Multi-proxy geoarchaeological study redefines understanding of the paleocoastlines and ancient harbours of Liman Tepe (Iskele, Turkey)

Determining the position of Liman Tepe's (ancient `Clazomenae') archaeological features relative to the coastline is important for understanding their intended function and reconstructing the character of Aegean maritime activities and sea-based trade. Previous attempts at reconstructing harbour locations at Liman Tepe relied on extrapolating paleoenvironments based on modern surface topography. In light of this, samples from a sediment coring survey and terrestrial and underwater archaeological excavations were analysed using multi-proxy geoarchaeological methods to determine paleoenvironmental facies. Micropaleontological (foraminifera), sedimentological (grain-size analysis) and geochemical (δ¹³C/δ¹⁸O) analyses resulted in the reconstruction of the coastal paleogeomorphology, including the presence and absence of ancient harbouring areas. Neither of the previous coastal reconstructions was supported by the new results. Instead, two separate harbouring areas were recognized, one coincident with the Early Bronze Age (4800–3900 years bp) and a second during the archaic and classical periods ( c. 2800–2400 years bp). These results emphasize the necessity for multi-proxy geoarchaeological studies when approaching coastal archaeological sites as a means to reconstruct paleocoastal geomorphology and understand ancient maritime development better .     

Distribution of some elements in surface soil over the Kavadarci region,Republic of Macedonia

The results of a first systematic study of spatial distribution of different elements in surface soil over of the Kavadarci region, Republic of Macedonia, known for its nickel industrial activity are reported. The investigated region (360 km²) is covered by a sampling grid of 2 × 2 km²; whereas the sampling grid of 1 × 1 km² was applied in the urban zone and around the ferronickel smelter plant (117 km²). In total 344 soil samples from 172 locations were collected. At each sampling point soil samples were collected at two depths, topsoil (0–5 cm) and bottom soil (20–30 cm). Inductively coupled plasma-mass spectrometry (ICP-MS) was applied for the determination of 36 elements (Ag, Al, As, Au, B, Ba, Bi, Ca, Cd, Co, Cr, Cu, Fe, Ga, Hg, K, La, Mn, Na, Mg, Mo, Ni, P, Pb, S, Sb, Sc, Se, Sr, Th, Tl, Ti, U, V, W and Zn). Data analysis and construction of maps were performed using the Paradox (ver. 9), Statistica (ver. 6.1), AutoDesk Map (ver. 2008) and Surfer (ver. 8.09) software. Four geogenic and three anthropogenic geochemical associations were established. Within the research, natural and anthropogenic enrichment with heavy metals was determined. Principally, the natural enrichment is related especially to Ni. Pollution by As, Cd, Co, Cr, Cu, Hg, Mo, Pb and Zn is basically insignificant.     

Origin and contrasting succession pathways of the Western Carpathian calcareous fens revealed by plant and mollusc macrofossils

Calcareous fens are unique environments whose history is almost unexplored. The radiocarbon dates of the basal layers of 49 undisturbed calcareous fens showed that in the Western Carpathians (central Europe) many of the extant fen sites originated fairly recently, with two peaks in the High Middle and Roman Ages, the former corresponding to human‐induced changes of the landscape. Conspicuous number of fens also appeared in the Lateglacial and later in the Bronze Age owing to suitable environmental conditions. The Lateglacial calcareous fens were of semi‐open character with coniferous trees, a heliophilous understorey, and mollusc communities composed of several snail species typical of glacial landscapes. We found wood of Taxus baccata in six localities between 7390 and 600 cal. a BP, suggesting that calcareous fens could have represented a refugial habitat for this red‐listed species during the middle Holocene. Using plant macrofossil and mollusc analyses of three representative profiles we illustrate the most common developmental types: (i) fens originating in the Lateglacial, having an open or semi‐open character during the whole Holocene; (ii) open fens originating as wooded wetlands; and (iii) open fens starting their development de novo in the late Holocene. Human activities were responsible for the formation of a high number of calcareous fens, especially in the Outer Western Carpathians, and became important drivers of fen biodiversity development. Only a few recently existing calcareous fens contain old sequences of calcareous deposits. They represent unique natural archives and harbour highly endangered relic populations of fen specialists, making their strict protection urgent.     

