Метод трех направлений

Summary In [1] the author has put forward a three-direction method, a general way of adjustment of angular observations in incomplete sets by the method of extending into angular combinations, and the definition of mean weightP ^*. In this article the question is dealt with as a whole. In the three-direction methods>3 triangulation directions are measured in direction triplets 123, 234, 345,… …,s12, while in the method of measuring single angles at the station they are measured in angles 12, 23, 34, 45, …,s1. The advantage of transition from angles to direction triplets rests, besides in saving 31% of pointings, above all in certain possibility of elimination of the horizontal refraction, which follows from this. The treatise of the relation between the method of measurement and the refraction is not included into this article, as it would go beyond its scope. The fact that adjusted directions, with the exception of the stations having four directions, are not of equal weight, is proper not only to the three-direction method. The non-equality of weights is even more conspicuous in the method of measuring single angles at the station, and it appears already at the stations having four directions. In author's view the homogeneity of observation elements is more important than the homogeneity of weights from the point of view of adjustment at the station; therefore the direction triplets ought not to exist abreast with the angles in one programme, and especially the number of observations ought to be constant at one station with adjusted direction of homogeneous mean weight in the net. This transition from angles to direction triplets could also provoke a comment that simultaneous visibility of three adjoining directions occurs less often than of two such directions. The author adds to this that nowadays the causes of this phenomenon, following from unsuitable technique, must be eliminated. It is just air limpidity that ought to define the visibility, not unsufficient or everywhere equal intensity of light of reflectors, or too long sides of the triangulation net. Recent approach to this problem requires simultaneous visibility of all directions during most of the days of observation. In connection with the out-of=date technique, the methods of angular observation often have one unfavourable character: they are the cause of the accumulation of observations of “always visible” directions. The supposed merit of angles thus turns into their imperfection.

---

---

Адрес: Politickych vězňů 12, Praha 1-Nové Město     

Mercury speciation in surface and deep waters of the Mediterranean Sea

Mercury speciation and its distribution in surface and deep waters of the Mediterranean Sea were studied during two oceanographic cruises on board the Italian research vessel URANIA in summer 2003 and spring 2004 as part of the Med Oceaneor and MERCYMS projects. The study included deep water profiles of dissolved gaseous Hg (DGM), reactive Hg (RHg), total Hg (THg), monomethyl Hg (MeHg) and dimethyl Hg (DMeHg) in open ocean waters. Average concentrations of measured Hg species were characterized by seasonal and spatial variations. Overall average THg concentrations ranged between 0.41 and 2.65 pM (1.32 ± 0.48 pM) and were comparable to those obtained in previous studies of the Mediterranean Sea. A significant fraction of Hg was present as “reactive” Hg (average 0.33 ± 0.32 pM). Dissolved gaseous Hg (DGM), which consists mainly of Hg⁰, represents a considerable proportion of THg (average 20%, 0.23 ± 0.11 pM). The portion of DGM typically increased towards the bottom, especially in areas with strong tectonic activity (Alboran Sea, Strait of Sicily, Tyrrhenian Sea), indicating its geotectonic origin. No dimethyl Hg was found in surface waters down to the depth of 40 m. Below this depth, its average concentration was 2.67 ± 2.9 fM. Dissolved fractions of total Hg and MeHg were measured in filtered water samples and were 0.68 ± 0.43 pM and 0.29 ± 0.17 pM for THg and MeHg respectively. The fraction of Hg as MeHg was in average 43%, which is relatively high compared to other ocean environments. The concentrations reported in this study are among the lowest found in marine environments and the quality of analytical methods are of key importance. Speciation of Hg in sea water is of crucial importance as THg concentrations alone do not give adequate data for understanding Hg sources and cycling in marine environments. For example, photoinduced transformations are important for the presence of reactive and elemental mercury in the surface layers, biologically mediated reactions are important for the production/degradation of MeHg and DGM in the photic zones of the water column, and the data for DGM in deep sea indicate the natural sources of Hg in geotectonicaly active areas of the Mediterranean Sea.     

Hydrogen and Helium under high pressure: A case for a classical theory of dense matter

When subject to high pressure, H₂ and ³He are expected to undergo phase transitions, and to become metallic at a sufficiently high pressure. Using a semiclassical theory of dense matter proposed by Savi and Kaanin, calculations of phase transition and metallisation pressure have been performed for these two materials. In hydrogen, metallisation occurs at p _M= (3.0 ± 0.2) Mbar, while for helium the corresponding value is p _M= (106 ± 1) Mbar. A phase transition occurs in helium at p _tr= (10.0 ± 0.4) Mbar. These values are close to the results obtainable by more rigorous methods. Possibilities of experimental verification of the calculations are briefly discussed.     

