Settling and compaction of chromite cumulates employing a centrifuging piston cylinder and application to layered mafic intrusions

The time scales and mechanics of gravitationally driven crystal settling and compaction is investigated through high temperature (1,280–1,500 °C) centrifuge-assisted experiments on a chromite-basalt melt system at 100–1,500g (0.5 GPa). Subsequently, the feasibility of this process for the formation of dense chromite cumulate layers in large layered mafic intrusions (LMIs) is assessed. Centrifugation leads to a single cumulate layer formed at the gravitational bottom of the capsule. The experimentally observed mechanical settling velocity of a suspension of ~24 vol% chromite is calculated to be about half (~0.53) of the Stokes settling velocity, with a sedimentation exponent n of 2.35 (3). Gravitational settling leads to an orthocumulate layer with a porosity of 0.52 (all porosities as fraction). Formation times for such a layer from a magma with initial chromite contents of 0.1–1 vol% are 140–3.5 days, equal to a growth rate of 0.007–0.3 m/day for grain sizes of 1–2 mm. More compacted chromite layers form with increasing centrifugation time and acceleration through chemical compaction: An increase of grain contact areas and grain sizes together with a decrease in porosity is best explained by pressure dissolution at grain contacts, reprecipitation and grain growth into the intergranular space and a concomitant expulsion of intergranular melt. The relation between the porosity in the cumulate pile and effective pressure integrated over time (Δρ · h · a · t) is best fit with a logarithmic function, in fact confirming that a (pressure) dissolution–reprecipitation process is the dominant mechanism of compaction. The experimentally derived equation allows calculating compaction times: 70–80 % chromite at the bottom of a 1-m-thick chromite layer are reached after 9–250 years, whereas equivalent compaction times are 0.2–0.9 years for olivine (both for 2 mm grain size). The experiments allow to determine the bulk viscosities of chromite and olivine cumulates to be of magnitude 10⁹ Pa s, much lower than previously reported. As long as melt escape from the compacting cumulate remains homogeneous, fluidization does not play any role; however, channelized melt flow may lead to suspension and upward movement of cumulate crystals. In LMIs, chromitite layers are typically part of a sequence with layers of mafic minerals, compaction occurs under the additional weight of the overlying layers and can be achieved in a few years to decades.     

Debating clean energy: Frames,counter frames,and audiences

In the United States, both scholars and practitioners have repeatedly emphasized the importance of “issue framing” for garnering public support for climate change policy. However, the debate frequently overlooks the importance of counter frames. For every framing attempt by advocates of climate policy, there will be a counter frame by the opponents of climate policy. How do counter frames influence the effectiveness of issue framing as a communication strategy? To answer this question, we report results from a survey experiment on a nationally representative sample of 1000 Americans on clean energy policy, a key policy issue in the public debate on climate change in the United States. Overall, we find that different combinations of positive and negative frames have remarkably little effect on support for clean energy policy. A follow-up on-line survey experiment with a convenience sample of 2000 Americans suggests that the counter frames are responsible for undermining the effects of the original frames.     

Profiles of blue and infrared diffuse interstellar bands

The paper presents a survey of profiles of reasonably strong diffuse interstellar bands (DIBs) based on the extensive set of high-resolution spectra acquired with the aid of echelle spectrographs installed at the 2-m Terskol, 2-m Pic du Midi and 1-m SAO telescopes. The surveyed diffuse interstellar bands cover the spectral ranges of blue and near-infrared, i.e the DIBs not surveyed by Krełowski & Schmidt . The possible modifications caused by stellar and telluric lines are discussed. The very broad features such as 4430 are not discussed because the shapes of their profiles, extracted from echelle spectra, are very uncertain. The signal-to-noise (S/N) ratios of the spectra are not high enough to enable discussion of the profiles of numerous weak interstellar features discovered recently.     

Determination of Phobos’ rotational parameters by an inertial frame bundle block adjustment

A functional model for a bundle block adjustment in the inertial reference frame was developed, implemented and tested. This approach enables the determination of rotation parameters of planetary bodies on the basis of photogrammetric observations. Tests with a self-consistent synthetic data set showed that the implementation converges reliably toward the expected values of the introduced unknown parameters of the adjustment, e.g., spin pole orientation, and that it can cope with typical observational errors in the data. We applied the model to a data set of Phobos using images from the Mars Express and the Viking mission. With Phobos being in a locked rotation, we computed a forced libration amplitude of \(1.14^\circ \pm 0.03^\circ \) together with a control point network of 685 points.     