The Western Carpathians—interaction of Hercynian and Alpine processes

The complicated structural and rheologic properties of Western Carpathian lithosphere reflect the complex geodynamic history of the Carpathian orogen. Based on critical analysis of earlier models, new interpolation of existing geophysical data and results of integrated modelling, a new map of the lithosphere thickness for the Carpathian–Pannonian region has been constructed. The map allows for the distinction of a frontal orogen collision zone in the NE (from increased lithosphere thickness) as well as a zone of oblique collision with the Bohemian Massif in the West, where lithosphere is not significantly thickened. The MOHO discontinuity beneath the Western Carpathian hinterland (Danube and East Slovak Basins), as defined by deep reflection seismic profiling, is relatively shallow. This probably reflects recent crustal extension related to oblique collision between the European plate and the ALCAPA block and an increase of the asthenospheric updoming from the Middle Miocene onward.Crustal thickness reflects the combined effects of deep-seated orogenic processes and mantle thermal evolution beneath the Pannonian Basin system. In this study, we focus particularly the structures of: (1) the Late Alpine collision and Neogene back arc basin development, including deep-seated contacts between colliding plates, a zone of slab detachment, the compressional accretionary wedge of the Outer Western Carpathian Flysch Belt, and extensional structures produced by subduction rollback and asthenosphere upwelling; (2) Early Alpine structures related to Cretaceous thrust-stacking, including subhorizontal reflection packages (interpreted as multi-generational extensional structures), the underplated intra-Penninic (Oravic) continental ribbon, and ophiolite traces of the Meliatic oceanic suture; and (3) north-dipping reflectors interpreted as remnant Hercynian lithotectonic fragments with opposed vergency to the subducted Alpine units.     

Monitoring changes in shoreline position adjacent to the Hadera power station, Israel

The paper focuses on the shoreline changes following the construction of a power station cooling harbor in Hadera, Israel, and uses a statistical analysis method capable of mitigating the effect of short-term changes on the measurement of long-term changes. The changes in shoreline position detected 25 years after the harbor's construction were compared with forecasts of the Central Lab for Hydraulics of France (LCHF) in 1976, which correctly predicted the effects of the construction on the nearby coast and with studies conducted a few years after the construction. A comparison between later studies and the study described herein shows a spatial effect of the harbor on shoreline position of 750 m north of the northern breakwater. No effect was found south of the harbor. The harbor's temporal effects extend over a few years from the beginning of the construction until the coast reaches a new sedimentary equilibrium. The statistical analysis method employed was found useful for the detection of long-term changes in shoreline position such as those caused by the construction of coastal structures; it will not be suitable for the detection of long-term changes resulting from a rise in sea-level.     

Analytical expressions for Fresnel volumes and interface fresnel zones of seismic body waves. Part 2: Transmitted and converted waves. Head waves

Summary Fresnel volumes and interface Fresnel zones of transmitted and head waves are studied. The relation derived for transmitted waves may also be used for converted reflected waves. Considerable attention is devoted to the penetration of Fresnel volumes across structural interfaces, particularly for head waves.     

Insight into variability of spring and flash flood events in Lithuania

In this research, variability of spring (from 1 March to 30 May) and flash (from 1 June to 30 November) floods in rivers of different regions was analysed. The territory of Lithuania is divided into three regions according to hydrological regime of the rivers: Western, Central, and Southeastern. The maximum river discharge data of spring and flash floods [a total of 31 water gauging stations (WGS)] were analysed. Comparison of the data of four periods (1922–2013, 1941–2013, 1961–2013, and 1991–2013) with the data of the reference period (1961–1990) was performed. Analysis included the longest discharge data set of the Nemunas River at Smalininkai WGS (1812–2013) as well. Mixed patterns of flood changes in Lithuanian rivers were detected. The analysis of flood discharges of the Nemunas River indicated that both spring and flash floods in Lithuania were getting smaller.     

