Island shadow effects and the wave climate of the Western Tuamotu Archipelago (French Polynesia) inferred from altimetry and numerical model data

To implement a numerical model of atoll lagoon circulation, we characterized first the significant wave height (Hs) regime of the Western Tuamotu Archipelago and the local attenuation due to the protection offered by large atolls in the south Tuamotu. Altimetry satellite data and a WAVEWATCH III two-way nested wave model at 5km resolution from 2000 to 2010 were used. Correlation between altimetry and model was high (0.88) over the period. According to the wave model, the archipelago inner seas experienced attenuated Hs year-long with a yearly average Hs around 1.3m vs a minimum of 1.6m elsewhere. The island shadow effect is especially significant in the austral winter. In contrast with southern atolls, Western Tuamotu experienced only few days per year of Hs larger than 2.5m generated by very high Hs southern swell, transient western local storms, strong easterly winds, and during the passage of distant hurricanes.     

Seismic Ground Motion Expected for the Eastern District of Naples

The seismic ground motion of a test area in the eastern district of Naples is computed with a hybrid technique based on the mode summation and the finite difference methods. This technique allows us the realistic modelling of source and propagation effects, including local soil conditions. In the modelling, we consider the 1980 Irpinia earthquake, a good example of strong shaking for the area of Naples, which is located about 90 km from the epicenter.The detailed geological setting is reconstructed from a large number of drillings. The sub-soil is mainly formed by alluvial (ash, stratified sand and peat) and pyroclastic materials overlying a pyroclastic rock (yellow neapolitan tuff), representing the neapolitan bedrock. The detailed information available on mechanical properties of the sub-soil and its geometry warrants the application of the sophisticated hybrid technique.As expected, the sedimentary cover causes an increase of the signal's amplitudes and duration. If thin peat layers are present, the amplification effects are reduced, and the peak ground accelerations are similar to those observed for the bedrock model. This can be explained by the backscattering of wave energy at such layers, that tend to seismically decouple the upper from the lower part of the structure.For SH-waves, the influence of the variations of the S-wave velocities on the spectral amplification is studied, by considering locally measured velocities and values determined from near-by down-hole measurements. The comparison between the computed spectral amplifications confirms the key role of an accurate determination of the seismic velocities of the different layers.The comparison performed between a realistic 2-D seismic response and a standard 1-D response, based on the vertical propagation of waves in a plane layered structure, shows considerable difference, from which it is evident that serious caution must be taken in the modelling of expected ground motion at a specific site.     

Numerical simulation of undersea cable dynamics

A fully three-dimensional code has been written to compute the motion of a towed cable. The code is based on a robust and stable finite difference approximation to the differential equations derived from basic dynamics. A 3500-ft (1.07 km) cable pulled at 18.5 knots (34.3 km hr⁻¹) through a circular turn of 700 yd (0.64 km) radius has been computed in about half of the real time of the maneuver. The computed displacements are close to the measured ones; the changes in depth are within 2%.     

Chemical denudation rates in Kärkevagge, Swedish Lapland

This study examines the spatial and temporal variability of chemical denudation rates in Kärkevagge, northern Sweden. The chemical flux rates within the valley are strongly influenced by the local geology. Chemical denudation rates determined for the study period are more than double those previously reported in the literature for this valley. Rates of greater than 46t km⁻² a⁻¹ were measured at the valley mouth over the course of the melt season. This difference is likely due to differences in measurement technique compared to that used by past researchers. This rate is also much higher than for other arctic and alpine watersheds. Chemical denudation in Kärkevagge is comparable to larger temperate rivers. The rapid chemical denudation in Kärkevagge is likely due to sulfide weathering creating acid solutions.     

An expanded surface-water palaeotemperature inference model for use with fossil midges from eastern Canada

Using an expanded surface sample data set, representing lakes distributed across a transect from southernmost Canada to the Canadian High Arctic, a revised midge-palaeotemperature inference model was developed for eastern Canada. Modelling trials with weighted averaging (with classical and inverse deshrinking; with and without tolerance downweighting) and weighted averaging partial least squares (WA-PLS) regression, with and without square-root transformation of the species data, were used to identify the best model. Comparison of measured and predicted temperatures revealed that a 2 component WA-PLS model for square-root transformed percentage species data provided the model with the highest explained variance (r =0.88) and the lowest error estimate (RMSEP _jack =2.26 °C). Comparison of temperature inferences based on the new and old models indicates that the original model may have seriously under-estimated the magnitude of late-glacial temperature oscillations in Atlantic Canada. The new inferences suggest that summer surface water temperatures in Splan Pond, New Brunswick were approximately 10 to 12 °C immediately following deglaciation and during the Younger Dryas. During the Allerod and early Holocene, surface water temperatures of 20 to 24 °C were attained. The new model thus provides the basis for more accurate palaeotemperature reconstructions throughout easternmost Canada.     

