study of the effect of boron on a water saturated haplogranite at 1 Kbar vapour pressure

An experimental study of the effect of boron in the water saturated Q-Or-Ab-B₂O₃-H₂O system has been performed at P=1 Kbar to provide experimental data and explain the role of boron in some late magmatic and early hydrothermal events. Experiments were conducted between 500° C and 800° starting from a gel, or a previously crystallized gel, and variable amounts of boron (0 to 18% B₂O₃) added to water. The phases obtained were: quartz, sanidine, albite, silicate liquid quenched to glass, and aqueous vapour phase. Boric acids, borates and isotropic low index materials were found in the quenched vapour phase. An aluminium silicate-like mineral, not yet fully identified, is also present.The solidus temperature of the Q-Or-Ab composition is lowered by 60° C when 5 wt. % B₂O₃ is added and by more than 130° C when 17wt. % B₂O₃ is added. Compositions of equilibrated silicate melts and vapours were obtained between 780° C and 750° C for various B₂O₃ concentrations. The vapour phase is B and Si rich. It is also enriched in Na with respect to K, and in alkalis with respect to Al. Its silicate solute content is higher than in experiments with pure water. The solubility of water is increased by the addition of boron in Q-Or-Ab melts. Microprobe data show that the melts equilibrated with vapour phases become hyperaluminous and more potassic than sodic. The partition coefficient of boron is in favour of the vapour (k _D=B₂O₃% in melt/B₂O₃% in vapour=0.33±0.02). The effect of the interaction between the silicate phases and the vapour is discussed. Comparison is made between the behaviour of boron and that of chlorine and fluorine. Geological applications are also provided, which concern the influence of boron on minimum melting, on muscovite stability and on the hypersolvus-subsolvus transition.     

Late Mesozoic compressional to extensional tectonics in the Yiwulüshan massif,NE China and their bearing on the Yinshan–Yanshan orogenic belt: Part II: Anisotropy of magnetic susceptibility and gravity modeling

Granitoids play an important role in deciphering both crustal growth and tectonic evolution of Earth. In the eastern end of the Yinshan–Yanshan belt of North China Craton, the Yiwulüshan massif is a typical region that presents the tectonic evolution features of this belt. Our field work on the host rocks has demonstrated two phases of opposite tectonics: compressional and extensional, however, the deformation is almost invisible in the intrusive rocks. To improve the understanding of the tectonic evolution of the Yiwulüshan massif and the Late Mesozoic tectonics of East Asia, a multidisciplinary study has been carried out. In this study, anisotropy of magnetic susceptibility (AMS) and gravity modeling have been applied on these Jurassic plutons (Lüshan, Jishilazi and Guanyindong), which intrude into the Yiwulüshan massif. According to laboratory measurements and microscopic observations on thin sections, the AMS of the Yiwulüshan massif is characterized by secondary fabrics, indicating that the intensive post solidus deformation has reset the (primary) magmatic magnetic fabrics. A relatively gentle NW dipping magnetic foliation has been identified with two distinct groups of magnetic lineations of N34°E and N335°E orientations, namely L_M1 and L_M2, relatively. Gravity modeling reveals a southward thinning of the massif with a possible feeding zone rooted in the northern part of the massif. Integrating all results from structural observation, geochronological investigation, AMS measurement and gravity modeling, two tectonic phases have been identified in the Yiwulüshan massif, posterior to the Jurassic (180–160 Ma) magmatism in the Yinshan–Yanshan area. The early one concerns a Late Jurassic–Early Cretaceous (~ 141 Ma) compressional event with a top-to-the-south to southwest sense of shear. The second one shows an Early Cretaceous (~ 126 Ma) NW–SE ductile extensional shearing. At that time, sedimentary basins widened and Jurassic plutons started to be deformed under post solidus conditions. In fact, the NW–SE trend of the maximum stretching direction is a general feature of East Asian continent during Late Mesozoic.