The ionization balance of the Fe in the solar corona for a non-Maxwellian electron distribution function

The ionization equilibrium of the Fe in the solar corona for a non-Maxwellian electron distribution with an enhanced number of particles in the high-energy tail is presented. A parametric form of the distribution function is used to demonstrate the changes in the ionization equilibrium with changes in the shape of the distribution. The results over the range of temperature 10⁵ K T 10⁸ K for different deviations of the distribution from a Maxwellian are given in tabular form. The results can be used for specific applications in the solar corona, especially in the active corona, where deviations from the Maxwellian distribution can be significant.     

Estimating hydraulic conductivity using grain-size analyses, aquifer tests, and numerical modeling in a riverside alluvial system in South Korea

Hydraulic conductivity (K) for an alluvial system in a riverbank filtration area in Changwon City, South Korea, has been studied using grain-size distribution, pumping and slug tests, and numerical modeling. The alluvial system is composed of layers: upper fine sand, medium sand, lower fine sand, and a highly conductive sand/gravel layer at the base. The geometric mean of K for the sand/gravel layer (9.89?×?10^?4 m s^?1), as determined by grain-size analyses, was 3.33 times greater than the geometric mean obtained from pumping tests (2.97?×?10^?4 m s^?1). The geometric mean of K estimates obtained from slug tests (3.08?×?10^?6 m s^?1) was one to two orders of magnitude lower than that from pumping tests and grain-size analyses. K estimates derived from a numerical model were compared to those derived from the grain-size methods, slug tests and pumping tests in order to determine the degree of deviation from the numerical model. It is considered that the K estimates determined by the slug tests resemble the uppermost part of the alluvial deposit, whereas the K estimates obtained by grain-size analyses and pumping tests are similar to those from the numerical model for the sand/gravel layer of the riverside alluvial system.     

The development, present significance and future prospects of socialist agricultural enterprises in Slovenia

An important state sector developed in Slovenian agriculture under communism and although it accounted for a less than a tenth of the agricultural area it assumed a major role in supplying food to the urban markets; also in providing raw material to the food processing industry and for exporting. In the context of the transition to a market economy legislation has been enacted that provides for denationalisation and the restructuring of enterprises. This threatens the survival of the state sector and creates problems for the food market because the private farmers are not yet well-organised to provide an alternative supply. The government is committed by the legislation already passed but is anxious to avoid marketing problems.     

Croatia as a Danube country

Among the three principal regional units of Croatia, i.e. the elongated and spacious Adriatic littoral (with numerous islands), the relatively small and narrow mountainous belt (the Croatian transit doorway) and the Pannonian/peri-Pannonian region, the latter is the largest and accounts for 54 percent of the surface area and 66 percent of the population of Croatia (1991 census). It is part of the Pannonian (or Carpathian) basin, or the central Danube basin, so that Croatia is simply by its position a Danube country. Its Danube character is also highlighted by the fact that the Pannonian/peri-Pannonian region of Croatia through the Sava and Drava Rivers is directly linked to the navigable Danube, which is the historical and ethnic eastern boundary of Croatia. Croatia is an old historical Danube nation and country, although it has nominally appeared as a state after the break-up of Yugoslavia, and its international recognition as an independent state (1992).     

Energy balance of simple elastodynamic sources

Complete relations are derived for energy and energy flux of elastic waves generated by an isotropic and double-couple source in a perfectly elastic, homogeneous, isotropic, and unbounded medium. In the energy balance of elastodynamic sources near-field waves play an essential role, transforming static energy into wave energy, andvice versa. For explosive and dislocation sources, the sources surface radiates a positive wave energy that is partially distributed to the medium transforming into static energy. For implosive and antidislocation sources, the source surface generates elastic waves, but it does not necessarily imply that it also radiates a positive wave energy. The energy transported by waves can originate in gradual transformation of the static-to-wave energy during propagation of waves through a stressed medium.On leave from Geophysical Institute, Czech Academy of Sciences, Boní II/1401, 41 31, Praha 4 Czech Republic     

Dynamics of the plasmasphere in the dusk sector as observed in the outer ionosphere

Summary Direct measurements of the thermal plasma parameters in the topside ionosphere reveal variations of the plasmasphere boundary in the dusk sector. The ACTIVE satellite's near-polar orbits at altitudes of 500 – 1800 km around winter solstice 1989 were used to study the bulge region of the plasmasphere during intervals with different levels of geomagnetic agitation. The narrow, sharply defined trough in electron concentration corresponding to the plasmapause under quiet conditions situated at L = 6 – 7 moved to lower L-values with increasing geomagnetic activity. This narrow trough can be found in all main ion constituents. During periods of moderate geomagnetic activity, following the onset of a weak magnetic storm, a portion of the plasmaspheric bulge region was separated from the main plasmaspheric body. This can be seen in the outer ionosphere as an inner narrow trough at lower L-value. Troughs in light ions need no longer coincide with this in electron concentration. He⁺ is the most sensitive constituent reflecting the dusk sector plasmaspheric situation at this altitude.Dedicated to the Memory of Professor Karel P