3XMM J185246.6+003317 as transient neutron star

We performed an X‐ray timing and spectral analysis of the variable source 3XMM J185246.6+003317 to investigate its physical nature. The data from all observations of 3XMMJ185246.6+003317 conducted by XMM‐Newton EPIC MOS1 and MOS2 with the same instrumental setup in 2004–2009 were reprocessed to form a homogenous data set of solar barycenter corrected photon arrival times and high S/N spectra of 3XMM J185246.6+003317. A Bayesian method for the search, detection, and estimation of the parameters of a periodic signal of unknown shape was employed, as developed by Gregory & Loredo (1992, 1993). The results show that 3XMM J185246.6+003317 is a transient neutron star with the genuine spin‐period of 23.11722 (23.11711–23.11727) s and its derivative of 5.3(0.3–5.5)×10^–11 s s^–1, implying a characteristic age of 7 (6–104) kyr, if the period derivative can be ascribed to the genuine spin‐down rate of the neutron star. The rotational‐phase averaged X‐ray spectra at the different brightness periods can be fitted with a highly absorbed blackbody model with different temperatures. The phase‐folded light curves in different energy bands with high S/N ratio show a double‐peaked profile; the variations depend on time and energy, indicating that radiation emerges from at least two emitting areas. The spectra at the phases corresponding to the maxima in the phase‐folded light curve show different spectral parameters of absorbed blackbody radiation, i.e. the hotter one has a smaller size. The source is detected only from September 2008 to April 2009 with persistently decreasing brightness, but not before, even though it was observed by XMM. Hence, it is a transient neutron star or a binary system hosting it. (© 2015 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Instruments, Detectors and the Future of Astronomy with Large Ground Based Telescopes

Results of a survey of instrumentation and detector systems, either currently deployed or planned for use at telescopes larger than 3.5 m, in ground based observatories world-wide, are presented. This survey revealed a number of instrumentation design trends at optical, near, and mid-infrared wavelengths. Some of the most prominent trends include the development of vastly larger optical detector systems (> 10⁹ pixels) than anything built to date, and the frequent use of mosaics of near-infrared detectors – something that was quite rare only a decade ago in astronomy. Some future science applications for detectors are then explored, in an attempt to build a bridge between current detectors and what will be needed to support the research ambitions of astronomers in the future.     

First Results from SWAN Lyman α solar wind mapper on SOHO

After one year of almost flawless operation on board the SOHO spacecraft poised at L1 Lagrange point, we report the main features of SWAN observations. SWAN is mainly dedicated to the monitoring of the latitude distribution of the solar wind by the Lα method. Maps of sky Lα emissions were recorded througout the year. The region of maximum emission, located in the upwind hemisphere, deviates strongly from the pattern that could be expected from a solar wind constant with latitude. It is divided into two lobes by a depression aligned with the solar equatorial plane called the Lyα groove already noted in 1976 Prognoz data. The north lobe is much brighter than the south lobe. These two characteristics can be explained qualitatively by an enhanced ionization along the neutral sheet where the slow solar wind is concentrated, which results from the higher low-latitude solar wind mass flux as measured by Ulysses. The groove is the direct imprint on the sky of the enhanced carving by the slow solar wind, at this time of solar minimum, when the tilt angle of the neutral sheet is small. The question is still pending to predict what will happen with the ascending phase of the solar cycle. Observations of comets are briefly mentioned, with the ability of SWAN to monitor the H₂O production of many comets. Operations of the instrument are briefly described, including some instrumental problems which could be solved by software modifications sent to the instrument. Supplementary material to this paper is available in electronic form at http://dx.doi.org/10.1023/A:1004979605559     

The impact of fragment “L” of comet SL-9 on Jupiter

Filtergrams of high spatial and temporal resolution were obtained in the methane band centred at 892 nm during the impact of fragment L of comet Shoemaker-Levy 9 on Jupiter. The light curve shows two maxima of an emission ball observed above the limb shortly after the impact. The second maximum was the brightest and had a short life time of about 90 seconds. During it's life, the apparent height of the emission ball declined towards the surface of Jupiter; the amount of displacement is larger than the expected effect caused by Jupiter's rotation. About half an hour after the impact, a domelike feature became visible when the location of the impact rotated into the illuminated hemisphere of Jupiter.     

An Observational Study of Contact Binaries with Large Temperature Differences Between Components

In this paper we investigate a sample of contact eclipsing binary systems, which exhibit a large temperature difference (at least 1000 K) between the components. Considering the effective temperature of the primary star, the systems were divided into three groups. We applied a Monte Carlo method as a more suitable procedure for the search of the system configurations previously known as contact binaries with a large temperature difference and with a negligible value of the filling factor. Using only data presented in the literature, we found that the geometrical configuration of almost all systems from the second group is near-contact rather than contact.     

Literal solution for Hill's lunar problem

A computer program for the manipulation of power series in several variables is used to find the first order solution to Hill's lunar problem. The ratiom of the mean motion of the Sun to that of the Moon is kept as a formal parameter. The series inm are known to converge very poorly. It is shown how efficient algorithms among them the Lie transformation allow us to compute the series inm as far as they are needed. When the series are evaluated at Brown's numerical value form the results achieve or exceed his accuracy.