Cryptotephra from the 74 ka BP Toba super-eruption in the Billa Surgam caves,southern India

The ～74 ka BP Youngest Toba Tuff (YTT), from the largest known Quaternary volcanic eruption, has been found for the first time as a non-visible (crypto-) tephra layer within the Billa Surgam caves, southern India. The occurrence of the YTT layer in Charnel House Cave provides the first calendrical age estimate for this much debated Pleistocene faunal sequence and demonstrates the first successful application of cryptotephrochronology within a cave sequence. The YTT layer lies ～50 cm below a major sedimentological change, which is related to global cooling around the MIS 5 to MIS 4 transition. Using this isochronous event layer the Billa Surgam Cave record can be directly correlated with other archaeological sites in peninsular India and palaeoenvironmental archives across southern Asia.     

Anomalous luminescence of subglacial sediment at Haut Glacier d'Arolla,Switzerland – a consequence of resetting at the glacier bed?

Swift, D. A., Sanderson, D. C. W., Nienow, P. W., Bingham, R. G. & Cochrane, I. C. 2010: Anomalous luminescence of subglacial sediment at Haut Glacier d'Arolla, Switzerland – a consequence of resetting at the glacier bed? Boreas, Vol. 40, pp. 446–458. 10.1111/j.1502‐3885.2010.00196.x. ISSN 0300‐9483. Luminescence has the potential to elucidate glacial geomorphic processes because primary glacial sediment sources and transport pathways are associated with contrasting degrees of exposure to light. Most notably, sediment entrained from extraglacial sources should be at least partially reset, whereas sediment produced by glacial erosion of subglacial bedrock should retain substantial luminescence commensurate with a geological irradiation history. We set out to test the validity of this assumption at Haut Glacier d'Arolla, Switzerland using sediment sampled extraglacially and from the glacier bed. Contrary to our expectations, the subglacial samples exhibited natural signals that were substantially lower than those of other sample groups, and further (albeit limited) analyses have indicated no obvious differences in sample‐group luminescence characteristics or behaviour that could account for this observation. For glaciological reasons, we can eliminate the possibilities that the subglacial sediment has been extraglacially reset or exposed in situ to heat or light. We therefore advocate investigation of possible resetting processes related to subglacial crushing and grinding, and speculate that such processes, if more generally present, may enable the dating of subglacially deposited tills using luminescence‐based techniques.     

Performance of seismically loaded shearwalls on nonlinear shallow foundations

If utilized, the energy dissipative capability of seismically loaded shallow foundations due to inelastic behavior can result in more economic design, provided the consequences, such as excessive deformations are accounted for. In this article, a Beam‐on‐Nonlinear‐Winkler‐Foundation (BNWF) model is used to assess the performance of shearwall‐foundation systems with different attributes, when subjected to ground motions of varied hazard levels. The numerical study indicates that the force and drift demands to the shearwall reduce significantly, when nonlinear foundation behavior is realized, while permanent settlement is well below the permissible limit. These results support the concept of shallow foundation capacity mobilization in future design. Copyright © 2010 John Wiley & Sons, Ltd.     

Hanford tank residual waste – Contaminant source terms and release models

Residual waste is expected to be left in 177 underground storage tanks after closure at the US Department of Energy’s Hanford Site in Washington State, USA. In the long term, the residual wastes may represent a potential source of contamination to the subsurface environment. Residual materials that cannot be completely removed during the tank closure process are being studied to identify and characterize the solid phases and estimate the release of contaminants from these solids to water that might enter the closed tanks in the future. As of the end of 2009, residual waste from five tanks has been evaluated. Residual wastes from adjacent tanks C-202 and C-203 have high U concentrations of 24 and 59 wt.%, respectively, while residual wastes from nearby tanks C-103 and C-106 have low U concentrations of 0.4 and 0.03 wt.%, respectively. Aluminum concentrations are high (8.2–29.1 wt.%) in some tanks (C-103, C-106, and S-112) and relatively low (<1.5 wt.%) in other tanks (C-202 and C-203). Gibbsite is a common mineral in tanks with high Al concentrations, while non-crystalline U–Na–C–O–P ± H phases are common in the U-rich residual wastes from tanks C-202 and C-203. Iron oxides/hydroxides have been identified in all residual waste samples studied to date. Contaminant release from the residual wastes was studied by conducting batch leach tests using distilled deionized water, a Ca(OH)₂-saturated solution, or a CaCO₃-saturated water. Uranium release concentrations are highly dependent on waste and leachant compositions with dissolved U concentrations one or two orders of magnitude higher in the tests with high U residual wastes, and also higher when leached with the CaCO₃-saturated solution than with the Ca(OH)₂-saturated solution. Technetium leachability is not as strongly dependent on the concentration of Tc in the waste, and it appears to be slightly more leachable by the Ca(OH)₂-saturated solution than by the CaCO₃-saturated solution. In general, Tc is much less leachable (<10 wt.% of the available mass in the waste) than previously predicted. This may be due to the coprecipitation of trace concentrations of Tc in relatively insoluble phases such as Fe oxide/hydroxide solids.