Status and outlook of hiking trails in the central part of the Low Tatra Mountains in Slovakia between 1980–1981 and 2013–2014

This study presents a methodology for assessment of the condition of hiking trails (HTs) and their impact zones in the central part of the Low Tatra mountain range, based on comparison of two complex data sets gathered in 33 years apart. The first field investigation was performed in 1980 and 1981, and the second in 2013 and 2014. The main goal was to perform a landscape typology in order to assess the susceptibility of landscape complexes to occurrence of anthropogenic and natural destruction processes and to assess the condition and prospects of HTs and their impacts on the adjacent alpine environment. Landscape complexes were characterised by selected abiotic, biotic and technical parameters of HTs and their impact zones. Due to the high variability of these parameters over the length of the HTs, we had to decide on how to map them. This was done using a square grid with 100 m-sized cells. For each cell with HT, the parameters were assigned the typical value within that cell. In total, 26.3 km of HT were studied, stretching over 266 grid cells. On comparison of the two data sets, it was seen that, 64% (171 grid cells) display a generally positive condition, with 54% (143 grid cells) even exhibiting significant improvement or continuously positive state of their condition. 36% (95 grid cells) were in bad condition, including 3% (9 grid cells) whose state had deteriorated, and 2% (6 grid cells) whose state had significantly deteriorated, in the time between the two assessments.     

The geopotential value <Emphasis Type="Italic">W</Emphasis><Subscript>0</Subscript> for specifying the relativistic atomic time scale and a global vertical reference system

The TOPEX/Poseidon (T/P) satellite alti- meter mission marked a new era in determining the geopotential constant W ₀. On the basis of T/P data during 1993–2003 (cycles 11–414), long-term variations in W ₀ have been investigated. The rounded value W ₀ = 62636856.0 ± 0.5) m ² s ⁻² has already been adopted by the International Astronomical Union for the definition of the constant L _G = W ₀/c ² = 6.969290134 × 10⁻¹⁰ (where c is the speed of light), which is required for the realization of the relativistic atomic time scale. The constant L _G , based on the above value of W ₀, is also included in the 2003 International Earth Rotation and Reference Frames Service conventions. It has also been suggested that W ₀ is used to specify a global vertical reference system (GVRS). W ₀ ensures the consistency with the International Terrestrial Reference System, i.e. after adopting W ₀, along with the geocentric gravitational constant (GM), the Earth’s rotational velocity (ω) and the second zonal geopotential coefficient (J ₂) as primary constants (parameters), then the ellipsoidal parameters (a,α) can be computed and adopted as derived parameters. The scale of the International Terrestrial Reference Frame 2000 (ITRF2000) has also been specified with the use of W ₀ to be consistent with the geocentric coordinate time. As an example of using W ₀ for a GVRS realization, the geopotential difference between the adopted W ₀ and the geopotential at the Rimouski tide-gauge point, specifying the North American Vertical Datum 1988 (NAVD88), has been estimated.     

High density neighborhoods: Who enjoys them?

To date, research into the subjective aspects of high density has focused mainly on the negative consequences of overcrowding. This study, in contrast, outlines some of the positive aspects of high density in neighborhoods, exploring the physical–spatial environment of two neighborhoods in the city of Haifa, Israel. It was found that while the relatively high residential density was similar in both neighborhoods (40 housing units per acre), this was more positively evaluated in one neighborhood as compared to the other. This can be attributed to some specific environmental and planning features. In particular, where physical planning enabled the potential advantages of high density to be realized, this was positively perceived and evaluated by local residents. Such advantages mainly comprised accessibility to a variety of services, more frequent public transportation, and access to open spaces within walking distance. Particularly advantageous were the increased opportunities for social gathering. At the same time, however, high density did not foster social relationships on the neighborhood level. The study further identified the gender and age groups that benefited most from the high density. Thus, women evaluated high density more positively than men. Young families with children and senior citizens (over 65) were also more likely to benefit, and to evaluate the high density environment more positively than other social groups.